marta MT-IR1213A Steam Iron User Manual
- June 12, 2024
- MARTA
Table of Contents
marta MT-IR1213A Steam Iron
Product Information
Product Name: Steam Iron
Model: MT-IR1213A
Description: This steam iron features a fill opening, steam jet button,
temperature dial, temperature indicator, soleplate, water tank, continuous
steam switch, and handle release button. Please note that the actual set of
the appliance may differ from what is listed in the user manual.
Manufacturer: Cosmos Far View International Limited
Contact Information
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Phone: +86 8(812) 325-23-34
Website: http://multimarta.com/
Product Usage Instructions
Setting Temperature
The temperature dial on the steam iron allows you to set the desired
temperature for ironing different types of textiles. Refer to the label on
your clothing to determine the appropriate temperature setting. The following
guidelines can be used as a reference:
- Do not iron articles labeled as “Do not iron this article”.
- Synthetics: Use a lower temperature setting.
- Silk, Wool: Use a medium temperature setting.
- Cotton, Linen: Use a higher temperature setting.
Filling the Water Tank
Before using the steam function, make sure to fill the water tank with
clean water. Follow these steps:
- Locate the fill opening on the steam iron.
- Pour water into the fill opening until the water tank is filled to the desired level.
Emptying the Water Tank
The water tank should be emptied after each use to prevent water from
stagnating. Follow these steps:
- Ensure that the steam iron has cooled down.
- Place the steam iron in an upright position on its heel rest.
- Plug in the steam iron and set the temperature to the maximum.
- Allow the steam iron to heat for 2 minutes.
- Unplug the steam iron from the power supply.
Steam Ironing
To use the steam function of the iron, follow these steps:
- Ensure that the water tank is filled with water.
- Set the desired temperature using the temperature dial.
- Press the steam jet button to release steam while ironing.
Cleaning
Regularly clean the soleplate of the steam iron to remove any residue or
build-up. Refer to the user manual for specific cleaning instructions.
Storage
After use, allow the steam iron to cool down completely before storing it
in a safe and dry place.
Specifications
Power Supply: 230V ~ 50Hz
Manufacturer: Cosmos Far View International Limited
Contact Information
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Phone: +86 8(812) 325-23-48
DESCRIPTION
Parts list
- Fill opening
- Steam jet button
- Temperature dial
- Temperature indicator
- Soleplate
- Water tank
- Continuous steam switch
- Handle release button
CAUTION
Read this manual carefully before using the appliance and save it for future
reference.
- Before the first use, check the device specifications and the power supply in your network.
- It is not intended for industrial use.
- For indoor use only. Use only for domestic purposes according to the instruction manual.
- Do not use it with a damaged cord, plug, or other injuries.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to frame and repair the appliance by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact the service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Place the steam iron on the ironing board carefully.
- Be careful do not to touch metal parts of the working surface and water tank during operation.
- Avoid of ironing zippers, rivets, etc., as they can scratch the soleplate.
- Do not place steam iron on the metal or rough surface.
- Move the steam iron carefully to avoid burns, because of there could be hot water leakage, as well as hot steam
USING THE APPLIANCE
SETTING TEMPERATURE
- Sort the fabric: wool with wool, cotton with cotton, etc. Start ironing the fabrics requiring the lowest temperature and progress to the higher ones, because the steam iron heats up quicker than it cools down.
- If the fabric consists of various kinds of fibers, start ironing the fabrics requiring the lowest temperature (e.g. article consisting of 60% polyester and 40% cotton should be ironed at the temperature indicated for polyester (•) and without steam.
- Turn the temperature control dial around until it is opposite the setting pointer
FILLING THE WATER TANK
- Unplug the steam iron before filling.
- Hold the steam iron in the horizontal position.
- Slowly pour water into the water-fill opening with the help of a plastic beaker.
- Do not overfill the water tank in order to avoid spilling out of water.
- If you have to refill while ironing, unplug the appliance from the power supply before filling.
EMPTYING THE WATER TANK
The water tank should be emptied after each use.
- Unplug the steam iron from the power supply.
- While the steam iron is still warm, hold the steam iron over a sink and allow the steam iron to drain by tipping the point of the steam iron down.
- Gently shake the steam iron to loosen any water drops that may be trapped. The warmth of the iron should dry out any remaining water.
NOTE : If you empty the water tank after the steam iron has cooled down, set the steam iron in an upright position on its heel rest, plug it in, and set the temperature to the maximum, heat for 2 minutes. Unplug the steam iron from the power supply.
STEAM IRONING
- With the unit unplugged, fill the steam iron with water.
- Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug in.
- Set the temperature to the maximum.
- Switch on the continuous steam switch.
- When the light indicator is off, the steam iron has reached the desired temperature.
When finished, unplug the appliance from the power supply.
CAUTION: Avoid coming in contact with escaping steam.
DRY IRONING
- The steam iron can be used on the dry setting with or without water in the water tank, however, it is best to avoid having the water tank too full of water while dry ironing.
- Switch off the continuous steam switch.
- Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug it in.
- Select the temperature best suited for the fabric to be ironed.
- When the light indicator is off, ironing may commence.
- When finished, unplug the appliance from the power supply.
CAUTION: If the steam iron has been used for a long time, is hot and there is no water, do not refill it with water until the steam iron has cooled down.
STEAM BURST
Make sure that there is enough water in the water tank.
- Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug it in.
- Set the maximum temperature.
- Press the steam jet button.
CAUTION: Hold the steam jet button pressing not more than 5 seconds to avoid hot liquid leakage.
CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
- Clean the exterior with a damp cloth and wipe dry.
- Do not use abrasive cleaners.
STORAGE
- Unplug the steam iron from the power supply and allow it to cool down completely.
- Empty the water tank after each use, and then wrap the cord around the heel rest.
- To protect the soleplate, place the steam iron in an upright position on its heel rest.
SPECIFICATION
Power supply: 230 V ~ 50 Hz
Manufacturer: Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK
COATING, RUBBER SEALS, ETC.)
The production date is available in the serial number located on the
identification sticker on the gift box and/or on the sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, and the 6th and 7th indicate the year of device
production. A producer may change the complete set, appearance, country of
manufacture, warranty, and technical characteristics of the model without
notice. Please check when purchasing the device. Made in China