better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror User Manual

June 4, 2024
Better Bathrooms

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig1

This product is suitable for installation in Zone 2 or higher, unless filled with a shaver socket as this must be located outside of Zones 0,1 and 2.

DIMENSION

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig2

Included

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig3

INSTALLATION INSTRUCTION

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig4
better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig5
better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig6

Operation

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig7

PRODUCT DIMENSION

better bathrooms LEDGAL010 ø800 Round Backlit Colour Change LED Mirror-
fig8

PRODUCT SPECIFICATION

  • Product Wattage: 30W
  • Product Wattage: IP44
  • Input Voltage: 240V
  • Colour temperature: 3000K ~ 6400K

WARNING:
Read these instructions carefully before proceeding. Keep these instructions in a safe place for future reference.

IMPORTANT:
We recommend that you consult a qualied electrician. All electrical Installation must be carried out in accordance with current IEE wiring regulations (BS7671).

SAFETY WARNINGS:

  • These products must not be modied in any way or installed in any other way than dictated in these instructions.
  • Any modications may render the product unsafe and will void the products warranty.
  • This product is for indoor use only.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)

The symbol on the product and/or accompanying document, the crossed out wheelie bin, indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.

MAINTENANCE

  • Ensure that the power is disconnected prior to cleaning.
  • Wipe over with a cloth periodically.
  • Do not use harsh chemical solvents, this may dis-colour or damage the nish.

NOTE

  • Please ensure you use an appropriate driver with an adequate max wattage.
  • Do not overload the LED Driver.
  • The Demister Pad is located in the centre of the mirror. The de-mist function may take several minutes to propagate to the outer edges of the mirror glass.
    This product contains a light source of energy efficiency class G.

UK Address: Sensio Ltd, Unit 7, Speedwell Road, Castleford, West Yorks, WF10 5PY
EU Representative: Sensio d.o.o, Cesta VI/5, 3320, Velenje, Slovenia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Better Bathrooms User Manuals

Related Manuals