SOSEN INNOVATION PE-1000 Series Portable Power Station User Manual
- June 12, 2024
- SOSEN INNOVATION
Table of Contents
PE-1000 series
Portable Power Station
User Manual 
Please read this manual before use
and follow its guidance.
Keep this manual for future reference.
Declaration
- Please read this ENTIRE User Manual carefully before using the product to ensure that you completely understand the product and can correctly use it. After reading this user manual, keep it properly for future reference. Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss. Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document. SOSEN INNOVATION is not liable for any losscaused by the user’s failure to use this product in compliance with this User Manual.
- In compliance with laws and regulations, SOSEN INNOVATION reserves the right to final interpretation of this document and all documents related to this product. This document is subject to changes (revisions, updates, or termination) without prior notice. Please visit SOSEN INNOVATION’s official website to obtain the latest product information.
Important Safety Instructions
2.1 Usage
-
Before using this product, please be sure to read ENTIRE User Manual and check all materials. If the equipment is damaged, cracked, electric leakage, AC disconnection and other abnormal conditions, please stop using it immediately.
-
Do not use the product near a heat source, such as a fire source or a heating furnace.
-
Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the product in rain or humid environments.
-
Do not use the product in an environment with strong static electricity/magnetic fields.
-
Do not disassemble the product in any way or pierce the product with sharp objects.
-
Avoid using wires or other meta objects that may result in a short circuit.
-
Do not use unofficial components or accessories.If you need to replace any components or accessories, please visit official SOSEN INNOVATION channels to check relevant information.
-
Do not stack any heavy objects on top of the product.
-
Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
-
When using the product, please strictly follow the operating environment temperature specified in this User Manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
-
Please avoid impact, falls, or severe vibrations when using the product, In case of a severe external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts.
-
If you accidentally drop the product into water during use, please place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again, and should be properly disposed of according to Section 2.2 below.If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
-
Use a dry cloth to clean off dirt on the product ports.
-
Rest the product on a flat surface to avoid damages caused by the product falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from combustible matter and people, and
dispose of it in accordance with local laws and regulations. -
Ensure that product is kept out of reach of children and pets when no adult around.
-
Store the product in a clean, dry and ventilated place.
-
It is recommended to use moisture barrier bags in wet environments (for example, places by the sea or waterways) to prevent the product from getting soaked.If water is found inside the product.it must not be used or turned on again. Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof and open area. Once complete, contact SOSEN INNOVATION Customer Service immediately.
-
This product is not recommended for powering medical emergency equipment related to personal safety, including but not limited to medical grade ventilators (hospital version CPAP: Continuous Positive Airway Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your doctor’s instructions and consult with the manufacturer for restrictions on the use of the equipment if used for general medical equipment, please be sure to monitor the power status to ensure that the power does not run out.
-
When in use, power supply products will generate electromagnetic fields, which are likely to affect the normal operation of medical implants or personal medical equipment such as pacemakers.cochlear implants, hearing aids, defibrillators etc. If these types of medical equipment are being used, please contact the manufacturer to inquire about any restrictions on the use of such equipment. These measure are fundamental to ensure a safe distance between the medical implants(for example, pacemakers, cochlear implants, hearing aids, defibrillators etc.) and this product while in use.
-
When the power supply is connected in normal mode to a refrigerator, power fluctuations may cause the power supply to automatically shut down. When connecting the power supply to a refrigerator that stores medicine, vaccines or other valuable items, it is recommended to set the AC output to “Always on” in the app. This helps support a continuous power supply and ensures a safe and efficient power consumption state.
2.2 Disposal Guide
- If conditions permit, make sure that the battery is fully discharged before disposing it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
- If the battery cannot be fully discharged due to a product failure, please do not dispose of the battery directly in the battery recycling box. In such case, you should contact a professional battery recycling company for further processing.
- Please dispose of over-discharged batteries that cannot be recharged.
What’s In the Box
Getting Started
4.1 Product Introduction
This product is our company’s latest research and development of PE-1000
series portable power station, born in the ultimate innovation and mature
technology. The company follows the national industry certification
standards.Equipped with 1000W power inverter and 1008Wh lithium iron phosphate
battery pack, it generate pure sine wave AC output.it also supports ECO mode,
where AC output or DC output automatically turns off in low power discharging
or no load to save capacity discharging. The product design is ergonomic, and
the lifting is more labor-saving. Overall, this product is the best choice of
portable power station, to meet your emergency backup and outdoor needs as
much as possible.
