DCU TECNOLOGIC 34152040 Feedforward Active Noise Cancelling Earbuds User Manual

DCU TECNOLOGIC 34152040 Feedforward Active Noise Cancelling Earbuds

Important Safety Instructions

Please read carefully and keep all safety and usage instructions in a proper place.

1. Please read these instructions carefully.
2. Please keep this instruction manual in a proper place.
3. Please pay attention to all warnings.
4. Please follow all instructions described in this manual.
5. Do not use the product at a place where there is water or moisture.
6. Please wipe clean with a dry cloth.
7. Only use attachments/accessories specified by the manufacturer.
8. If you have any questions or concerns about maintenance or if you find any problem with the product, please contact DCU Tecnologic to manage the warranty www.dcutec.com
9. Do not spill liquids or expose the product to moisture, Do not expose or subject the product to strong shocks. Damage caused by liquids, humidity or shock is outside the guarantee.

Warnings/Cautions:

• Do not use the earbuds at a high volume for any extended period.
• To avoid hearing damage, use your earbuds at a comfortable, moderate volume level.
• Turn the volume down on your device before placing the earbuds in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
• Do not use the earbuds while driving or you are unable to hear ambient sound, so as to avoid danger.
• Focus on your safety and that of others if you use the earbuds while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in ornear traffic, a construction site or railroad and follow applicable laws regarding earbuds use, etc.
• Remove the earbuds or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
• If you feel the earbuds generate heat or can’t hear sound, please remove them immediately.
• Do not make unauthorized alterations to this product.
• Never attempt to disassemble or alter the product in any way.
• Use this product only with an USB power supply which meets local regulatory requirements (CE, TUV, etc). 2.4 maximum and don’t use quick charge.
• If the battery leaks, please do not contact with your skin or eyes. If contact occurs, please consult a doctor immediately.
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
• Wipe off sweat from the earbuds and the charging case before charging.
• IPX5 is not a permanent condition, and resistance might decrease as a result of normal wear.

Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

Care and Maintenance

• Do not drop, squeeze, bend or use excessive force to the product.
• Do not place the product in a damp, cold, extreme environment or for a prolonged period of time. Excessively high or low temperature may cause a fire /explosion of the battery. Keep away from moisture condition, in order to prevent damage of the built-in circuits.
• Do not wipe the product with volatile, irritating liquids. The best way is to clean with a soft cloth or a professional leather cleaner.
• Do not disassemble the product by yourself.
• This product contains magnetic material. Keep the product away from magnetic sensitive products (such as credit cards and video screens) to prevent damage.

Listening Safety:

Danger
To avoid harm your hearing, do not listen at high volume for a long time. Please adjust the volume to a safe range. If the earbuds volume is too high, the use time should be shortened.

After-sales Service:
This product is covered under warranty for a period of 3 years free maintenance and 30-day unconditional return policies.If you have any quality problems about the product contact DCU Tecnologic at www.dcutec.com

Product parameters

• Bluetooth Version: V5.0/5.2
• Chipset: Bluetrum 8922E Crystal-Clear calling Noise canceling: FEEDFORWARD FF
• Noise Reduction Depth: -25~-28dB
• Working Distance: 10-15m without obstacles Waterproof Rating: IPX5
• Working Time: Music 8h, talk time 8h (70% volum) Charging Time: Charging case 2h, earbuds 1h Battery Capacity: 400mAH, Single earbud 50mAH Speakers: 10mm, 32Ω, S/N: ≥100dB
• Working Current: 7mA

Packing Contents

Product introduction

Battery charge

Charge the case

1. Charge the battery with the provided USB Type C cable. The charging time is about 2h.
2. When the product is fully charged, the LED indicator become solid green LED display: charging 25%, 50%, 75%, 100%

Charge the earbuds

1. Remove the film on the earbuds when taking them out of the battery charging case for the first time.
2. Put the earbuds into the charging case and automatically charge when closing the charging case. The charging time is about 1h.
   • This product adopts the magnet contact charging

Charging case Indicators

Secure fit

1. Please check the “L” and “R”
2. Put the earbuds on your ears. Please adjust the angle according to your ears and make surethey fit in the ear securely and comfortably.

Power ON/OFF:

Power on:
Open the charging case cover and the earbuds automatically power on.

Power off:
Put the earbuds into the charging case, the earbuds will automatically power off after closing the charging case cover.

The earbuds will be power off automatically when there is no connection of the left/ right earbud for about 5 min.

