XRocker KT-20230530 Cerberus Twist TV Gaming Bed Instruction Manual
- June 12, 2024
- XRocker
Table of Contents
XRocker KT-20230530 Cerberus Twist TV Gaming Bed Instruction Manual
SAFETY AND CARE ADVICE
IMPORTANT – READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
- Check you have all the components and tools listed on the following Remove all fittings from the plastic bags and separate them into their groups.
- Keep children and animals away from the work Small parts may cause a choking hazard.
- Dispose of all packaging carefully and
- Place the product on flat and steady surface during
- Assemble on a soft level surface to avoid damaging the unit or your
- Keep these instructions for further
- Never allow anyone to sit on the foot end of the Keep children well away from moving parts. If you have young children in the home, always disconnect the power at the wall socket for extra safety.
- Never touch moving parts or any part of the equipment whilst in use – if something needs to be checked, disconnect the power first. The socket providing the power must be accessible at all times in case you need to switch off the power quickly.
- All approved mains powered extension leads, used to power the equipment, must not be placed where they can be walked on this is dangerous and could lead to accidents.
- Do not expose the bed to an undue level of heat – keep away from
- Do not place any vessel containing liquids on the TV footboard or TV itself which may accidentally spill and cause damage to your bed, the TV, the TV mount or your console
PFLEGE UND WARTUNG
- Only clean using a damp cloth and mild detergent, do no use bleach or abrasive
- Regularly check and ensure that all bolts and fittings are tightened
PRAKTISCHE TIPPS
- To ensure an easier assembly we strongly advise that all fittings are only finger tightene during initial Only upon completion of the assembly should all fixing points be fully tightened.
- Make sure you have enough space to layout the parts before
- Check you have all the components and tools listed on the following Remove all fittings from the plastic bags and separate them into their groups.
- Keep children and animals away from the work Small parts may cause a choking hazard.
- Dispose of all packaging carefully and
- Place the product on flat and steady surface during
- Assemble the item as close to its final position (in the same room) as Parts of the assembly will be easier with 2 people
IMPORTANT: YOU MUST KEEP YOUR ORIGINAL RETAIL RECEIPT AS PROOF OF PURCHASE.
WICHTIG: SIE MÜSSEN IHREN ORIGINALKAUFBELEG ALS KAUFBELEG AUFBEWAHREN.
IMPORTANT : VOUS DEVEZ CONSERVER VOTRE REÇU DE CAISSE ORIGINAL COMME PREUVE
D’ACHAT. IMPORTANTE: DEBE CONSERVAR SU RECIBO DE COMPRA ORIGINAL COMO
COMPROBANTE DE COMPRA. IMPORTANTE: È NECESSARIO CONSERVARE LA RICEVUTA DI
ACQUISTO ORIGINALE COME PROVA D’ACQUISTO. BELANGRIJK: U MOET UW ORIGINELE
KASSABON BEWAREN ALS AANKOOPBEWIJS.
VIKTIGT: DU MÅSTE BEHÅLLA DITT ORIGINALKVITTO SOM BEVIS PÅ KÖPET. WAŻNE:
NALEŻY ZACHOWAĆ ORYGINALNY PARAGON JAKO DOWÓD ZAKUPU.
PARTS
FITTINGS
NOTE 1: The TV mount is attached with M6 screw. If you’re using M4 screw to
assemble the TV screen, please use part G washer as provided to make sure M4
screw could be also workable for it.
NOTE 2: If the TV pole can’t be rotated freely, please loosen Screw B in step
10 a little. Do not 100% tighten it.
