forest frolic PE59 Scout 3 Station Timber Swing Set User Guide
- June 12, 2024
- Forest Frolic
Table of Contents
- forest frolic PE59 Scout 3 Station Timber Swing Set
- Product Information
- GENERAL SAFETY INSTRUCTIONS
- SAFETY INSTRUCTIONS
- Components
- Fixings
- Installation
- Glider Parts List
- Glider Assembly Instructions
- USING THE EQUIPMENT
- MAINTENANCE
- WARRANTY
- WOOD ADVICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
forest frolic PE59 Scout 3 Station Timber Swing Set
Product Information
General Safety Instructions
- Purpose: This product is intended for outdoor, domestic use only. It is not suitable for commercial or medical use.
- Weight Limit: 50kg per swing, 50kg per glider seat
Danger for Children
WARNING!
No eating while using the product. This product may only be used with adult
supervision. The packaging material is not suitable for children due to
choking and suffocation hazards.
Risk of Injuries
- Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a qualified technician.
- Check the product before each use. Defective parts must be changed immediately as they can impair the function and the safety of the product.
- No more than one person per swing or per attachment.
- Use the product only on even and non-slipping surfaces. Never use it near water and keep sufficient space around for safety.
Product Damage
Protect the product against splashes, humidity, high temperature, and direct
sunlight.
Assembly Advice
- The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, ask a technically qualified person.
- Before you start with the assembly, read the instructions carefully.
- Remove all packaging materials and lay down all parts on an open space. This gives you an overview and simplifies the assembly procedure.
- Check with the parts list that all parts are available. Dispose of the packaging material when the assembly is completed.
- Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble the product with care.
- Create a danger-free environment; for example, do not let tools lay around the workspace. Store the packaging material in a way that cannot cause any danger.
- After installing the product according to the instruction manual, ensure all screws, bolts, and nuts are correctly installed and tightened and that all joints are secure.
- Reasonable space must be kept between the product and possible sources of danger, such as other equipment, swimming pools, and fences.
- The product must be assembled correctly before use.
- Place the product on a level surface at least 2m from any structure or obstruction such as a fence, garage, or house.
- No modifications are to be made to the original product.
- The product must always be used in a well-lit area.
- Do not place anything under the product.
- Use gloves during assembly and disassembly.
- Outdoor products should be equipped with a device that, in strong wind conditions, avoids displacement due to wind (e.g., steel bars in the ground or loads like sandbag or water bags).
- In certain areas during winter, snow buildup and low temperatures can damage the product. It is recommended to remove snow buildup and to store the product indoors.
- We strongly recommend visual inspections every 3 months to ensure the integrity of the entire product. Replace any parts as necessary.
Safety Instructions
- The safety instructions of the product should always be considered and obeyed.
- Using the product may result in permanent injury such as paralysis or even death. Falling off the swing set can cause severe harm.
Warning:
- Not suitable for children under 36 months due to small parts, cords, and the design of the product.
- For children ages 3-12 years and must be used under adult supervision.
- SUFFOCATION HAZARD: be careful of small detachable parts that may be swallowed.
- Keep the packaging away from children and dispose of all packaging before use.
- This owner’s manual contains safety, assembly, use and maintenance instructions. Retain for future reference.
- The product must be assembled by an adult who has read and understood these instructions.
GENERAL SAFETY INSTRUCTIONS
PURPOSE
This product is intended for outdoor, domestic use only. It is not suitable
for commercial or medical use.
- Weight Limit: 50kg per swing, 50kg per glider seat
DANGER FOR CHILDREN
- WARNING! No eating while using the product
- This product may only be always used with adult supervision.
- The packaging material is not suitable for children due to choking and suffocation hazards.
RISK OF INJURIES
- Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a qualified technician.
- Check the product before each use. Defective parts must be changed immediately as they can impair the function and the safety of the product.
- No more than one person per swing or per attachment.
- Use the product only on even and non-slipping surfaces. Never use it near water and keep sufficient space around for safety.
PRODUCT DAMAGE
- Do not make alterations to the product. Only use original spare parts. Qualified technicians should only carry out repairs – improper repairs can lead to danger for the user. Use this product only as described in this manual.
- Protect the product against splashes, humidity, high temperature and direct sunlight.
ASSEMBLY ADVICE
- The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, ask a technically qualified person.
- Before you start with the assembly, read the instructions carefully.
- Remove all packaging materials and lay down all parts on an open space. This gives you an overview and simplifies the assembly procedure.
- Check with the parts list that all parts are available. Dispose of the packaging material when the assembly is completed.
- Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble the product with care.
- Create a danger free environment; for example, do not let tools lay around the workspace. Store the packaging material in a way that cannot cause any danger.
- After installing the product according to the instruction manual, ensure all screws, bolts and nuts are correctly installed and tightened and that all joints are secure.
- Reasonable space must be kept between the product and possible sources of danger, such as other equipment swimming pools and fences.
- The product must be assembled correctly before use.
- Place the product on a level surface at least 2 m from any structure or obstruction such as a fence, garage or house.
- No modifications are to be made to the original product.
- The product must always be used in a well-lit area.
- Do not place anything under the product.
- Use gloves during assembly and disassembly.
- Outdoor products should be equipped with a device that in strong wind conditions avoid displacement due to wind (e.g. steel bars in the ground or loads like sand bag or water bags).
- In certain areas during winter, snow buildup and the low temperatures can damage the product. It is recommended to remove snow buildup and to store the product indoor.
- We strongly recommend visual inspections every 3 months to ensure the integrity of the entire product. Replace any parts as necessary.
SAFETY INSTRUCTIONS
- The safety instructions of the product should always be considered and obeyed.
- Using the product may result in permanent injury such as paralysis, or even death. Falling off the product may lead to injuries, particularly to the back, neck, or head.
- No clothes with hooks or lose parts should be worn or carried during product usage in order to avoid hooks getting caught and causing injury.
- Moving the product whilst assembled may affect the integrity of the frame. Should it be necessary to move the product, please consider the following:
- Force to be evenly spaced around the frame to lift the product off the ground
- The product must be carried horizontally
- Use caution whilst moving as it could bend the product frame.
- Users should be familiar with the assembly manual. This manual contains assembly guidance; selected precautionary measures as well as recommendations for servicing and maintenance of the product, in order to ensure safe and fun usage.
- It is the responsibility of the owner or the supervisor to guarantee that all users of the product are informed sufficiently of all warning references and safety instructions.
For the supervisor:
The supervisor’s role is to make sure users are aware of all safety
precautions and that these precautions are enforced. When a supervisor is not
available, the product may be disassembled or covered to limit access.
- The product can be only used if it is in good condition, worn or damaged parts should be replaced.
- Objects, which could be dangerous to the user, should be away from the product
- Avoid unauthorized and unsupervised use of the product.
- Do not use the product under influence of alcohol or drugs (incl. medicines).
- Do not use the product or its attachments as a jumping platform.
Components
Fixings
Installation
STEP 1
- You must copy with connector and ring position indications.
- Ensure that connectors are correctly aligned.
Attention
- To ensure the swing frame’s geometry is correct, please comply carefully with the depth indications when placing the wooden posts in the connector.
- It is best to place the swing frame and assemble it on the ground.
- You will be required to raise the product during the next step
STEP 4 (optional anchoring guide)
Note:
The swing can be anchored directly into the ground using the anchors provided.
You may also use cement for additional stability, please follow the below
instructions. *Image below for reference only.
Safety Perimeter Diagram
Attention
Recommended Safety Perimeter:
The safe play area refers to the zone extending 2m beyond the equipment on all
sides and 700cm above the equipment. The safe area must be free from all
structures, landscaping, trees and branches, rocks, wires, sprinkler heads and
other similar obstacles which could obstruct safe play. Children can be
seriously injured running or colliding with such obstacles.
Glider Parts List
Glider Assembly Instructions
Warning:
- This product is to be used domestically in an outdoor family environment.
- This equipment may not be used for collective and/or public purposes (playgrounds, campgrounds, schools, nursery schools, etc.)
- This item is designed for children ages 3 to 12 and must be used under adult supervision.
WOOD ADVICE
Our products are manufactured from premium timber. Great care is taken in
selecting, machining, and treating the timber before it is sold to you.
Bear in mind that timber is a natural product and may experience changes throughout the course of its life. It may:
- Develop openings (gaps, slits, apertures, cracks) along the line of the grain. This occurs due to the moisture content between the internal and outer surfaces of the timber. It is totally acceptable and will not affect the integral strength, life or guarantee of the product.
