HYUNDAI H-SF16-F1602 Floor Stand Fan Instruction Manual

June 12, 2024
HYUNDAI

HYUNDAI H-SF16-F1602 Floor Stand Fan

DESCRIPTION

  1. Front grille
  2. Grille clips
  3. Blade cap
  4. Blades
  5. Rear grille nut
  6. Rear grille
  7. Oscillating knob
  8. Motor
  9. Motor shaft
  10. Control box
  11. Screw B
  12. Screw
  13. ertical adjustment screw
  14. Stand cover
  15. Extension pole
  16. Out-joint
  17. Stand tube
  18. Stand base
  19. Switch mode buttons
  20. Night light

INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

  • Important safeguards. read carefully and keep for future reference.
  • Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
  • Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains voltage in your home.
  • For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
  • Do not use outdoors or in damp area.
  • The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
  • Children must be under control in order not to be allowed to play with the appliance.
  • Always unplug the appliance from the power supply before cleaning and when not in use.
  • To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
  • Do not use the device in bathrooms and near water.
  • Do not place the appliance near heat sources.
  • Do not leave the appliance switched on when not in use.
  • Do not use other attachments than those supplied.
  • In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
  • Keep the cord away from sharp edges and hot surfaces.
  • Do not pull, twist, or wrap the power cord around the appliance.
  • Avoid contact with moving parts of the device. Do not put pencils or other objects through the protective grid of the fan.
  • Do not operate without fan installed protective grid.
  • Ensure that the fan is switched off from the supply mains before removing the guard.
  • Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
  • If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
  • The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
  • Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.

ASSEMBLING INSTRUCTIONS

  • The device is intended for air circulation in the room.
  • Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included into the set.
  • Do not plug in the device before its assembling is finished.
  • Tighten stand tube to stand base with screw. Fix base cover to stand base with a screw (supplied with a set).
  • Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then tighten the out-joint again.
  • Place control box firmly on top of extension pole, tighten screw B.
  • Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and put both blade cap and rear grill nut off the motor shaft.
  • Put rear grille on motor shaft.
  • Secure it with rear grille nut.
  • Slide blades on motor shaft so that claws on motor shaft match the blades slots.
  • Screw blade cap on shaft by turning counter clockwise.
  • Put front grille on rear grille and close clips or screw grille ring to secure grilles together.
  • Adjust the fan vertically by vertical adjustment screw.
  • The fan is ready for work.

OPERATION

  • CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the conditions of increased humidity.
  • Place fan only onto dry flat unyielding surface.
  • The fan can work in three speed modes:
    • “1” For minimum operational speed;
    • “2” For medium operational speed;
    • “3” For maximum operational speed;
    • “0” The fan is switched off;
    • “L” Night light mode.
  • On the upper part of the motor cover there is oscillating knob. If pressed, it makes the fan cabinet with blades traverse from side to side. To cancel oscillating mode push oscillating knob upward.
  • To switch the fan off push the button “0”

MAINTENANCE

  • Before cleaning unplug fan first.
  • Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.
  • Do not use abrasive cleansers

STORAGE

  • Keep the device in normal conditions in dry place.
  • The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
  • For additional information about actual system of the garbage collection address to the local authority.
  • Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

Licensed by Hyundai Corporation Holdings, Korea Made in China
www.hyundai-home.ru

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals