Havit Lighting HV36053T-WHT Liptor Black 30w Ceiling Mounted LED Oyster Instruction Manual
- June 12, 2024
- Havit Lighting
Table of Contents
Havit Lighting HV36053T-WHT Liptor Black 30w Ceiling Mounted LED Oyster
Product Information
The Liptor Oyster Light is a high-quality lighting fixture designed for indoor and outdoor use. It is made of durable aluminium material and is available in black and white color options. The light has an IP54 rating, making it resistant to dust and water splashes. The light operates on a 240v AC input voltage and has a built-in LED lamp. There are different models available with varying lamp wattages and color temperatures. The lamp wattages range from 10w to 30w, providing different levels of brightness. The colortemperature options include TRI Colour – 3000k, 4000k, and 5500k, allowing you to choose the desired ambiance for your space. The light output, measured in lumens, varies depending on the model. The lower wattage models produce 440lm, 480lm, and 450lm, while the higher wattage model produces 1130lm, 1360lm, and 1310lm. The light has a high color rendering index (CRI) of over 80, ensuring accurate color representation. The Liptor Oyster Light comes with a 3-year replacement warranty, providing peace of mind and assurance of its quality.
Product Usage Instructions
- Ensure that the electrical circuit is free of voltage by turning off the master switch.
- Loosen the allen screws from the side of the fitting and remove the outer ring. Set it aside.
- Loosen the screws on the front of the cover and remove the cover. Set it aside.
- Locate the switch on the front of the LED PCB and slide it to the desired color temperature.
- Reattach the cover, ensuring that the screws are tight and the seals are in place to prevent water penetration.
- Reattach the outer ring and tighten the allen screws on the side.
Note: The installation of the Liptor Oyster Light must be done by a licensed electrician for safety reasons. Please refer to the contact details below for professional assistance.
Product Specifications
Product Specifications
Model No.| HV36501T-BLK| HV36051T-WHT| HV36052T-BLK| HV36052T-WHT| HV36053T-
BLK| HV36053T-WHT
Name| Liptor
Material| Aluminium
Colour| Black| White| Black| White| Black| White
IP Rating| IP54
Input Voltage| 240v AC
Lamp Base| Built in LED
Lamp Wattage| 1x 10w| 1x 20w| 1x 30w
Colour Temp| TRI Colour – 3000k, 4000k, 5500k| TRI Colour – 3000k, 4000k,
5500k| TRI Colour – 3000k, 4000k, 5500k
Lumens| 440lm, 480lm, 450lm| 1130lm, 1360lm, 1310lm| 1320lm, 1600lm, 1490lm
CRI| > 80
Dimmable| No
Warranty| 3 Years Replacement*
Important Safety Issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminium and 304SS fittings must not be installed within 5km of any salt water environments.
- When installing copper fittings, gloves must be worn to avoid any oils transferring to fitting.
- All o-rings and seals must be in place correctly to maintain warranty
- This form may be updated at any time due to product improvements, please check online installation form for most current version.
Dimensions
- HV36051 Dimensions
- HV36052 Dimensions
- HV36053 Dimensions
- HV36051 Mounting Base
- HV36052 Mounting Base
- HV36053 Mounting BaseØ275932x
Installation
Steps for Installation:
- Make sure that the electrical circuit is free of voltage (master switch off)
- Loosen allen screws from side of fitting and remove outer ring and set aside.
- Connect the cable – use wire with earth; connect the earth first, then live and neutral wire
- Attach mounting base in desired location.
- Loosen screws on front of cover, Remove cover and set aside.
- Fitting is preset to 3000k, Locate switch on front of LED PCB and slide to desired colour temperature
- Reattach cover making sure screws are tight to and seals are still in place to avoid water penetration.
- Reattach outer ring and tighten allen screws on side.
- Apply silicon around edge of fitting to prevent any water from getting inside to electrical connections.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Steps for Installation for Changing Colour Temperature After Installation:
- Make sure that the electrical circuit is free of voltage (master switch off)
- Loosen allen screws from side of fitting and remove outer ring and set aside.
- Loosen screws on front of cover, Remove cover and set aside.
- Locate switch on front of LED PCB and slide to desired colour temperature
- Reattach cover making sure screws are tight to and seals are still in place to avoid water penetration.
- Reattach outer ring and tighten allen screws on side.
Must be installed by a licensed electrician
Contact Details:
- 143 Beauchamp Road Matraville NSW 2036 Australia
- Tel: 02 9381 8300
- Fax: 02 9666 8881
- Email: sales@havit.com.au .
- Web: www.havit.com.au.
Warranty Terms & Conditions
Additional Information
Documents / Resources
|
Havit Lighting HV36053T-WHT Liptor Black 30w Ceiling Mounted LED
Oyster
[pdf] Instruction Manual
HV36053T-BLK, HV36053T-WHT, HV36053T-WHT Liptor Black 30w Ceiling Mounted LED
Oyster, Liptor Black 30w Ceiling Mounted LED Oyster, Ceiling Mounted LED
Oyster, Mounted LED Oyster, LED Oyster
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>