NEWDERY External Battery Case for iPhone Series User Manual
- June 3, 2024
- NEWDERY
Table of Contents
External Battery Case for iPhone Series
User Manual
Product Diagram
Battery charging
directions
- By connecting the battery and the power supply with a USB cable.
- Put the battery case on the wireless charger, if not working, please check whether the position is right in the receiving area. The white LED lights show the current electricity, if 4 led lights are on, it means fully charged.
Phone charging directions
- Connect the phone with the battery case, and long press the switch for 3s to turn it on/off.
- While charging the phone and battery at some time, the phone will have priority.
Caution
| with the sticker label supporting the wireless receiving function.
---|---
| Only the audio model is compatible with the original lightning headset and
charging simultaneously.
Installation Instruction
First, bend the top soft TPU backward, then gently slide the phone onto the
case until the connector perfectly fit the phone, and cover the top to finish
installation.
Disassembly Instruction
First, bend the soft TPU bockwards0then push the phone horizontally upwards to
finish the disassembly.
Attention: The middle side of this
product is both hard plastic, please assemble/disassemble your phone
horizontally.
LED Indicator
Product Specifications
Package Contents
External 8attery CaseXl ————— User Manual Xl
Warning
- Make sure this product is fully charged prior to use.
- Do not place metal or other foreign objects on the wireless charging area.
- Keep out of reach of children.
- Avoid severe fall cases, extrusion, etc, and stop using it immediately if meet any unusual phenomenon.
- Always keep the product dry and clean.
- Do not use the product in high temperatures, Heat dissipation, or short-circuit environments.
- Use the original Cobie and charger for your device when charging it for this product.
- Do not disassemble or replace any accessories.
- It is a normal phenomenon of getting warm during the charging process.
- The battery should be charged at least every three months to avoid shortening the battery life.
Wireless receiving battery case manual
Installation/Removal
Bend the upper soft TPU part, slide the iPhone from the top TPU part to the
bottom, and slide the iPhone out vertically.
Warning !!!
Do not remove the phone by force, it will damage the
charging port.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>