Sengled W1G-N84F Smart LED Strip Lights User Guide
- June 12, 2024
- Sengled
Table of Contents
Sengled W1G-N84F Smart LED Strip Lights
Introduction
Sengled Smart Wi-Fi LED Light Strips offer an easy solution to enhance your entertainment time to a new level and bring you the smart home experience. They enable you to control your lights in multiple ways– On/Off, dimming, color change, color temperature change, schedule, scene setting and more through Sengled Home app, or simply though voice control using Amazon Alexa or Google Assistant.
Important Safety Information
Before installing the Sengled Smart Wi-Fi LED Light Strips, please read and follow all precautions, including:
- Turn off power before installation or removal. Discontinue use if damaged.
- Risk of electric shock. Do not attempt to disassemble light strip.
- Suitable for use in operating environment between – 4°F and 104°F (-20°C and 40°C).
- Not for use in emergency lighting.
- Indoor use only.
Wireless Specification:
- Wireless Frequency Range: 2.4GHz (2412MHz ~ 2484MHz, IEEE 802.11b/g/n)
- Operating Channels Wi-Fi: 1 – 13
- Maximum Transmitted Output Power: +18dBm
Note: No smart home hub is required to control Sengled Smart Wi-Fi LED Light Strips.
What is include in the box?
Installation Instructions
- Measure the length of mounting surface.
- Please stick the LED light strip on suitable surface (flat is preferred). DON’T use on knitted or wool fabrics, wall, rough plastic surface or frosted glass etc. Use the alcohol pad to clean the surface first and wait for surface gets dry. Notice: Alcohol Pad should only be used for cleaning the dust of surface, please don’t use it wipe the silicone of light strip.
- Peel off tape and stick the strip to the surface, and follow the recommended options of bending strip. Please press and hold strip to surface to make sure proper adhesion.
Bending Options
- If somewhere adhesive is not strong enough, use the clips to reinforce the strip.
- Peel off tape and stick the Controller to flat surface, where easy to press and control.
The following instructions are applicable to adding your Smart Wi-Fi LED Light Strips through the Sengled Home app. If you would like to use third party smart home services, such as Amazon Alexa, Google Assistant or SmartThings, or would like to find our latest list of supported third-party integrations, please refer to support.sengled.com Ensure your mobile device is connected to the same Wi-Fi router that you would like to setup the smart Wi-Fi LED using 2.4GHz connection.
- Download the latest version of the Sengled Home App from the Apple App Store or Google Play Store.
- Register and sign in to your Sengled account in the app.
- Open the Sengled Home app. Go to Devices, select the + sign, and choose Smart Wi-Fi LEDs. Follow in-app instructions to finish setup.
- Ensure your Sengled Home app can discover the light strip. If the app fails to discover the light strip, please refer to the next section “Reset Instructions” for how to reset your light strip before attempting to add it again. Congratulations on successfully installing your Smart Wi-Fi LED Light Strips!
Reset Instructions
To reset your Smart Wi-Fi LED Light Strip, locate the reset button, push and hold for at least 5 seconds. When the Light Strip is successfully reset, it will flash three times. If it does not flash, please try again. Once successfully reset, please pair the Light Strip again in your Sengled Home app.
Operation
The following section outlines some of the popular operational modes of the Sengled Smart Wi-Fi LED Light Strips.
-
On / Off
The light strip can be controlled through a variety of means:- Use the control button on the controller
- Through Sengled Home app (including Widget)
- Through partner programs like Alexa, Google Assistant, SmartThings (cloud-to-cloud), etc.
-
Dimming
The light strip can be dimmed through the following:- Through Sengled Home app (including Widget)
- Through partner programs like Alexa, Google Assistant, SmartThings (cloud-to-cloud), etc.
-
Scheduling
Schedules can be created with Sengled Home app.- Check the in-app how-to pages through “Settings” for the following operations.
-
Voice Control
- Set up Amazon Alexa by adding Sengled Home Skill.
- Set up Google Assistant by adding Sengled Home Service.
-
Tuning Whites
Adjust whites via the white palette in the Sengled Home app, or with voice control. -
Changing Colors
Change between 16 million colors using the color palette in the Sengled Home app, or with voice control. -
Color Cycling
The light strip can be color cycled if you hold down the button on the controller. To select a color, simply release the button.- Control Button Single click: Turn the Light Strip on/o˜.