4.2 Product Features
- Automobile Grade Battery Cells
- Pure Sine Wave, Appliances Friendly
- Ergonomically Designed, Easy to Carry
- Long Cycle life : ＞2500 times
- Bidirectional Inverter Technology
- Fast Charging : charging 80% < 1 h
- 8 Safety BMS Protection Modes
- ECO Mode (can set at APP)
- 4 Recharging Ways
- 4 Charging Ways
- 10 Output Ports
4.3 Product Specifications
General Specification
Model| PE-1000
Capacity| 1008Wh
Rated Power| 1000W
Dimensions| 360 x 186 x 226 mm
Net Weight| 13.6kg
Gross Weight| 16kg
Certifications| CE, RoHS, FCC, PSE, UL UN38.3 (According to different country
)
WiFi| None
Bluetooth| Support
Housing| Aluminum6063 unit body/PC+ABS
Monitor| LCD
Color| Optional
Stand-by Power Consumption| < 5W
Recharging and Charging at the same time| Support
Output Ports (Charging Port)
AC (X2)
Pure Sine Wave| 1000W 10A (Total)
AC Output 50/60Hz (100-120V version)
1000W 4.5A (Total)
AC Output 50/60Hz (220-240V version)
USB-A (X2)| 5V— 2.4A (per port)
USB-A (X2) (Fast Charge)| 5V— 3A I9V— 2A112V— 1.5A ( 18W Max )
USB-C (x1) (Bidirectional)| 5/9/12/15V— 3A I 20V— 5A ( 100W Max )
DC5521 (X3)| 13.6V— 5A (Total 10A)
Input Pods (Recharging Port)
AC Charger (X1)| 50Hz/60Hz 10A 1000W (100-120V version)
50Hz/60Hz 5A 1000W (220-240V version)
Solar/Car Charger (X1)| 11-55V-10A 300W
USB-C Charger (X1)| 9V— 2A 12V— 1.5A 20V— 5A (100W Max)
Battery Info
Cell Chemistry| LFP(LiFePO4)
Cycle Life| >2500 cycles
Protection Type| Over Voltage/Over Current/Over Charge/ Over
Discharge/Overload/Short Circuit /
High Temperature/Low Temperature Protection
Environmental Operating Temperature
Charge Temperature| Or-+45t (32T- 113T)
Discharge Temperature| -20t- +45-C (-4T- 113T)
Storage Temperature| -20t- teat (-4T- 140T)
Operating Temperature| 20 t- +35t (68T- 86T )
Operating Humidity| 5-90%
Storage Humidity| 5-95%
Altitude of Operation| 2000meter
Heat-dissipating method| Smart Forced Air Cooling
IP levels| IP20
Additional Connections
Smart Battery Extension| Support (Sold Separately)
4.4 Product Overview
The type of AC
output socket varies in different countries or regions, the picture above is
for illustration only, please refer to the actual product.
4.5 Product LCD Screen
| Icon | Name | State |
|---|---|---|
| Remaining |
Battery
Percentage| Charging:Rotating
Clockwise Full
Charged: 100%
TO FULL| Recharging| Power Station is Recharging
TO EMPTY| Charging| Power Station is Charging Your Device
| Fan| ON: Smart Cooling
OFF: Normal Blink Fan Failure
| Bluetooth/WiFi| ON: Bluetooth or WiFi is connected (this is optional)
| Wireless Charging| ON: device is in wireless charging (this is optional)
Refer to “Troubleshooting” for details.
4.6 Product Power ON/OFF
Power ON : Press down and hold the Main Power button at least 3 seconds to
turn on the product, then the LCD screen lights up and the battery indicator
icon shows up.
Power OFF : Press down and hold the Main Power button for at least 3 seconds
to turn off the product.
****
- After Main Power is turned on, the small main power indicator led will enter breathing mode and the LCD display is ON.
- If the product is not used for 5 minutes, it will enter sleep mode with the LCD screen shut off. When you start to use the product again, the LCD screen will turn on automatically.
- The product defaults to 2 hours of standby time. With all the output power buttons turned off and no other load for 2 hours, the product will shut off automatically.You can set the standby duration in the app.
4.7 LED Light
Short Press the LED ON/OFF button to switch to LED light different
mode.
4.8 Charging Your
Device
Make Sure Main Power is turned ON, then start below steps.
4.8.1 USB Charging (100W Max )
- Short Press the USB ON/OFF button to active USB output
- Connect your devices to the USB output ports
- After devices finis charged,Short press USB ON/OFF button to shut down USB output
4.8.2 AC Charging
(1000W Max)
- Short Press the AC ON/OFF button to active AC output
- Connect your devices to the AC output ports
- After devices finish charging, Short press AC ON/OFF button to shut down AC
When AC output is active, even there is no device in charging, it still have
power consuming. It is recommend to shutdown AC output when no device in
charging. (AC output socket varies in different countries or regions,the
picture above is for illustration only, please refer to the actual
product.)
4.8.4 DC Charging
(10A Max)
- Short Press the 13.6V ON/OFF button to active DC output
- Connect your devices to the DC output ports via DC cable
- After devices finis charged, Short press 13.6V ON/OFF button to shut down DC output
4.9 Recharge Your Power
Station
4.9.1 AC Recharging (1000W Max)
Recharge your power station by connecting to a wall outlet with the AC
charging cable.
4.9.2 Car
Recharging (300W Max)
Recharge your power station by connecting to a wall outlet with the AC
charging cable.
