Quill Productions Fox Trap Fold Flat Instructions
- June 12, 2024
- Quill Productions
Table of Contents
FOX TRAP
SETTING INSTRUCTIONS
Parts list:
1 x Fold Flat Fox Trap
15 x cable ties
2 x securing rods for front door
1 x long mechanism / trigger rod
Assemble on a flat surface
-
Pull one side up to open and form the trap.
-
Pull up the rear door / back plate and clip into side hooks. Close and secure the bait door. (This will help the trap hold its shape)
-
At the front of the trap firstly lift the mesh frame up from the inside. Line this up with the eyelets at the top (about 7 squares back from the front of trap)
-
Take 1 x securing rod and push through the 4 lined up eyelets.
-
Take the other securing rod and secure the front and base by pushing it through the 4 eyelets.
-
Attach the trigger rod making sure it is threaded through the loop on the top of the trap.
Attach the bar to the hook using the split pin. -
Place a lure on the hook
-
To set the trap lift the door up and place the long trigger rod through the weldmesh strip. (SEE PICTURE)
@quillproductions 01258 818239 quillproductions.co.uk