matias StageScape M20D Digital Mixer User Manual
- June 12, 2024
- matias
Table of Contents
matias StageScape M20D Digital Mixer User Manual
Charge it first
Charge the mouse from a computer or USB-C charger. A full charge from empty takes 5 hours, and lasts approximately 3 years (in typical use)
Nano Receiver stays plugged in
Setup is simple… Plug the Nano Receiver into your computer, then turn on the mouse. The Nano Receiver stays plugged in, for instant wireless reconnects — plus its small size makes it perfect for notebook users. Press the POWER button to turn ON / OFF. The Indicator Light will flash… Green to indicate ON or
Amber to indicate OFF
When your laptop is in a bag turn OFF the mouse
To ensure that your mouse DOESN’T wake your LAPTOP from SLEEP while in your bag, remember to turn the mouse OFF before stowing it.
What the Indicator Lights mean…
Flashing Green (1-2-3) Mouse ON
Flashing Amber (1-2-3) Mouse OFF
3 Flashes Battery at / near FULL charge
2 Flashes Battery HIGHER than 50%
1 Flash Battery less than 50%
Flashing Red Mouse NEEDS charging
Flashing Blue Pairing mode
Tracking Speed & Scrolling Speed
You can adjust mouse tracking and scroll speed, in the system settings…
Mac:
menu > System Settings > Mouse
PC:
Windows menu > Settings> Bluetooth & devices > Mouse
Aluminum Button ( behind the scroll wheel )
On PC, the Aluminum button is the Back button.
On Mac, you can choose what the Aluminum button does, via the system settings:
menu > System Settings > Mouse
How to Pair to a new Nano Receiver
Your mouse is ALREADY paired to the receiver it came with, so you can skip this step, unless there are special circumstances — for example, pairing to a new replacement receiver.
You can pair any number of Matias mice or keyboards to the same Nano Receiver. This is especially convenient for laptop users. For example, if you have a keyboard / mouse setup at home, and another at the office, you can plug one Nano Receiver into your laptop and pair all the devices to that one receiver. Paired devices will automatically connect when they are in range.
- Unplug any receivers that may be in range of the mouse.
- Press & hold BOTH the Aluminum button AND the POWER button UNTIL the indicator light starts flashing Blue.
- Plug the Nano Reciver into your computer.
- When the indicator light stops flashing, pairing is complete.
If you’ve lost your Nano Receiver
We have replacement receivers available.
Please contact… [email protected]
Need help?
Please contact us at: [email protected]
+1 905-265-8844 or toll free
1-888-663-4263
Ergonomics
www.matias.ca/health
Warranty
Matias Corporation (“Matias”) warrants to the original end user (“Customer”) that this product will be free from defects in workmanship and materials, under normal use, for 2 years from the date of original purchase from Matias or its authorized reseller. Matias’ sole obligation under this express warranty shall be (at Matias’ option and expense) to repair or replace the product or part with a comparable product or part. All products or parts that are replaced become the property of Matias.
LIMITATION OF LIABILITY
To the full extent allowed by law, Matias excludes for itself and its
suppliers any liability (whether based in contract or in tort, including
negligence) for incidental, consequential, indirect, special or punitive
damages of any kind, or for loss of revenue or profits, loss of business, loss
of information or data, or other financial loss arising out of or in
connection with the sale, installation, maintenance, use, performance,
failure, or interruption of this product, even if Matias or its authorized
reseller has been advised of the possibility of such damages, and limits its
liability to replacement, repair, or refund of the purchase price paid, at
Matias’ option. This disclaimer of liability for damages will not be affected
if any remedy provided herein shall fail of its essential purpose.
This keyboard contains no user-serviceable parts, and should not be opened or disassembled — risking damage to it and injury to you. Do NOT remove, crush, or puncture the battery inside, or expose it to high temperatures or liquids.
When this product reaches its end of life, please dispose of it according to your local environmental laws and guidelines. The lithium-ion battery in the keyboard should be recycled or disposed of separately from household waste, by a qualified service provider.
FCC ID: WKM-M20D
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no- collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This product complies with the requirements of European Directives 72/23/EEC, 89/336/EEC, and 1999/5/EC.
Copyright © 2023 Matias Corp. All rights reserved. Matias, wireless USB-C mouse, wireless PBT mouse, and the Matias logo are trademarks of the Matias Corporation. Mac, Apple, and the Apple logo are trademarks of Apple Inc. Windows is a trademark of Microsoft Corporation.
Warranty Procedure
- Please contact our Help Desk at [email protected], 905-265-8844 or toll-free 1-888-663-4263, and give a detailed explanation of the problem.
- We’ll first try to solve your problem by e-mail or phone.
- If e-mail / phone support is not successful, or if the item is defective, we’ll give you an EMA number (Exchange Merchandise Authorization), and explain how to return the product for a replacement.
- For more information, please visit:
www.matias.ca/returns