4.9.3 Solar Panel
Recharging (300W Max)
Recharge your power station by connecting up to (1 or 2pcs) 200W solar panels
in parallel with a solar charging cable(MC4 connector).
4.9.4
USB-C Recharging (100W Max)
Recharge your power station by connecting it to a charger via the USB-C
port.
4.10 EPS
(Emergency Power Supply)
** Provide a basic UPS function, this function does not support 0ms
switching. Please do not connect the product to any device that requires 0ms
UPS, such as data servers and workstations. Please test and confirm the
compatibility before using the product. We recommend that you only charge one
device at a time and avoid using multiple ones at the same time to avoid
overload protection. SOSEN INNOVATION takes no responsibilities for any device
failures or data losses caused by failures to follow instructions.
The product supports EPS function. When you connect the grid power to the AC
Input Port of the product through an AC cable, you can power electrical
devices through the AC Output Port (AC power will come from the grid and not
the power station in this situation). In case of a sudden blackout, the
product can automatically switch to the battery powered supply mode within
30ms.
4.11 Reset Your Power Station
AC recharging failure
When AC recharging is unavailable, check to see if the overload protection
switch is switched on. If so, press it down to reset, and then recharging can
resume.
AC charging failure
If AC charging is unavailable, it’s possible that the connected devices exceed
1000W. Try unplugging one or more of the connected devices to see if this
resolves the issue.
Resetting your Power Station
If your Power Station isn’t working correctly, press the reset button (located
on the left of the product) for 3 second for a factory reset. If the Power
Station still doesn’t work, please contact SOSEN INNOVATION after service.
4.12 Estimated Usage Time**
Wh × η × DOD÷ (load W) = Charging Time (unit:hour)
Η = 90% (conversion efficiency )
DOD=80%-90% (determined by ambient temperature and discharge rate)
Load W = Your device power
Off- Grid Life
Home Backup
FAQ (Frequently Asked Questions）
1. What kinds of devices can be powered by this product?
Such as Mobile Phones, Computers, Refrigerators, Rice cookers, Electric kettles, Lights and most household appliances and outdoor electricity.
2. What's the max power output of the AC output ports?
1000W. You are advised to check the power of the appliances before use and ensure that the sum of the power of all loaded devices is less than the rated power.
3. Can this product be charged and discharged at the same time?
YES.The product supports simultaneous charging and discharging. When you plug the power supply of this product into the wall socket, the electronic device will be directly powered by the grid, not by the product battery. In the event of a power failure, the product will automatically switch to battery power within 30ms.
4. How to estimate the running time of the equipment?
The charging time is shown on the product's LCD Screen.(Estimate the charging time) Wh × η × DOD÷ (load W) = Charging Time(unit:hours) For example, portable power station PE-1000 battery capacity is 1008Wh. 1008Wh × 90% × 90% ÷100W≈ 8.1 hours (conversion efficiency =90%, DOD=80%-90%(determined by ambient temperature and discharge rate), (Note: These are estimates and may vary by environment, usage, and firmware version)
5. What does ECO mode mean？
In ECO mode (the default setting), if the AC output is less than 10W or the DC output is less than 1W, lasting for 4 hours. The AC output or DC output is automatically turned off to save power consumption. We hope this design can benefit to our users.
6. Can I carry this product on the plane?
NO.
7. Can this product be connected to a home circuit breaker box?
NO.
Storage and Maintenance
- Please use or store the product in an environment temperature between 68°F to 86°F (20°to 30°C) , away from water, heat, and other metal objects.
- For long-term storage, please discharge the battery to 30% and recharge it to 80% every three months.
- For safety, please do not store the product in an environment temperature higher than 113°(45°C) or lower than 14°F (-10°C) for a long time.
- If the remaining battery is less than 10% after you finish using the product, please recharge it to 60% before storing. If the product is left idle for a long time with severely low battery, irreversible damages may be caused to the battery cell and the product service life will be shortened.
- If the product has been idle for too long and the battery is severely low, it will enter a deep sleep protection mode. In such case, please charge the product before using it again. 6. If dirt in the interface of the product, please clean the product with a dry, soft and clean wiper or paper towel. Do not use gasoline, volatile oil, thinner, kerosene and other resins with dissolving function.
- Do not stack anything on top of the unit either in storage or in use.
- Avoid exposing the unit to rainy or wet environment and in direct sunlight.
Troubleshooting
| Icon indicator | Problem | Solution |
|---|---|---|
| Overload | AC Output | |
| Overload Protection | Normal operation will resume automatically once you |
remove the overloaded device and restart the product. Electrical appliances should be used within rated power.
HOT| AC High
Temperature Protection| The power supply can be resumed automatically after
the battery cools down.
COLD| AC Low
Temperature Protection| The power supply can be resumed automatically after
the battery temperature rises above 10F(-12’C).
FCC Warning
This device complies with Part 15 of the FCC Rules.Operation on the product is subject to the following conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses, and
can radiate radio frequency energy, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur
in a
particular installation.
Attention: If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm(0.65ft) between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>