HYUNDAI H-VCRS03 Robot Vacuum Cleaner Instruction Manual

H-VCRS03 Robot Vacuum Cleaner
Instruction Manual

H-VCRS03 IM022
QUICK GUIDE

H-VCRS03 Robot Vacuum Cleaner

Before the first use

1. Install side brushes
   • Install the side brush marked R in the hole marked R.
   • Install the side brush marked L in the hole marked L.

2. Turn on the device:
   • Hold button for 5 seconds

3. Plug in the charging base

4. Charge the device (It will take 12 hours to fully charge the device for the first time, 2-3 hours for the next charges) The device also has the ability to charge directly from the power adapter

5. Use the fabric for wet cleaning (See “Fabric for wet cleaning”) Your device is ready to go!
   Use the Wi-Fi application and the control panel of the device (see “Installing the application”) After cleaning

6. Empty the dust bin

7. Clean the brushes (see “cleaning of brushes”)

8. HEPA filter cleaning (see «Cleaning of HEPA filter») For information

9. Fall sensors’ location

DESCRIPTION

1. Body
2. Control button
3. Indicator light
4. Upper cover
5. Upper cover hand
6.  Adapter plug outlet
7. Anti-drop sensor
8. Front small wheel
9. Battery cabinet
10. Intake
11. Side brush holes
12. Inner dust bin
13. Filter
14. Rechargeable battery
15. Adapter and power cord
16. Side brushes 4 pcs.
17. Base
18. Dusting cloth
19. Velcro for attaching fabric

INSTRUCTION MANUAL

Dear customer!
Thank you for the good choice and purchase of robot-vacuum cleaner Hyundai H-VCRS03 . In order to use it effectively and safely, read the instruction manual before use.

Technical characteristics

IMPORTANT SAFEGUARDS

1. Read this instruction manual carefully to prevent any unit damage or injure when using.
2. When using this appliance, basic precautions should always be followed:
3. Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
4. For home use only. Do not use for industrial purposes.
5. To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse unit or cord in any liquids.
6. To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
7. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
8. This appliance may be used by children aged 8 years and over, or persons with reduced physical, sensory or mental capabilities, if they have been supervised or instructed in the safe use of the appliance and if they understand the  dangers involved. Cleaning and maintenance of the appliance must not be made by children without supervision.
9. Children should be supervised to ensure that they do not play with the appliance.
10. Never use the vacuum cleaner without filters.
11. Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
12. If the power cord is damaged, it must be replaced with a special cord obtained from the manufacturer or a service center.
13. Do not sit on top of this product or attach an object on the top of it. Beware of children or pets while the product is in operation.
14. Never use the product to clean up combustible or highly volatile liquids such as gasoline.
15. Charging adaptor is for indoors use only.
16. Do not recharge the product if the battery cord or plug is damaged.
17. Never touch the charger, plug or cable with damped hands.
18. Please take out the battery when it is not in use for a long time.
19. The battery is to be disposed of safety.
20. The device should only be used with the power supply supplied with the device.
21. The appliance must only be powered by safety extra low voltage marked on the appliance.
22. Do not pull on the power cord. Be careful not to pinch the cord with objects, as this may damage it or cause a fire.
23. Keep the power cord away from sharp edges and hot surfaces.
24. Do not use flammable substances to clean the device. Do not bring cigarettes, lighters or matches near the appliance. This could ignite the device.
25. Unplug and turn off the divide while transporting.
26.  The appliance is not suitable for cleaning long pile carpets.
27. While the product is in operation, make sure all doors leading outside are closed.
28. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on. This device must be used in the temperature range from +5 °C to +40 °C.
29. The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
30. The production date is indicated on the product and / or on the packaging, as well as in the accompanying documentation, in the XX.XXXX format, where the first two digits “XX” are the month of production, the next four digits “XXXX” are the year of production.

Proper use

• This device is designed for vacuuming up normal house dust.

BEFORE THE FIRST USE

Preparation

• Remove all objects which may get inside the appliance or cause an obstruction from the floor before work starting.
• Check no wires, cables, curtain brushes, or bags are one the way of the device.
• Remove all items that may be dropped by the appliance (e.g. vases, small table lamps, decorative items)
• The device can pass the way between two objects if the distance between them is at least 40 cm.
• The appliance may get stuck under pieces of furniture if they have a low fit. Block his way with a pot of flower (for example) to avoid it.
• Make sure the filter is in place. Using the device without a filter may cause the vacuum cleaner to malfunction.

Before first use

• Unpack the product contents and remove all transport and packaging elements
• Install the side brushes
• Set up the charging station
• Charge the device’s rechargeable battery.

