IPS Controllers IPS-M710 M710 Automated pH Controller Owner’s Manual
- June 12, 2024
- IPS Controllers
Table of Contents
M710 Automated pH Controller
Owner’s Manual
IPS-M710 M710 Automated pH Controller
Application: Perfect Match for Commercial Water
Features; also Ideal for Salt-Treated Pools
Maintain consistent pH and sanitizer levels through out the day, assuring the
chemicals are balanced and the water is clean and clear.
Automatically monitor, adjust and dispense the correct amount of chemicals
based on user demand.
For pools operating with salt chlorine generators which can create a high pH
environment, the M710 is an ideal complement to keep the pH levels in line.
Quick and simple to operate, easy installation right out of the box and system
set up takes just minutes. It’s rare, but if technical support is needed, we
are just a phone call away.
Specifications
- pH set level 7.0- 8.0
- Default high/low alert settings
- Readout – LED with digital display
- Alarm – LED alert display
- Push button high/low alert adjustment
- Dose Rate – timed or continuous
- Electrical Input/Output 110/230 VAC
- System pre-mounted on 16”x12” hanging board
- Compatible with all sanitizing methods
- Can be used with Muriatic Acid or CO2
- Accessories available
- NSF Certified for the highest level of code compliance
- 5-year limited warranty; Made in the USA
Need a custom product or more information? Email or
Call 877-693-6903.
IPS-M710 Data Sheet Revised 10/21
www.ipscontrollers.com Phone:
877-693-6903
Email: info@ipscontrollers.com Fax:
951-693-3224
30826 Wealth Street, Murrieta, CA 92563
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>