- Hold down: Color cycle the Light Strip and release the button to select a color.
TROUBLESHOOTING FAQ’S
-
Sengled Smart Wi-Fi LED Light Strip appears offline or unresponsive, what should I do?
- Please check the Power adapter make sure the power is On. Push the control button to make sure the light strip is responding.
- Power cycle the Wi-Fi LED Light Strips, wait 1 minute and check the status.
- Please make sure your home Wi-Fi network and internet connection is working properly.
- If all else fails, try to restart your Wi-Fi router.
-
Can different types of Sengled smart devices be used simultaneously?
Sengled Smart Wi-Fi Light Strips can be used in conjunction with their Wi-Fi bulbs and Zigbee counterparts, the Sengled Smart LED bulbs line, when creating scenes and schedules within your home. Please refer to sengled.com for more information. -
Could not connect to the Wi-Fi router or third-party services?
The firewall or port on your Wi-Fi router may be blocked and could prevent the Sengled Wi-Fi Light Strips from connecting to the Sengled cloud. A Sengled Home account is required to access third-party services that utilize the Sengled cloud. Please open Port 1883 and 8883 on your Wi-Fi router to ensure connectivity. If your router is preventing access, you will need to enable access to these ports. If you need help with changing your firewall settings: For routers provided by your internet service provider, please contact your internet service provider. For a router you own, please contact the manufacturer of the router. -
Can I cut the light strip if it’s too long?
The length of the light strip can be shortened for special fitting. Once shortened, it is unable to be lengthened again. Please cut along the Cut Line (about every 25 cm, or 9.8 in).
To Shorten:
Limited Warranty:
- 2-year limited warranty from original purchase date. Sengled restrict warranty service for smart home device to the country where Sengled or its authorized retailor originally sold the device. To learn more about the Limited Warranty for Sengled products, please visitwww.sengled.com/warranty
Support:
- If you encounter any issues, please reach out to your local Sengled Support team. Visit the following website for web support: https://support.sengled.com/
Send emails to:
- Support@sengled.zendesk.com (USA)
- SengledCanada@sengled.zendesk.com (CA)
- Dial Customer Support Line 1-877-401-5990
10:00am-8:00 pm CST on Mon-Fri
11:00am-8:00 pm CST on Sat
FREQUENTLY ASKED QUESTIONS
What are the Sengled W1G-N84F Smart LED Strip Lights?
The Sengled W1G-N84F are smart LED strip lights that allow you to customize lighting effects and colors in your living space.
What's included in the package?
The package usually includes the LED strip lights, a power adapter, a controller, and any necessary connectors.
What's the length of the LED strip lights?
The length can vary, but these strips are typically around 6.5 feet (2 meters) long.
Are the LED strip lights flexible?
Yes, these LED strips are flexible and can be bent or shaped to fit various spaces.
Do these lights support color customization?
Yes, the Sengled W1G-N84F lights are capable of displaying a wide range of colors, allowing for customization to suit your preferences.
How do I control the lights?
You can control the lights using a smartphone app or a compatible smart home platform like Amazon Alexa or Google Assistant.
Is a hub required for these lights to work?
No, these lights usually connect directly to your Wi-Fi network, eliminating the need for an additional hub.
What's the power source for the LED strip lights?
The lights are powered by an included AC power adapter.
Are they dimmable?
Yes, these LED strip lights are often dimmable, allowing you to adjust the brightness to your liking.
Can I schedule the lights to turn on and off?
Yes, you can usually set schedules for the lights to turn on, off, or change colors at specific times.
Are the lights suitable for outdoor use?
These LED strip lights are typically designed for indoor use and may not be fully weatherproof for outdoor environments.
How do I install the lights?
Installation usually involves peeling off the adhesive backing and sticking the strip to a clean, dry surface.
Are there any special installation requirements?
It's important to ensure that the surface is clean and free from dust or debris before sticking the strip. Avoid bending the strip too sharply.
Can I cut the LED strip to a shorter length?
Some models allow you to cut the strip at designated points to customize the length, but it's essential to follow the manufacturer's instructions.
What's the expected lifespan of these LED lights?
LED lights generally have a long lifespan, often lasting tens of thousands of hours.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK: Sengled W1G-N84F Smart LED Strip Lights User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>