SVEN E-717BT Wireless Stereo Headphone with Microphone User Manual

SVEN E-717BT Wireless Stereo Headphone with Microphone

Product Information

Product Name: SVEN E-717BT
Product Type: Bluetooth Headphones Manufacturer: SVEN

Product Usage Instructions:

1. Charging the Headphones: – Connect the included USB cable to the charging port on the headphones. – Connect the other end of the USB cable to a power source, such as a computer or a USB charger. – The LED indicator on the headphones will light up to indicate that the headphones are being charged. – Allow the headphones to fully charge before using them.

2. Pairing with a Bluetooth Device: – Ensure that the headphones are turned off. – Press and hold the power button on the headphones until the LED indicator starts flashing blue and red. – Enable Bluetooth on your device (e.g., smartphone, tablet, computer) and search for available devices. -Select “SVEN E-717BT” from the list of available devices on your device’s Bluetooth settings. – Once connected, the LED indicator on the headphones will stop flashing and remain solid blue.

3. Controlling Playback and Volume: – Play/Pause: Press the multifunction button once. – Skip to Next Track: Double press the multifunction button. – Skip to Previous Track: Triple press the multifunction button. – Adjust Volume: Press the volume up or
   volume down buttons.

4. Answering/Ending Calls: – To answer an incoming call, press the multifunction button once. – To end a call, press the multifunction button once again.

5. Additional Features: – Built-in Microphone: The headphones have a built-in microphone for hands-free calling. – Voice Assistant Support: The headphones support voice assistants like Siri or Google Assistant. Activate your device’s voice assistant by pressing and holding the multifunction button. 6. Powering Off: – To power off the headphones, press and hold the power button until the LED indicator turns off. Note: For detailed information on the product’s features and specifications, refer to the SVEN E-717BT user manual available at the following link: User Manual

Congratulations on your purchase of the SVEN stereo headphones!

COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (25.08.2021).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on «as is» terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has
arisen from the information contained in this Manual.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box

APPLICATION

SVEN E-717BTwireless stereo headphones with microphone are designed for operation with PC, notebookes and other mobile devices by means of data transfer via Bluetooth protocol.
They can be also used in internet telephony, during video conferences, in multimedia applications, in interactive games, for speech recognition and foreign language teaching.

PACKAGE CONTENTS

• Wireless stereo headphones set – 1 pc
• USB-A power cord to Type-C – 1 pc
• Charging case – 1 pc
• User Manual – 1 pc
• Warranty card – 1 pc

SAFETY PRECAUTIONS

• Don’t use the stereo headphones while driving.
• Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.

SPECIAL FEATURES

• Bluetooth wireless signal transmission
• Touch control of incoming calls and track switching
• Two additional sets of interchangeable ear pads
• Battery operation time up to 6 hours
• Operating time using a charging case up to 24 hours

DESCRIPTION

1. Headphones LED indicator
2. Multifunction sensor button
3. Microphone
4. Charging case LED indicator
5. TYPE-C jack for battery charging

CONNECTION

First connection

• Remove both headphones from the charging case, then put them back to the case to activate the headphones.
• If there is a protective film on the contacts, you must remove it before using the headphones.
• The battery in the headphones and case is used as an integral part of the device.
  Before using for the first time, make sure that the headphones are ful ly charged. If the headphones are discharged, they need to be fully charged (see headphone charging section).

Headset to a device interfacing

It is necessary first to interconnect the device with a signal source (see the connection

Note: if you cannot connect the headset, try the following steps manually:

• Remove one of the headphones from the charging case;
• The white LED flashes quickly, touch and hold the multifunction sensor area for 6 seconds. The LED will go out. Put the headset back in the charging case;
• Take out the other earphone and do the same.

Charging the case

Charge the headphone case using the USB-A to USB-C cable (included). White LEDs © flash while charging. When the case is fully charged, all 4 LEDs glow white. The left LED on the case will flash when the battery is low.

Case Headset Charging

• Put the headphones to the charging case. During battery charging indicator ® lights red.
  When device is charged fu ll, indicator ® go out.

• The battery in the headphones and case is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

Device switching on

• Remove the headphones from the charging case and they will automatically turn on.
  Make sure the headphones are charged.

Device switching off
Put the headphones to the charging case. They will automatically turn off.

Headphone control
When connected to a telephone:

• In order to receive an incoming call press twice multifunction button ©. Press button © twice again to fin ish the call.
• Siri or Google Assistant: tap 3 times on any of the headphones*.
• Play/pause: tap any of the headphones 2 times.
• Next track: touch and hold the right earpiece for 2 seconds.
•  Previous track: touch and hold the left earpiece for 2 seconds.

TECHNICAL SPECIFICATIONS

Notes

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

References

• e-717bt_manual.pdf - Яндекс.Документы

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>