EKVIP 023741 Wall Spotlight Instruction Manual

June 12, 2024
EKVIP

EKVIP 023741 Wall Spotlight Instruction Manual
EKVIP 023741 Wall Spotlight

SAFETY INSTRUCTIONS

  • The product is only intended for outdoor use.
  • Switch off the power supply before installation.
  • Before cleaning, maintenance and/or other work on the product, switch off the power supply by removing the fuse or pulling out the plug.
  • Products with transformers must only be used with the original transformer.
  • Do not allow children to play with the packaging material or the product.
  • These instructions should be enclosed with the product if it is sold or passed on.
  • Do not connect the lamp to the mains while it is still in the pack.
  • Stop using the product immediately if it gets damaged, especially the power cord, plug and/or lamp socket, and if it is not working properly.
  • Repairs must be carried out by an authorised electrician.
  • Never attempt to modify or repair the product. Repairs that are not carried out correctly can result in a risk of serious personal injury and/or death.
  • The product’s earth wire (green/yellow) is connected to earth.
  • Be careful not to damage the insulation on the wires during installation. Make sure that the wires do not come into contact with sharp edges. Damaged insulation can result in a risk of electric shock.
  • Check that the mains voltage corresponds to the rated voltage on the type plate.
  • The plug, power cord, wires and connections must not be subjected to mechanical stress.

IMPORTANT:

New installations and extensions to existing systems must always be carried out by an authorised electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords and light sockets. Incorrect installation can result in fatal injury and the risk of fire.

SYMBOLS

Read the instructions.

Caution! Risk of electric shock.

For non-replaceable light sources: The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Non-replaceable actuator.

Approved in accordance with the relevant directives.

Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Voltage: 230 V ~ 50 Hz
  • Output: 3 W
  • Colour temperature: 3000 K
  • Luminous flux: 300 lm
  • Life span: 50000 h
  • Protection rating: IP44
  • Size: L8 x W6.3 x H7.5 cm

INSTALLATION

See figures for installation FIG. 1-8

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION

See figures for removal FIG. 9-16

INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

EKVIP logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

EKVIP User Manuals

Related Manuals