45×70 LED Spiegel DSK Chrystal Fairy 2.0 User Manual
- June 12, 2024
- Chrystal Fairy
Table of Contents
45×70 LED Spiegel DSK Chrystal Fairy 2.0
Product Information
- Product Name: Chrystal Fairy 2.0
- Size: 45×70 cm
- LED Type: 2835-60
- Maximum Power: 12W
- Power Supply: 220-240V AC, 50Hz
Product Usage Instructions
- Unpack the product and ensure that all the components are included.
- Identify the mirror (1) and place it in the desired location.
- Secure the mirror using the provided screws (2). Use four screws in total.
- Attach the brackets (3) to the back of the mirror. Use two brackets in total.
- Prepare the wall for installation by drilling holes and inserting the dowels (4). Use four dowels in total.
- Align the brackets on the mirror with the dowels on the wall and secure them together.
- Ensure that the power supply is connected to a professional electrical source.
- Switch on the power supply to activate the LED light source.
Note: For proper installation and usage, it is recommended to seek professional assistance.
| No. | Description | Q-ty |
|---|---|---|
| 1 | Mirror | 1 |
| 2 | Screw | 4 |
| 3 | Bracket | 2 |
| 4 | Dowels | 4 |
Operating instructions
Dear Customer,
We thank you for the trust you put in our products! Read these instructions
for use carefully before using the product for the first time! These
instructions contain all information necessary to safely use this product and
provide for its extended lifespan. Please make sure to observe all safety
information included in these instructions!
Safety instructions
-
The light may be installed indoors only.
To operate this product safely, the user must have read and understood these instructions for use before using the product for the first time. -
The product may not be used unless it is undamaged an‹ functions properly. If the product or parts of it have become defective, have it repaired by a specialised tech- nician.
-
When drilling in walls, ceiling or floors, pay attention to any installed cables as well as gas and water lines.
-
The electrical connection may be carried out only by a suitably qualified electrical specialist.
-
Use only connection clips authorised by the manufac- turer.
-
For operation of the device in the bathroom, the safety distances must absolutely be adhered to (- fig. 1). It must be ensured the people who are in the bathtub or shower cannot reach the device.
Installation ****
Risk of fatal injury due to electric shock!
The electrical connection may be carried out only by a suitably qualified
electrical specialist. Before installation, it must be ensured that there is
no current to the electrical network (switch o fat main switch or remove
fuse).
Cleaning
Clean the product with a cloth dampened slightly with clean water (with the
addition of a mild cleaning agent if necessary). Wipe dry.
- Do not use any sharp or abrasive objects, or aggressive cleaning agents.
Disposal
Disposing of the product
Products which are labelled with the adjacent symbol must not be disposed of
in household rubbish. Youmust dispose of such old electrical and electronic
equipment separately.
Disposing of the packaging
The packaging consists of cardboard and correspondingly mar ed plastics that
can be recycled.
- Make these materials available for recycling
Malfunctions and troubleshooting
Danger of physical injury and death!
Improperly conducted repairs may prevent your product from working safely.
Such repairs will endanger you and your surroundings.
Technical data
- Light
- Illuminant
- Protection class
Warranty
- 2 years warranty time
LED strip replacement help
- DSK GmbH
- Rögen 52, DE – 23843 Bad Oldesloe
- Tel: +49 (0)4531 16 16
- Fax: +49 (0\4531 16 17 00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>