Side brushes assembling (Fig. 1)

• Place the device upside down on the floor or table
• Install the side brush marked R in the hole marked R.
• Install the side brush marked L in the hole marked L.
• If the brushes are properly installed, a click should sound

Switching on the instrument (Fig.2 )

• Hold the button on the panel pressed for 5 seconds, a beep will sound, the device will turn on  and go into standby mode, while the operation indicator light will turn blue.
•  Press the button, the vacuum cleaner will start working in the standard mode.
• To pause the vacuum cleaner, press the button again.
• You can forcibly return the vacuum cleaner to the base by pressing the button

NOTE:
If the device is not used for 5 minutes, it will turn off.
Connecting the Base (Fig. 3)

• The charging contacts on the instrument and base must always be kept clean so that the battery can be charged. To do this, periodically wipe them with a dry soft cloth.
• Place the base on a clean, level floor with its back against a wall, near a power outlet. There should be no obstacles on the way of the device to the base. There should be 1.5-2 meters of free space in front of the base, without furniture  and other items. Behind the base there should be no reflective surfaces (for example, mirrors).
•  Connect the adapter to the base, insert the adapter plug into the mains, the indicator light of the base will light up.
• Make sure that the base body is not obstructed by foreign objects.

Charging from the base (Fig. 4)
Manual recharge
Place the device on the base for recharging by connecting the charging contacts of the base and the robot.
You can also press the button to have the device automatically head to the charging base
Automatic recharging

• As soon as the battery runs out, the device will automatically go to the base, where the battery will be recharged automatically. To do this, the base must be connected to the electrical network.
  When the device is fully charged, the indicator will be solid blue.

• If the instrument cannot detect the base on its own (for example, if the room is too large or there is an obstacle in its path), use the direction buttons on the mobile app to direct the instrument to the base, or place it directly on the base manually.

• Press the button on the control panel – the device will leave the base and start working in automatic mode.

Charging from adapter
Plug one end of the adapter cord into the power socket on the vacuum cleaner and the other end into a power outlet, the charging indicator light will flash blue. When the battery is fully charged, the indicator will turn solid blue.
Accumulator charging

• Fully discharge the battery every few months and recharge. (To increase its service life)
• Before switching on for the first time, or if the device has not been used for a long time, it will take approximately 12 hours to charge the battery; in the future it will take about 2-3 hours. The battery will be fully charged after 2-3 full  charge and discharge cycles. The device works without recharging up to 70 minutes.

Using a Floor Cleaning Cloth (Fig. 5)

• The vacuum cleaner kit includes a cloth that is designed for wet cleaning of the floor.
• Attach the Velcro included in the scope of delivery of the device to its base according to Figure 5
• Attach a pre-moistened floor cloth to the Velcro described above to the bottom of the appliance.
•  Follow all the steps above to turn on the instrument.

NSTALLATION OF WI-FI APPLICATION

Application setup

• Make sure your smartphone or tablet is connected to 4G, Wi-Fi Internet.
• Make sure your smartphone or tablet runs on iOS 8.0 (or higher) or Android 4.4 (or higher).
• Make sure your router’s signal is within 2.4 GHz range.
• Make sure your smartphone and robot vacuum cleaner have WLAN signal.
• Make sure robot vacuum cleaner is fully charged and base is connected to the network.
• Scan the below QR-code to download and install “Smart Life” application.

|
---|---
https://apps.apple.com/ru/app/smart-life-smart-living/id1115101477| https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=ru&gl=US

https://smartapp.tuya.com/smartlife

1. Open the app and create a new account:

2. Enter your e-mail.
   An auto message containing confirmation code will appear in your mail box. Enter this confirmation code in the app.

3. Create any password to your account.
   Your new account is your e-mail and a password you chose.

4. Select «Add device».

5. Turn on geolocation on your mobile device.

6. Select “Small household appliances” to add robot-vacuum cleaner and then select “Robot vacuum cleaner (Wi-Fi)”.

7. If geolocation function in your phone is on, the app will hook up to the nearest Wi-Fi signal.
   Enter the password to this Wi-Fi (make sure the password is correct)

8. Press and hold the button on the instrument panel for 5-6 seconds, there will be two beeps and the indicator on the instrument panel will flash quickly. On the mobile app, select EZ Mode.

9. The app will hook up to the device in not more than 2 minutes.

10. After connecting to the app a full range on functions of the device is available.

Main features of Wi-Fi application:
Power Off Button

• Press “Power Off” Button, to turn off the robot.
  Stand by

• Press the “standby», pause the robot into standby mode
  Auto Button

•  Press “Auto”, buzzer rings once, the robot will enter to auto cleaning mode.
  Edge Button

• Press “Edge», buzzer rings once, the robot will enter to edge cleaning mode to clean along the edge of the wall.
  Spot Button

• Press “Spot” button, buzzer rings once, the robot will enter to spot cleaning mode to start cleaning specific areas.
  Auto Charging Button

• Press “Auto Charging”, buzzer rings once, enter to auto recharging mode.
  Manual mode (You can choose to withdraw)

• Press manual button into human operation
  Start/Pause

• To start cleaning.

