Panasonic WV-PM500 Compact Microphone Unit Instruction Manual
- June 12, 2024
- Panasonic
Table of Contents
Panasonic WV-PM500 Compact Microphone Unit
Product Information
- The product is a microphone unit (Model No. WV-PM500) designed for professional outdoor use. It is manufactured by i-PRO Co., Ltd. The microphone unit is used for audio input of network cameras and can be used regardless of the cable length specification of the camera.
- The microphone type is an electret condenser microphone with a plug-in power type feeding method. It operates within a voltage range of 1.5 V DC to 5 V DC and has a maximum current of 300 A. The microphone has a non-directional directionality and a frequency range of 20 Hz to 15,000 Hz. It has a sensitivity of 60 dB or more A-weighted (f=1 kHz Pin=1 Pa) and a maximum sound pressure level (SPL) of 110 dB (THD=10%).
- The microphone unit is equipped with dustproof and waterproof terminal/cable connections. The cable length is 2.6 m (8.53 feet), and the total mass of the unit is approximately 60 g (0.13 lbs) including the cover and cable. The main body and covers are made of PC resin in i-PRO white finish, while the wall mount attachment is made of PC resin in black finish.
Product Usage Instructions
- Securely mount the microphone unit to an installation surface according to the provided Installation Guide to prevent injury or accidents.
- If the microphone unit needs to be mounted on a section that may not be sufficiently reinforced, ensure that the section is reinforced adequately.
- To prevent noise disturbance in video or audio, keep the microphone unit at least 1 m (3.28 feet) away from strong electric fields generated by TV or radio antennas, motors, transformers, or power lines (lamp lines) of AC100 V or more. Alternatively, conduct the power distribution work using metal pipes and ensure proper grounding.
- If the microphone unit will no longer be used, remove it from the installation.
- For detailed installation procedures, refer to the provided Installation Procedure Leaflet.
For more technical information and support, visit the i-PRO website: https://i-pro.com/global/en/surveillance/trainingsupport/support/technical- information
For disposal of old equipment and batteries in the European Union and countries with recycling systems, follow the appropriate recycling procedures.
Operating Instructions
- Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
- The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
- i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
- Control No used in these documents should be used to search for information on our technical information website ( https://i-pro.com/global/en/surveillance/trainingsupport/support/technical-information) and will guide you to the right information.
Preface
- This product is a microphone unit for audio input of our network camera.
- This product can be used regardless of the cable length specification of our network camera.
- The latest information about the supported products
Specifications
Microphone type and
power feeding method
| Electret condenser microphone
Plug-in power type
---|---
Power:| Operating voltage: 1.5 V DC to 5 V DC
Maximum current: 300 μA
Operating environment
Ambient operating temperature: Ambient operating humidity:
|
–20 °C to +60 °C {–4 °F to +140 °F}
10 % to 100 % (no condensation)
Storage environment
Storage temperature: Storage humidity:
|
–20 °C to +60°C {–4 °F to +140 °F}
10 % to 95 % (no condensation)
Directionality:| Nondirectional
Frequency range:| Within 20 Hz – 15,000 Hz
Sensitivity:| –40 dB ±3 dB (0 dB=1 V/Pa)
Max SPL:| 110 dB (THD=10 % )
SNR:| 60 dB or more A-weighted (f=1 kHz Pin= 1 Pa)
Terminal / Cable:| Terminal: ø3.5 mm stereo mini plug (L ch
monaural) Plug diameter: ø6.5 mm {1/4 inches}
Cable length: 2.6 m {8.53 feet}
Cable diameter: ø3 mm {1/8 inches}
Dustproof and Waterproof:| IP65 (IEC 60529)
Dimensions:| ø45 mm × 15.5 mm (D) (with cover A)
{ø1-25/32 inches × 5/8 inches (D)}
23 mm (W) × 31.8 mm (H) × 15.5 mm (D) (without cover)
{29/32 inches (W) × 1-1/4 inches (H) × 5/8 inches (D)}
Mass:| Approx. 60 g {0.13 lbs}
(with the cover: Approx. 10 g {0.02 lbs} and cable)
Finish:| Main body: PC resin, i-PRO white
Cover A, Cover B: PC resin, i-PRO white
Wall mount attachment: PC resin, Black
Caution:
- Before attempting to connect or operate this product, please read these instructions carefully.
Notice:
- This product is not suitable for use in locations where children are likely to be present.
- Do not install this product in locations where ordinary persons can easily reach.
- This product is a professional equipment.
- For information about screws and other parts required for installation, refer to the corresponding section of this document.
Precautions
- Do not hang down from this product or use this product as a pedestal.
- Failure to observe this may cause injury or accidents.
- Refer installation work to the dealer.
- Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
- The screws and bolts must be tightened to the specified torque.
- Failure to observe this may cause a drop resulting in injury or accidents.
- Install the product securely on an installation surface in accordance with the installation instructions.
- Failure to observe this may cause injury or accidents.
- When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.
Precautions for installation
- In order to prevent injury, the product must be securely mounted to an installation surface according to Installation Guide.
- Installation area for this product
- Select an appropriate place for the installation area (such as a strong installation surface) in your particular environment.
- Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.
- Install the camera in the foundation area of the architecture or where sufficient strength is assured.
- Do not mount the product on a plaster board or a wooden section because they are too weak. If the product is unavoidably mounted on such a section, the section shall be sufficiently reinforced.
- Do not place this product in the following places
- Locations where a chemical agent is used such as a swimming pool
- Locations subject to moisture or oil smoke such as a kitchen
- Locations that have a specific environment that is subject to an inflammable atmosphere or solvents
- Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated
- Locations near coasts directly subjected to sea breezes, or locations subject to corrosive gases such as from hot springs, volcanic regions, etc.
- Locations where the temperature is not within the specified range
- Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines (This product is not designed for on-vehicle use.)
- Locations subject to condensation as the result of severe changes in temperature
- Locations near rubber products containing sulfur (packing, rubber feet, etc.)
- When noise disturbance may happen
- Noise may appear in video or audio near a strong electric field from a TV or radio antenna, motors and transformers, or a strong electric field/magnetic field from a power line (lamp line) of AC100 V or more. Conduct the power distribution work to keep 1 m {3.28 feet} away from them or conduct the electric conduit work using metal pipes. (Be sure to make ground connection of the metal pipes.)
- Make sure to remove this product if it will no longer be used.
- For information about the installation procedure, refer to the provided Installation procedure leaflet.
Disposal of Old Equipment and Batteries
- Only for European Union and countries with recycling systems
- These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
- For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
- By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.
- For more information about collection and recycling, please contact your local authority.
- Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation
- Tokyo, Japan https://www.i-pro.com/
- Authorised Representative in EU: i-PRO EMEA B.V.
- Laarderhoogtweg 25, 1101 EB
- Amsterdam, Netherlands
- i-PRO EMEA B.V. UK Branch 1010 Cambourne Business Park, Cambridgeshire CB23 6DP
Read User Manual Online (PDF format)
Loading......