COSTWAY HW70217 Building Block Table Set User Guide
- June 12, 2024
- COSTWAY
Table of Contents
**COSTWAY HW70217 Building Block Table Set User Guide
**
Before You Start
Please read all instructions carefully and keep it for future reference.
Warning
Attention: Children should use this product under the parental supervision. Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
WARNING: CHOKING HAZARD
- Small parts.
Not for children under 3 years.
General Warnings
****The product must be installed and used under the supervision of an adult.
****Read through each step carefully and follow the proper order.
****Remove all packaging, separate and count all parts and hardware.
****Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
****We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
****Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface.
**INSTALLATION INSTRUCTIONS FOR THE BUILDING BLOCK TABLE
**
Install the table legs and link into the slots. 3 levels adjustable
There are 4 slots under the table as shown in the picture. Install the table legs, table bases and storage tank into their corresponding slots. There are four slots in the reverse side of the table.
Take out four big screws and rotate them to fix the table legs and storage tank.
Pass the small screws through the four holes of the storage tank and rotate them until they click, indicating the securing of the casters
Hang two receivers on both outer sides of the storage tank.
Sand bowl accessories
Install accessories into the four corners to turn the storage tank immediately into a sand bowl.
Cover the table top to finish the installation of block table.
Upturn the table top to turn it immediately into a block table, and it can be installed both sideways and endways
There is a die cut on one of the edges of the table top, which is used to change the granular soleplate.
Install the accessories of chair in turn into their corresponding slots.
Notes: this product is equipped with a non-slip mat. Take out the table
legs and the chair bases, invert them to the reverse, tear the label off the
non-slip mat and paste it as per figure.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted
Take a photo of the box markings
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
Send us an email with the images requested
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>