Lenovo 63DBRAT1EU ThinkVision P49w-30 Curved Gaming Monitor Installation Guide
- June 12, 2024
- Lenovo
Table of Contents
63DBRAT1EU ThinkVision P49w-30 Curved Gaming Monitor
Installation Guide
63DBRAT1EU ThinkVision P49w-30 Curved Gaming Monitor
The drivers and files for this monitor can be downloaded from
https://pcsupportlenovo.com/solutions/p49w_30
ThinkVision P49w-30 supports Lenovo Display Control Center — ThinkColour
The drivers and files for this monitor can be downloaded from
scan QR code.
https://pcsupport.lenovo.com/solutions/p49w_30
Safety information
DANGER
To avoid shock hazard:
- Do not remove the covers.
- Do not operate this product unless the stand is attached.
- Do not connect or disconnect this product during an electrical storm
- The power cord plug must be connected to a properly wired and grounded power outlet
- Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets
- To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily! accessible.
Handling:
If your monitor weighs more than 18 kg 039.68 lb), it is recommended that it be moved or lifted bw two people
Troubleshooting information
If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem.
Table 2-1. Troubleshooting
| Problem | Possible cause | Suggested action |
|---|---|---|
| The power indicator is not lit and there is no image | • The monitor’s power |
switch is not switched on.
• The power cord is loose or disconnected.
• There is no power at the outlet.| • Be sure the power cord is connected
properly.
• Be sure the outlet has power.
• Power on the monitor.
• Try using another power cord.
• Try using another
electrical outlet.
The power indicator is white, but there is no image.| The video signal cable
is loose or disconnected from the system or monitor.| Be sure the video signal
is connected with the system properly.
The monitor brightness and contrast levels are at the lowest setting.| Adjust
the brightness and contrast setting on the OSD (On Screen Display) menu.
The image quality is unacceptable.| The video signal cable is not connected
with the monitor or system completely.| Be sure the signal cable is firmly
plugged into the system and monitor.
The color settings may be incorrect.| Select another color setting from the
OSD menu.
The automatic image setup function was not
performed.| Perform automatic image setup.
There is a screen message that reads “Out of range” or “HZ?”.
There is no image and the power on indicator is flashing white.| The system is
set to a display mode which is not supported by this monitor.
for your new monitor.| •If you are replacing an old monitor, reconnect it and
adjust the display mode to within the specified range f
•If using a Windows
system, restart the system in safe mode, then select a supported display mode
for your monitor.
•If these options do not work, contact the Support Center.
For additional troubleshooting information, please refer to the User’s Guide.
Manufactured by:
Lenovo Centro TecnolOgico S. de R.L. de C.V. Apodaca Technology Park
Boulevar Escobedo #316
Apodaca, Nuevo Leon, Mexico
C.P. 66601
Marketing by:
Lenovo Mexico S. de R.L. de C.V. Av. Santa Fe 505, Piso 15
Col. Cruz Manca
Cuajimalpa, D.F., Mexico
C.P. 05349
Tel. (55) 5000 8500