HAVIT Lighting HV3288W-AB Stylez Step Light Installation Guide
- June 12, 2024
- Havit Lighting
Table of Contents
HAVIT Lighting HV3288W-AB Stylez Step Light
Product Usage Instructions
- Ensure the product is installed by a licensed electrician for safety reasons.
- Refer to the Mounting Base Diagram for installation guidance.
- Make sure to follow all safety instructions provided in the manual.
- Select the appropriate model based on the desired material and color.
- The product is suitable for outdoor use with an IP65 rating.
- The input voltage is 12v DC.
- The lamp base is built-in LED.
- The lamp wattage is 1x 3w.
- Choose the desired color temperature between 3000k and 5500k.
- The product provides a brightness of 240lm to 250lm.
- The Color Rendering Index (CRI) is greater than 80, ensuring good color representation.
- The product is not dimmable.
- A warranty of 3 years replacement is provided.*
Product Specifications
Model No.| HV3288W-AB| HV3288C-AB| HV3288W-BR| HV3288C-BR| HV3288W-GPH|
HV3288C-GPH| HV3288W-BLK| HV3288C-BLK| HV3288W-WHT| HV3288C-WHT| HV3288W-
SS316| HV3288C-SS316
---|---|---|---|---|---|---|---|---|---|---|---|---
Name| Stylez
Material| Brass| 316 Stainless Steel
Colour| Antique Brass| Brass| Graphite| Black| White| Stainless Steel
IP Rating| IP65
Input Voltage| 12v DC
Lamp Base| Built in LED
Lamp Wattage| 1x 3w
Colour Temp| 3000k| 5500k| 3000k| 5500k| 3000k| 5500k| 3000k| 5500k| 3000k|
5500k| 3000k| 5500k
Lumens – V3288| 240lm| 250lm| 240lm| 250lm| 240lm| 250lm| 240lm| 250lm| 240lm|
250lm| 240lm| 250lm
CRI| > 80
Dimmable| No
Warranty| 3 Years Replacement*
Dimensions
Mounting Base Diagram
Important Safety Issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- When installing low voltage fittings, Voltage to fitting must be within +or- 5% of voltage required and cannot be installed more than 25m from LED Driver, if not within this allowance warranty will be voided.
- When installing copper or brass fittings, gloves must be worn to avoid any oils transferring to fitting.
- All 316 stainless steel fittings must have regular cleaning maintenance to avoid any tea staining from forming on fitting. (Warranty does not cover Tea Staining)
- All o-rings and seals must be in place correctly to maintain warranty.
- These instructions may be updated at any time due to product improvements, Please visit website for most current installation instructions.
Steps for Installation
- Make sure that the electrical circuit is free of voltage (master switch off)
- Remove base plate from fitting by loosening allen screws on side of fitting.
- Install mounting bracket in desired location.
- Using an appropriate 12v DC LED Driver – DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V
- Connect the cable – If more than one fitting installed, wiring must be done in parallel.
- Strip back the cable on both fitting and cable run and twist the positive cables together. Then connect neutral cables together
- Solder all joins using solder and either a heat gun or butane gas torch.
- Cover connections using an adhesive lined heat shrink or gel cap to make connection watertight. Failure to do this will void warranty.
- Heat the heat shrink or crimp the gel cap making sure all connections are covered.
- Reattach fitting to base plate making sure allen screws are tight to avoid water penetration
- Apply silicon around edge of fitting to prevent any water from getting inside to electrical connections.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Warranty Terms & Conditions*
Additional Information
Contact Details:
143 Beauchamp Road Matraville NSW 2036 Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Email: sales@havit.com.au
Web: www.havit.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>