tp-link TL-POE10E PoE+ Extender Installation Guide

tp-link TL-POE10E PoE+ Extender Installation Guide

Installation Guide PoE+ Extender

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join
TP-Link Community

For technical support and other information, please visit https://www.tp- link.com/support, or simply scan the QR code

Connection

Note:

1. Make sure the Power Sourcing Equipment (PSE) and PD devices are connected to the corresponding ports properly.
2.  The extender supports both Auto-Negotiation mode and 10Mbps mode. In 10Mbps mode, the maximum speed will downgrade to 10 Mbps.
3.  The total cable length (a+b) is not recommended to exceed 350m, and the actual transmission distance may vary due to the type and quality of cables, power consumption of PD devices, voltage at PSE, etc. If a or b ＞ 100m, enable 10Mbps mode first.
4. If 100m ＜ a ≤ 250m, make sure the PSE supports extend mode.

Power LED Explanation

Specifications

General Specifications

Safety Information

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS). Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

FAQ

Q1. Which devices can work normally with the extender?

A: Only PSE and PD devices compliant with IEEE 802.3 af/at can function well with the extender. Do not use the extender with other devices to extend the data transmission distance only.

Q2. Why is the Power LED not lit?

A1: Ensure your network cable is in good condition.
A2: Ensure both PSE and PD devices are connected to the correct ports

Q3. When should I enable the 10Mbps mode?

A: If you want to extend the transmission distance between the extender and

Explanation of the Symbols on the Product Label

The product label is at the bottom of the product

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://[www.tp- link.com/en/ce.](http://www.tp-link.com/en/ce)

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at https://[www.tp- link.com/support/ukca](http://www.tp-link.com/support/ukca)

Read More About This Manual & Download PDF:

References

• TP-Link Community
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>