Bluetooth connection

1. Open the charging case. The left and right earbud will automatically power on and pair.
2. Ready to pair (orange/green light flashes alternately). Until the left/right earbud flashes orange/green light alternately every 7 seconds, the earbuds are paired successfully.
3. Open your Bluetooth device setting and search “ANC_DCUTEC”, then click to complete the connection.
4. If the connection fails, please put the earbuds back into the charging box and repeat the above steps.

• Please tear off the insulation sticker on the earbuds contacts before using it.
• After the first connection, the earbuds will automatically connect back to the last paired device (Bluetooth device needs to be turned on).

Battery display sync:
Support iOS/Android mobile phone displays the earbuds battery level near the upper right corner of the screen.

Clear and repairing Bluetooth connection:
When the charging case is in the charging state, put the earbuds into the charging case, triple-tap the earbuds touch panel to clear Bluetooth pairing record. The earbuds LED indicator lights will flash orange and green lights on for 1s.

Noise Cancelling & Ambient Sound

Noise cancelling mode
Active noise cancellation (ANC) reduces unwanted noise providing a clearer, more lifelike audio performance. You can choose the noise cancelling mode based on your listening preferences and environment.

Ambient sound mode
Turn on ambient mode to control how much surrounding noise you let in. With quick ambient mode, you can listen in on street traffic, catch flight announcements, and hear when your kids or co-workers call out to you.

Summary: Turn on the noise cancellation function of your headphones if you want to listen to music without interruption of surrounding noise. Turn on Ambient Sound Mode if you want to hear the sounds around you

Switch between noise cancellation and ambient sound modes

1. Please make sure earbuds are power on, enable the noise cancelling function.
2. Long press earbuds touch panel for 2s, switch to ambient sound mode.
3. Long press earbuds touch panel for 2s again, enable the noise cancelling function.
4. Long press earbuds touch panel for 2s again, noise cancelling function is off.

Noise reduction mode switch
When the headset enters the TWS state, press and hold the multi-function button for 2 seconds.

• When powered on, ANC is off by default)

Note:

• Each Long press earbuds touch panel changes the function.

Touch Panel Command

• Voice assistant (Google/Siri) In the paired status, triple-tap the left earbud touch panel
• Game mode In the paired status, triple-tap the right earbuds touch panel.
• Answer the call In the incoming call status, double-tap the earbuds touch panel.
• Hang up the call In the phone call status, double-tap the earbuds touch panel.
• Reject the call In the incoming call state, long-press the earbuds touch panel 2s.
• Pause/Play music When connected, Single-tap the earbuds touch panel.
• Next song When connected, Double-tap the right earbud touch panel.
• Previous song When connected, Double-tap the left earbud touch panel.

