VEVOR 12x10x6 Inch BXGDQX Electric Metal Box Instruction Manual
- June 12, 2024
- VEVOR
Table of Contents
12x10x6 Inch BXGDQX Electric Metal Box
Instruction Manual
INSTRUCTION/INSTALLATION SHEET
Electric Metal Box
Mounting Plate Installation :
Adopts 4pcs M8 hex head flange nut assembly mounting plate with box body.
Notice:already assembled on box body when exfactory.
Bottom Sealing Plate Installation:
Adopts M5*10mm cross self-tapping screws assembly sealing washer,
bottom sealing plate with box body according to your usage requirement to
mount it or not.
Wall Mounting Pendants Installation:
Adopts 4pcs M8*16mm hex head boit,M8 O-ring,M& nuts mounting 4pcs
wall mounting pendants on the wail.
Grounding Wire installation:
Adopts 2pcs M6 hex head flange nut assembly grounding wire on
M6*12mm copper bolt of box door and bax body.
Notice: already assembled on box body when ex-factory.
Bax Door installation:
Adopts 1pcs M6″12mm flat head cross screw,M6 O-ring, M6 hex head
flange nut assembly hinge on box body, Adopts fixed pin assembly box door on
hinge.
Notice:box door already assembled on box body when ex-factory.
Please read the following twosheets if you need change box door and box lock
Door Lock Installation:
Adopts lock nuts assembly box lock on box door.adopts matched key to
meet bax door open and close.
Notice: already assembled on box body when ex-factory.
Warning: when lock the box door,please tum lock core 90°from vertical
direction to horizontal direction, make sure meet best protection level.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>