CARANDDRIVER FMX500 FM Transmitter Phone Mount User Manual

CARANDDRIVER FMX500 FM Transmitter Phone Mount

Product Information

Important Safety Instructions

Box Contents

• CAD-FMX500
• Vent Mount
• USB Car power adapter
• AUX Cable
• Dash Mount
• Charging Cable
• User Manual

Overview

1. Adjustable gripper (side)
2. TF card slot
3. FM wheel
4. Multifunctional button (Play/Pause; Hang up/Answer; Siri/Google Voice Assistant)
5. Mic
6. Type-C 5V charging port
7. Gripper release button
8. Adjustable gripper (side)
9. USB port
10. BASS button
11. Mode switch button (BT, TF, USB)
12. LED display
13. AUX OUT jack

Mounting

Method 1: Vent mounting

1. Clip button Clip
2. Mounting nut
3. Ball knob Clamp

Method 2: Dash mounting

1. Turn the mounting nut counterclockwise to loosen the clamp.
2. Insert the dash mount with a suction cup into the clamp on the phone mount, and turn the nut clockwise to tighten the ball knob.
3. Remove the protective film from the adhesive suction cup on the bottom of the mount. Then press the suction cup onto your dashboard and push the lock down to secure it in place. Adjust the CAD-FMX500’s angle and height so that it does not block your view of the road, and tighten the knob to secure it in place.
4. Press the Release button on the upper right of the phone mount to unlock the adjustable gripper (side).
5. Place your phone onto the charging pad, and adjust the two adjustable grippers (both sides) to lock your phone in place.

Powering on

To power on this device, connect one end of the supplied USB – Type C cable to the CAD-FMX500’s Type C port, and the other end to the supplied car power adapter. Plug the Car power adapter into your car’s DC power outlet. Once turned on, the word HI will appear on the LED display. Then after 2 seconds, the word bt will flash on the display of this device for pairing.
To your car’s DC power outlet

Bluetooth Mode

Note : This device has auto power-off memory function, which means it will remain the same FM frequency the next time it turns on, so you do not need to match the frequency again unless you change it on either your car’s radio or this device during previous use.

For Phone Call mode

• If someone calls you while you’re playing music, this device will automatically switch to telephone mode.
• Answer/End a call: Press the Play/Pause button once
• Reject a call: Press and hold the Play/Pause button for two seconds
• Redial a call: Press the Play/Pause button twice

For Aux mode

• When you use the aux cable, you can play the music from your phone without matching the device’s FM frequency the same as the car’s.
• Plug one end of the aux cable into the AUX OUT port of your phone mount, and the other end into the car’s radio aux port.
• Then press the Mode Switch button until the LED display shows the word AUH to indicate the aux status. You are now ready to enjoy your music.

For U-disc/TF Player mode

• Insert your TF card/U-disc into the TF slot/U-disk port of the device, and then press the Mode Switch button until it switches to the correct mode.
• For a TF card, the word SD will appear on the display, and you will hear an SD Card Mode sound notification.
• For a U-disc, the LED indicator will display the word USB, and a USB Mode sound prompt can be heard.
• The music you save on your TF card/U-disc will begin playing automatically.

Important Safety Instructions

Read these instructions, keep these instructions, heed all warnings, and follow all instructions.

1. Ensure that the CAD-FMX500 is mounted in a place that does not block your view of the road.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
6. Protect the power cord from being walked on or pinched, and ensure that the power cord does not get tangled with the gas or break peddles.
7. Only use attachments/accessories specified by the manufacturer.
8. Unplug this apparatus during lightning storms or when unused for long periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC NOTICE TO USERS

FCC ID: 2AMSOSTW001
Caution: Changes or modifications not expressly approved by the Party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection Against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, however there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o ffand on, the user is encouraged to try to correct the interference by one or more of the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for Help.

The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer-ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Box Contents

Overview

1. Adjustable gripper (side)
2. TF card slot
3. FM wheel
4. Multifunctional button (Play/Pause; Hang up/Answer; Siri/Google Voice Assistant)
5. Mic
6. Type-C 5V charging port
7. Gripper release button
8. Adjustable gripper (side)
9. USB port
10. BASS button
11. Mode switch button (BT, TF, USB)
12. LED display
13. AUX OUT jack

Mounting

You can mount your CAD-FMX500 with either of these methods:

Method 1: Vent mounting

1. Turn the mounting nut counter clockwise to loosen the clamp.
2. Insert the ball knob with clip and clip button into the clamp on the charger base, and turn the nut clockwise to tighten the ball knob.
3. Press the Clip button to open the clip to fix on the air vent window of your car. You can turn the ball knob to adjust your desired angel for the phone mount.
4. Press the Release button on the upper right of the phone mount to unlock the adjustable gripper (side).
5. Place your phone onto the charging pad, and adjust the two adjustable grippers (both sides) to lock your phone in place.

Method 2: Dash mounting

1. Turn the mounting nut counter clockwise to loosen the clamp.
2. Insert the dash mount with suction cup into the clamp on the phone mount, and turn the nut clockwise to tighten the ball knob.
3. Remove the protective film from the adhesive suction cup on the bottom of the mount. Then press the suction cup onto your dashboard and push the lock down to secure it in place. Adjust the CAD-FMX500’s angle and height so that it does not block your view of the road, and tighten the knob to secure it in place.
4. Press the Release button on the upper right of the phone mount to unlock the adjustable gripper (side).
5. Place your phone onto the charging pad, and adjust the two adjustable grippers (both sides) to lock your phone in place.