FAQ

1. If the earbuds doesn’t function as expected, try the following steps to resolve the issue.
   • Find the symptoms of the issue in this User Guide, and try any corrective actions listed.
   • Charge the battery: You may be able to resolve some issues by charging the battery.
   • Initialize the earbuds: This operation resets the earbuds to the factory settings and deletes all pairing information.
   • Look up information on the issue on the customer support www.dcutec.com
2. Clear Bluetooth pairing record.
   • When the charging case is in the charging state, put the earbuds into the charging case, triple-tap the earbuds touch panel to clear Bluetooth pairing record. The earbuds LED indicator lights will flash orange and green lights on for 1s
3. Only one earbud worked
   • Earbuds are currently or had already been connected to a Bluetooth device, click forget or remove “ANC_DCUTEC” from your Bluetooth settings and turn off your device Bluetooth.
   • Ready to pair (orange/green light flashes alternately). Until the left/right earphone orange/green light flashes alternately every 7 seconds, the earbuds are paired successfully each other.
   • Then remove the earbuds from the charging case, active your device Bluetooth to connect the earbuds.
4. Can’t power on the Bluetooth earbuds.
   • The battery level is low, please charge the earbuds in time.
   • Put into the charging case to charge the battery.
5. Unable to make a Bluetooth connection.
   • Check that the earbuds are turned on.
   • Check that the Bluetooth device is turned on and the Bluetooth function is on.
   • Make sure the earbuds are not connected to another device.
   • Move your mobile device closer to the earbuds and away from any interference or obstructions.
   • Clear the earbuds pairing list and connect again.
6. The earbuds are connected to a Bluetooth-enabled device (mobile phone, PC, tablet, etc.), but you can’t play a song through the earbuds.
   • Refer to your device’s user manual and select to play songs through the earbuds.
   • For some music playback software, you have to go into the setup interface, and choose to play songs through the earbuds from the list of output devices (it typicallyoccurs on the PC).
7. Poor sound quality.
   • Move your mobile device closer to the earbuds (30 ft. or 10 m) and away from any interference or obstructions.
   • Make sure that both earbuds fit securely in your ear.
   • Use a different music source.
   • Try connecting another mobile device.
   • Clear any debris or wax build-up from the earbuds and earbuds nozzles.
8. Earbuds don’t charge.
   • Make sure the earbuds are properly placed in the charging case.
   • Make sure the charging case battery is not depleted.
   • Make sure there is no dirt or debris covering the charging conductors within the case or on the earbuds.
   • If your earbuds have been exposed to high or low temperatures, let the earbuds return to room temperature and then try charging again.
9. Charging case doesn’t charge.
   • Check the case battery level with charge case LED indicator light. If needed, charge the case with the supplied USB cable.
   • Secure both ends of the USB cable.
   • If your charging case has been exposed to high or low temperatures, let the case return to room temperature and then try charging again.
10. No sound.
    • Press play on your mobile device to make sure the audio track is playing.
    • Place the earbuds in the charging case to check the earbuds charging status. If needed, charge the earbuds.
    • Increase the volume on the earbuds and mobile device.
    • Make sure you are using the correct device.
    • Move your mobile device closer to the earbuds (30 ft. Or 10 m) and away from any interference or obstructions.
    • Use a different music source.
    • Connect a different mobile device.
11. Cannot hear a person on a call.
    • Check that both the earbuds and the connected device (i.e., smart-phone) are turned on.
    • Turn up the volume of the connected device if it is too low.
    • Check the audio settings of the Bluetooth device to make sure the sound comes from the earbuds during a call.
    • Re-establish the connection using the Bluetooth device.
    • While listening to music with the earbuds, stop playback and press the button on the right or left unit to respond to an incoming call.
12. Earbuds always fall off
    • Choose the ear tips that fit the size of your ear.
    • Wear the earbuds correctly.
13. The Bluetooth connection and sound signal are unstable.
    • The Bluetooth device is out of range. Please shorten the distance between the earbuds and the Bluetooth device. And keep away from any interference or obstacles.
14. Do both earbuds have call function when using single earbud?
    • Yes, our earbuds can be single-use, each one bud has the call function.
15. Can I use it on Apple products?
    • Supports iPhone, iPad, Samsung, Sony, Huawei, Xiaomi and other smart-phone devices. Supports Bluetooth audio devices.
    • If your device is with Bluetooth version above 4.0, you can use it with the earbuds.
16. What version of Bluetooth is in the earbuds? What is the maximum distance the earbuds will cover?
    • Bluetooth version is 5.0. The maximum distance must be less than or equal to 10 meters without obstacles
17. How to charge the earbuds? How many times does the charging case charge the earbuds? How long does it take to charge the earbuds?
    • Place the earbuds into the charging case and close the cover, it will start to charge the earbuds.
    • The charging case can charge the earbuds 3 times when it is fully charged.
    • It takes about 1 hour to fully charge the earbuds, depending on the actual situation
18. Can I use the earbuds when charging?
    • The earbuds must be put into the charging case when charging. So you can’t use it during charge.
19. Does it support the fast charge function?
    • Yes, earbuds use USB type-c cable, which supports fast charge. 20. What are the environmental requirements for the product?
    • Please use the product under normal environment where the temperature is between -10 °C and 40 °C.
20. How to disconnect the earbuds from a Bluetooth connected device?
    • Put the earbuds into the charging case and close the cover. The earbuds will automatically shut down.
    • If the left or right earbud isn’t connected to the device for about 5 minutes, the earbuds will automatically power off.
    • When the charging case is in the charging state, put the earbuds into the charging case, triple-tap the earbuds touch panel to clear Bluetooth pairing record. The earbuds LED indicator lights will flash orange and green lights on for 1s
    • Manually disconnect the earbuds on the Bluetooth connected device.

DCU Tecnologic’s Customer service Live web chat: www.dcutec.com/eng Email: info@dcutec.com Telephone: +34 972244105

• www.dcutec.com
• C/ Industria, 34
• 17005 Girona (España)

References

• DCU Tecnologic
• DCU Tecnologic
• DCU ADVANCE TECNOLOGIC S.L

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>