• To stop current cleaning mode.
  Direction button

• The robot will move according to selected direction (press the let/right for once, choose the direction you want robot move, then press the forward/back)
  Schedule Button
  Select the “Timer” function, then “Add Schedule”
  Select start time
  Select the day of the week on which the action will be repeated
  Select the mode of operation of the vacuum cleaner (automatic cleaning, cleaning along walls, spot
  cleaning, return to base for recharging)
  Click the “Save” button in the upper right corner.

The appearance of the mobile application, its interface, icons and the location of functions may change without prior notice to improve its performance.
WHAT TO DO IF THE APP DOES NOT DETECT THE DEVICE:

1. Make sure the device is ready to be connected to the app. Press and hold touch button on the device, a signal sound will ring, the device will pronounce “network connection” and light indicator will be flashing in white.
2. Make sure your Wi-Fi is 2.4 Hh.
3.  Make sure that password to Wi-Fi is correct

AFTER CLEANING

Cleaning and care

• ATTENTION! Any care actions can only be performed with the device turned off and disconnected from the mains!
•  If necessary, wipe the housing with a damp cloth.
• Only the dust container may be rinsed with water. The device itself, filters, must not be immersed in water or any other liquids. Before replacing the dust container, make sure that all parts of the appliance are dry.
• No parts or accessories of the vacuum cleaner are suitable for washing in a washing machine or dishwasher!
• When cleaning the instrument, do not use corrosive or abrasive products. They may damage the surface.

Cleaning the dust container (Fig.6 )

A. Open the lid of the vacuum cleaner by pulling the lid open handle.
B. Pull the dust box out of the body
C. Release the latch on the dust box cover
D. Open the lid, empty the contents into the trash can
E. Remove the HEPA filter from the dust bag.
F. Rinse the dust box with running water
G. Dry the dust box
H. Replace the HEPA filter

NOTE:

• If you use the vacuum cleaner regularly, dust and dirt may accumulate around the air intake port. To ensure maximum efficiency and uniform air intake, periodically clean this hole.
• Do not wash the container in a washing machine, dishwasher or similar.
•  Periodically clean the filter with a soft toothbrush.
•  Be sure to empty the container after every cleaning.
• Never operate the appliance without a filter installed if the filter is damaged or dirty. Otherwise, dust will enter the motor and cause damage to the device.
• Do not use the device if the container is full. When the container is full, dirty air clogs the filter of the vacuum cleaner, as a result, the engine overheats and fails.
• Do not use the device for removing construction debris (cement, whitewash, plaster, metal shavings, etc.). These particles lead to engine failure.

CLEANING BRUSHES (Fig.7 )

• The debris that has stuck to the brushes and the hair that has wound up must be removed from time to time. It is recommended to clean them after 4-5 cycles of operation.
•  Turn off the appliance. Gently clean the rotating brushes with the hard end of the cleaning brush that comes with the kit.
•  If there is a lot of hair on the brushes, use scissors to remove them.

HEPA filter cleaning (Fig. 8)
Take out the dust bin, open the filter cover, take out the filter. Shake it to clean, it is also possible to vacuum this filter with another vacuum cleaner
NOTE: It is not recommended to wash HEPA filter in order not to damage it.
Fall sensors cleaning
Unplug the device , empty the dust bin. Put the device upside down on a flat surface. Use slightly wet cloth to wipe the sensors (Fig. 9)

BATTERY REMOVAL

• The battery must be removed from the appliance before its disposal.
• When removing the battery, the appliance must be disconnected from power supply.

STORAGE

• Fulfil all the steps from parts CARE AND CLEANING.
• Store the unit in dry cool place or in the original box.

TROUBLESHOOTING

• If all solutions given above don’t work for you, please re-set the robot by switching on the power button

2.Re-place the robot on the floor
Vacuum on but can not collect dirt and hair| 1.The dust bin is full
2.The filter is not installed correctly| 1.Clean the dust bin
2.Re-install the filter correctly
The !product is moving backwards after being started| 1. t he product is on dark color floor
2.Anti-drop sensor light was covered| 1.Put the robot on light color floor.
2.Clean anti-drop sensor light.
LED indicators flash in blue after 2hrs charging| Power supply might been cut off during charging| The robot can be operated if the battery has been fully charged for 2hrs
The side brushes crooked, not good to sweep| Being used for a long time| If it becomes crooked, please, scald it in hot water to recover it to its original shape
The product cannot start| 1.Battery is not
installed properly
2.Battery low
3.The robot is under protection status| 1.To install the battery correctly
2.To have the battery fully charged(turn off the cleaner first)
3.To re-set the robot

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
The symbol on the unit, packing materials and/or documentations means the battery used in this product not be toss in the garbage with ordinary household garbage.
For additional information about actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage

****www.hyundai-home.ru
Изготовитель: «Хоум Электроникс Лимитед»
Manufactured/Distributed by Home Electronics Limited
Licensed by Hyundai Corporation Holdings, Korea
Made in China

References

• Smart Life

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>