Tenda B08JJZ12RT Wireless Dual Band USB Adapter Installation Guide

June 12, 2024
Tenda

Tenda logo Quick Installation Guide
Wireless Dual Band USB Adapter
U18/U18a

Package contents

  • Wireess USB adapterx 1
  • Quick nstlaton guide x 1

For some models, a USB extension cable i provided. Please refer othe package of the actual product you purchased.

Install the wireless USB adapter

(Windows 10 supported)

If a wieless adapter has alteady been nstalld on your computer before, please uninstall the existing wirless adapter driver firt.For detaied steps, see Appendix 1.

  1. Install the wireless USB adapter.
    – Connect your wireless USB adapter to a USB port on your computer.
    U18 is used as an example in the following figure.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter - wireless USB
adapter– Or,if a USB extension cable is provided, please use the USB extension cable to connect the wireless USB adapter tothe USB port of your computer. U18a s used as an example in the following figure.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter - USB extension
cable

  2. Double-click the This PC icon. ” Tips If you cannot find the This PC icon, please add the icon to your desktop first.
    For detailed steps, see Appendix 2.

  3. Double-click Tenda.Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Tenda

  4. Double-click Windows.Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Windows

  5. Double-click Setup.exe, and then install the wireless USB adapter according to the prompts.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter -
promptsWait a moment until the initialization finishes. Now you can connect to the Wi-Fi network.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Wi-Fi
network

Connect to Wi-Fi

(Windows 10 used as an example)

  1. Click in the bottom right comer of your screen, select the desired Wi-Fi network, and then click Connect.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter -
Connect

  2. If the wireless network is encrypted, enter ts wireless password, click Next, and then follow the system prompts.
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Wireless
networkConnected successfully.Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Connected
successfully

Appendix 1: Uninstall the existing wireless adapter driver on your computer
Perform the following steps (Windows 10 used as an example):

  1. Click in the bottom left comer of your screen, and then click

  2. Click Apps.Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Apps

  3. Find and uninstall any other installed wireless adapter drivers.

Appendix 2: Add the This PC icon to your desktop
Perform the following steps (Windows 10 used as an example):

  1. Right-ciick on your desktop and choose Personalize.

  2. Select Themes from the left sidebar, and then click Desktop icon settings
    Tenda B08JJZ12RT Wireless Dual Band USB Adapter -
Themes

  3. Check Computer and click OK.Tenda B08JJZ12RT Wireless Dual Band USB Adapter - Computer

Appendix 3: Service and support
For more information about the equipment (such as the installation video and brochure), please scan the QR code below.

https://ma.tenda.com.cn/procata/27.html
More information

Technical Support
Shenzhen Tenda Technology Co,, Ltd.
Floor 6-8, Tower E3, No.1001, Zhongshanyuan Road, Nanshan
District, Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Toll Free: 7x 24 hours
Canada hotline: 1-888-998-8966
Toll Free: Mon – Fri
9 am— 6 pm PST
Hong Kong hotline: 00852-81931998
Global hotline: +86 755-2765 7180 (China Time Zone)
Website: www.tendacn.com
E-mail: support@tenda.com.cn


CE Mark Warning

Thisis a Class B product. In a domestic environment, this product may cause radio interference, in which case the use may be required to take adequate measures.
Operations inthe 5.16-5.25GHz band are restricted to indoor use only.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modfications to this equipment. (2) Toavoid unnecessary radation interference, It is recommended to use a shielded RJAS cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO,, LTD. decares that the radio equipment type U18 & U18a is in compliance with Directive 2014/53/EU.
The fulltext of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-10htmi

Operating Frequency:
2.4 GHz: EU/2400-2483.5 MHz (CH1-CH13)
5 GHz: EU/5150-5250 MHz (CH36-CH48)
EIRP Power (Max):
2.4GHz <20 dBm
5GHz: < 20dBm
Software Version: 1.0.0.1

For EU/EFTA, this product can be used in the following countries:

| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR| HR| IT| CY| LV
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
LT| LU| HU| MT| NL| AT| PL| PT| RO| SI| SK| Fl| SE| UK


FCC Statement

This equipment has beentested and found to comply with the limits for a Class.
B digitaldevice, pursuant to Part 15 of the FCC Rules. These imits are designedto provide reasonable protection against harmful interferenceina residential installtion. This equipment generates, uses and can radiate racio frequency energy and, if not installed and  usediin accordance with the instructions, may cause harmil interference to radio communications.
However, there s no guarantee that interference will not occur ina particular instalation. If this equipment does cause harmful nterference toradio or television reception, which can be determined by turning the equipment off andon, the useris encouraged 1oy to  correct theiinterference by one or more of the folowing measures:

  • Reorient or relocate the receiving antennia,
  • Increase the separation between the equipment and receiver.
  • Connectthe equipmentinto an outlet on a circuit different fromthat to ‘whichthe receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

The device s forindoor usage anly.
Operationis subject o the ollowing two conditions: (1) this device may not cause hamnful interference, and (2)this device must accept any interference received, including interference that may cause undesied operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure imits set forth for an uncontrolled environment and it also complies with Part 15 ofthe FCC RF Rules.
Caution:
Any changes or modifications not expressly approved by the party responsible: for compliance couid void the user’s authority to operate this equipment.
This ransmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.

Operating frequency:
2.4.GHz: 2402-2480 MHz
5 GHz: 5150-5350 MHz, 5470-5725 MHz, 5726-5850 MHz
NOTE: (1) The manufactureris not responsible for any radio or TV interference caused by unauthorized modifications to this equipment, (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

Operating Temperature: 0°C-40°C
Operating Humidity: (10%-90%) RH, non-condensing

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the  environment User has the choice to give his product to a competent recycling ‘organization orto the retailer when he buys a new electrical or electronic equipment:

Copyright
©2021 Shenzhen Tenda Technology Co., Ltd. Allrights reserved.
Tendais a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks o their respective holders.
Specifications are subject to change without notice.

Tenda logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals