TESLONG TS43 4.3-Inch Screen Inspection Camera Instruction Manual
- June 12, 2024
- TESLONG
Table of Contents
Product Manual
Digital Inspection Endoscope
Product Manual
TS43 is a high-performance industrial endoscope with a 4.3-inch high-
definition color screen. Photo and video recording functions are supported,
and saved to a TF memory card (Micro-SD card). This product is equipped with
an LED ring light and small-diameter HD camera. The camera uses a high-
sensitivity chip to get the best view in the darkest places.
Warning: This product is an industrial endoscope camera and is not
intended for medical use or human examination.
Safety and Maintenance
- The camera probe is a delicate electronic device, do NOT hit the camera probe, Do NOT pull on the cable.
- The probe features a waterproof protective layer so take extra care to avoid it from being scratched during usage.
- The camera probe materials are not resistant to high temperature. When examining any combustion engine, please ensure that temperature inside the engine has cooled.
- This product is not suitable for people with limited physical, sensory or mental capabilities.
- Do NOT allow children to touch or operate this device.
- In case the device is damaged, Do NOT disassemble it by yourself. Please contact the seller or the agent where you bought it to get repair service.
Battery description
- Please use a 5V household charger that meets safety regulations to charge this device.
- This device can work while charging.
- If you do not use the device for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
- Camera probe
- Up selection button: Zoom Down selection button: Rotate
- Mode switch button: switch between three function modes: Photo taking, video recording and playback
- Enter button: Confirm selection/ Freeze screen/ Play/ Pause
- Settings button: Enter/ Exit settings menu
- Snap button: Photo taking/ Start video recording/ End video recording/ Press and hold the button for a few seconds to switch between the front-view camera and side-view camera
- Power button: Press and hold the Power button to turn ON/OFF
- Light control button: To adjust the the LED’s brightness of the camera
- Charging port
- Reset button
- TF card slot (Micro SD)
Instructions
Press & hold the Power button for a few second to turn ON/OFF device. Insert
a TF card Charge this device.
Insert TF card:
- Power off device first before insert TF card
- Make sure the direction and the front and back sides is correct when insert the TF card
- Do not use excessive force when inserting or removing the TF card to prevent damages of card slot structure.
Use equipment
Language Settings
The default language is English, and the system supports English, Simplified
Chinese, German, French, Spanish, Italian, Russian, Japanese, Traditional
Chinese, Korean and Portuguese.
Setting path:
- Press the “Settings” button to enter the menu.
- Select language setting.
- Press the up and down button to select the desired language.
- Press the“OK”button to save changes.
Photo taking/Video recording/Playback Press to switch to the“photo
taking” or“video recording “mode, and press to take a photo or start
recording. Press to switch to playback mode, press to select photo or video to
view, and press to delete photo or video.
Copy photo and video files to computer
You can sue a TF card reader to copy data directly or use a Micro USB cable to
connect to a computer for copying
Specification Parameters
Screen
Screen: 4.3-inch HD Display
Support probe resolution(Pixels): 1.0 Megapixel HD
Snapshot resolution(Pixel): 1920×1080
Video Recording resolution(Pixel): 1280×720
Port: Micro charging port, TF memory card slot
Camera
| Single lens| Double lens| Three lens
---|---|---|---
Diameter| 5.5mm/7.0mm| 7.0mm| 7.9mm
Resolution| 1.0 Megapixel HD
Viewing Angle| 70°| 70°| 78°
Light Source| 6 adjustable high intensity LEDs| 6+ 1 adjustable high intensity
LEDs| 6+ 1 +1 adjustable high intensity LEDs
Depth of Field| A Camera| 30-100mm| 30-100mm| 30-100mm
B Camera| | 20-50mm| 20-60mm
C Camera| | | 15-30mm
Others
Operating Temperature: 32°F to 113°F (0°C to 45°C)
Power Source: 2000 mAh Lithium Battery
Max battery life: 2.5-3 hours
Charging time: 3 hours
Packaging
Monitor, Micro charging cable, user manual
Accessories: pick up hook, magnet, mirror(Only the camera of single lenses
with a side-view mirror)
©TS43 B0413 V4.0
3.06.11.000212
Documents / Resources
|
TESLONG TS43 4.3-Inch Screen Inspection
Camera
[pdf] Instruction Manual
TS43, TS43 4.3-Inch Screen Inspection Camera, 4.3-Inch Screen Inspection
Camera, Screen Inspection Camera, Inspection Camera, Camera
---|---