My Weigh Phoenix Talking Scale Instruction Manual
- June 12, 2024
- My Weigh
Table of Contents
Capacity
150kgx0.1kg, 330lbx0.2lb
Phoenix Talking Scale
Thank you for purchasing the My Weigh® Phoenix™ TALKING digital scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. With normal care and proper treatment, it will provide years of reliable service. For more information please visit www.myweigh.com
OPERATION INSTRUCTIONS
Inserting batteries
Insert a 9V battery into the battery compartment on the bottom (underside)
of the scale.
Taking measurement
a. Step onto the measurement platform. The scale will say “Hello”. Now step
off the platform and wait a few moments
b. Once the platform is stable, it’ll say “It’s ready” and show “0.0 Ib” (or
0.0 kg). Then you may step onto the measurement platform again. Your weight
will be displayed and read out once the reading is steady.
c. You may step off of the platform and the reading will hold for 10 secs.
After that it’ll say “Good-bye” and turn off automatically.
Power off
The power will shut down automatically after no operation is detected for
about 10 seconds.
Switching on/off the talking function
Use the switch on the bottom of the platform to switch on/off the speaker
function.
Changing the Unit
Turn the Scale ON, “0.0” will show on the display” press the [kg/Ib] button
on the front of the scale (under the display) to select the desired unit (LB
or KG)
Selecting language
After showing “0.0”, press and hold the [kg/Ib] button for 7 seconds. You
will hear “Hello” of the existing language. Press the [kg/Ilb] button shortly
to select the language. You can hear “Hello” of other languages. To confirm
the selection, press and hold the [kg/Ib] button until it says “Goodbye”.
IMPORTANT NOTES
***lf the Scale ever malfunctions please try installing a new battery, sometimes a low battery or defective battery may cause inaccurate readings or other errors
- When the battery runs very low, the warning icon will appear on the display. When this happens, be sure to replace the battery immediately on the underside of the scale.
- When over-loaded, “FFFF” will be displayed.
- Use the unit on hard, flat, dry and secure surface only.
- Place the unit in an area free from high temperature or high humidity. To clean, use dampened cloth and mild detergent.
- Avoid excessive impact or vibration to the unit.
- If you do not intend to use this unit for a long period of time, remove the battery before storage.
- Do not attempt to disassemble the unit, otherwise the warranty will become void.
- The unit is intended for home and personal use only (not legal for commerce).
- This scale must only be used on a hard surface such as tile, wood linoleum or short carpet.
This and most bath scales will not perform properly on thick-carpeted surfaces.
Capacity| 150kg x 0.1kg
3301b x 0.2Ib| Units| kg, lbs
---|---|---|---
Deviation| +/- 1%
Temperature range| Optimum 15-20°C
Power source| 1 x 9V