Powering on

To power on this device, connect one end of the supplied USB – Type C cable to the CAD-FMX500’s Type C port, and the other end to the supplied car power adapter. Plug the Car power adapter into your car’s DC power outlet. Once turned on, the word “HI” will appear on the LED display. Then after 2 seconds, the word “bt” will flash on the display of this device for pairing.
To your car’s DC power outlet

Bluetooth Mode

To play the music from your phone, you need to pair your phone with the device. When pairing for the first time, follow the steps below:

1. Make sure the device is powered on.
2. Open your phone’s Bluetooth settings.
3. Search “CAD-FMX500” from your bluetooth list, and tap it to connect.
4. Three seconds after connected, the display will return to FM status.
5. Turn on the car’s radio, and choose an unoccupied radio station. Then push the FM wheel on the device for one second until the LED display flashes the frequency.
6. Turn the button up/down to match the same frequency. Once done, you can play the music from your phone. Use the “play/pause button to play or pause the music.

Note : This device has auto power-off memory function, which means it will remain the same FM frequency the next time it turns on, so you do not need to match the frequency again unless you change it on either your car’s radio or this device during previous use.

For Phone Call mode

If someone calls you while you’re playing music, this device will automati- cally switch to telephone mode.

For Aux mode

When you use the aux cable, you can play the music from your phone without matching the device’s FM frequency the same as the car’s.
Plug one end of the aux cable into the AUX OUT port of your phone mount, and the other end into the car’s radio aux port. Then press the “Mode Switch” button until the LED display will show the word “AUH” to indicate the aux status. You are now ready to enjoy your music.

For U-disc/TF Player mode

Insert your TF card/U-disc into the TF slot/U-disk port of the device, and then press the “Mode Switch” button until it switches to the correct mode (For a TF card, the word “sd” will appear on the display, and you will hear a “SD Card Mode” sound notification; for a U-disc, the LED indicator will display the word “usb”, and a “USB Mode” sound prompt can be heard). The music you save on your TF card/U-disc will begin playing automatically.

Bass Function
Press the “Bass” button to switch between normal and bass mode (On the LED display, H0 means normal mode, H1 means bass mode).

Activate Siri/Google Voice Assistant
Press and hold the “Play/Pause” button for 2 seconds to activate Siri/Google Voice Assistant.

Specifications

Notice

This symbol means the product must not be discarded as house-hold waste, and should be delivered to an appropriate collection facility for recycling.
Follow local rules and never dispose of the product with normal household waste. Correct disposal of old product helps prevent negative consequences for the environment and human health.

Disclaimer

All information, design and specifications contained in this manual were cor- rect at the time of this publication. As the product goes under continuous up- grades and changes, however, the final device may have slight differences. The contents of this manual are subject to change without prior notice, and CAR AND DRIVER will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.
CAR AND DRIVER IS A REGISTERED TRADEMARK OF HEARST COMMUNI-CATION, INC. AND USED UNDER LICENSE BY SUMMIT ELECTRONICS, LLC. ©2021 HEARST COMMUNICATION, INC. ALL RIGHTS RESERVED AND ANY USE OF SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPEC- TIVE OWNERS.
WARNING: CANCER AND REPRODUCTIVE HARM – WWW. P65WARN-INGS.CA.GOV.

Warranty

SUMMIT ELECTRONICS LLC One Year Limited Warranty

SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) – For Prod-uct Categories Listed in Chart Below (as applicable, “Product”) Before return-ing your Product for service under this Warranty, please (i) read the instruction manual carefully. If you are still having trouble with your Product, please con-tact Technical Support at support@caranddrivertech.com

Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC warrants to the original purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”). Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, SUMMIT ELECTRONICS LLC will, as its option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair the Product (or, as appli-cable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer for Parts and/or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited warranty contained herein.

This Warranty specifically excludes any Product (or, as applicable, any compo- nent thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the Product, any other Customer-induced damage, or the alteration or removal of any Product serial number; (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than SUMMIT ELECTRONICS LLC or a party authorized in writing by SUMMIT ELEC-TRONICS LLC; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as appli-cable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commer-cial use only. Product is not warranted for Customer’s commercial or rental use. In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. SUMMIT ELECTRONICS LLC disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product, and agrees to indemnify SUMMIT ELECTRONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such uses.

EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT FITNESS FOR A PAR-TICULAR PURPOSE, LIMITATION ANY IMPLIED WARRANTY (I) OF MER-CHANTABILITY, (II) OF OR (III) OF NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICA BLE LAW, IN NO EVENT WILL SUMMIT ELECTRONICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSE-QUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSO-EVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY.

This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indi-cates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC Electronics Corporation to cover return ship-ping charges to US destinations only, for the applicable dollar amount shown for the Product in the table above. SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer. Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

Call Us Llámanos: 833-227-3274
Message to Us Mensaje para nosotros:
https://caranddriverdashcams.com
Email Us | Envíanos un correo electrónico
support@caranddrivertech.com

References

• P65WARNINGS.CA.GOV
• Automotive technology and accessories for vehicles – caranddrivertech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>