- Fade as the timber reacts with sunlight. The timber should be treated with a proprietary product to act as a protective barrier (i.e. a water repellent, oil or paint on an annual basis)
ASSEMBLY
Assembly must be performed by two adults. During assembly, the short pieces of
wood forming the base of the frame must be embedded 10 or 12 cm (depending on
the connectors) before being attached to the coach screws.
ANCHORING
- Anchoring is optional but is recommended for additional stability
- Anchor kits are provided, but cement is not supplied.
- A minimum 5 cm depth below ground level of concrete anchoring is needed.
RECOMMENDATIONS:
- The swing frame must be securely attached.
- For safety reasons, the cement cubes must be poured 5cm below ground level, at the frame’s outer angles.
- The swing frame must not be installed directly on cement, asphalt, or any other hard surface.
- Your swing frame must be attached on a flat horizontal surface with a minimum of 2m between it and any structure or obstacle such as a fence, garage house, tree branches, cloth lines, or electric cables.
USING THE EQUIPMENT
Each swing is limited to 50kg max weight and must be used by one child at a
time.
For swing frames equipped with a slide, avoid direct sun exposure in order to
prevent risks of burns and ensure that the landing area is clear. To slide
down the slide, children must be sitting with their feet forward. During
assembly and use, ensure that any splinters are removed.
MAINTENANCE
We recommend regular maintenance should be conducted at the beginning of each season for your play equipment to ensure all main parts/fixings are tightly secured, well-oiled, and intact to avoid injury or hazards.
Check the accessories monthly as well as the play equipment’s structure in order to prevent falling risks. Check and retighten screws, blots, and all other hardware elements as necessary, and lubricate all moving metallic parts. For longer accessory life, we suggest storing them during the winter. When signs of oxidation and/or rust appear on various metallic parts of your equipment, fix, or replace them with the appropriate part. If your play structure is disassembled, be sure to clearly mark the attached metal plates to prevent accidents. Check all bolt covers and sharp edges and replace them if necessary.
WARRANTY
NEW ZEALAND CONSUMER LAW
- Many of our products come with a guarantee or warranty from the manufacturer.
- Please visit our website to view our full warranty terms and conditions: https://forestandfrolic.co.nz/pages/warranty-repairs
- In addition, we are committed to meeting our obligations under the New Zealand Consumer Guarantees Act. You are entitled to seek a repair, replacement, or refund if the goods are faulty, or the service is sub-standard. Full details of your consumer rights may be found at https://www.consumerprotection.govt.nz.
- Please send all warranty and support questions to the following email address: hello@forestandfrolic.co.nz.
WOOD ADVICE
Our products are manufactured from premium timber. Great care is taken in selecting, machining, and treating the timber before it is sold to you.
- Inspect wood parts monthly. The grain of the wood sometimes will lift in dry periods causing splinters to appear. Light sanding may be necessary to maintain a safe environment. Treating your Product with protection (sealant) after sanding will help prevent severe checking/splitting and other weather damage.
- We have applied a waterborne translucent stain to your unit. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any “rough” spots on your set. Please note this is a requirement of your warranty.
Bear in mind that timber is a natural product and may experience changes throughout the course of its life. It may:
- Develop openings/checks (gaps, slits, apertures, cracks) along the line of the grain.
- Fade as the timber reacts with sunlight.
All woods are hygroscopic, that is, it will absorb or discharge moisture to attain equilibrium with the surrounding atmosphere. Timber openings/checks occur due to the moisture content between the internal and outer surfaces of the timber. No two pieces of wood are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate change. When any wood products are exposed to the elements, it develops ‘wood checks’. A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check does not affect the strength or durability of the wood or the structural integrity of the play set.
When should wood cracks be a concern?
Most of the wood splits will never become large enough to affect the
reliability and strength of our products, however, there can be rare cases
where splits can occur. This happens when a crack develops past the halfway
point from the timber, splitting it into two separate pieces.
Feel free to contact us with detailed pictures of your product so we can assess and ensure that your playground remains safe.
- Dimensional timbers contain very little heartwood so fewer splits can be seen.
- Round pole swing sets are very thick so that cracks (shown left) will not affect the strength and durability of our swing sets.
For more information: https://forestandfrolic.co.nz/pages/natural- timber.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>