ggm gastro STPOE930N Rotating And Non Rotating Gas Pizza Oven User Guide

ggm gastro STPOE930N Rotating And Non Rotating Gas Pizza Oven

Product Information

GENERAL INFORMATION

The Rotating and Non-Rotating Gas Pizza Oven, also known as Kasap Tip Dik Buzdolaplari, is a high-efficiency oven designed for industrial kitchens. It comes in three different product codes:

• STPOE930N
• SPOGE9N
• GPORE630

Each product code has different dimensions, weight, and technical specifications. Please refer to the table below for more details:

TECHNICAL INFORMATION

Here are the technical specifications for each product code:

Product Code| Inner Dimensions (mm)| Capacity (pieces)| Gas Power (KW)| Electric Power (KW)| Operating Voltage (V)| Operating Pressure (mbar)| Feeding Cable
---|---|---|---|---|---|---|---
STPOE930N| 130 pizza/h| NG 28,7 / LPG 34,8| 2| 220| 21| 32,5
SPOGE9N| 130 pizza/h| 41,2| 2| 220| 21| 32,5
GPORE630| 450| 130 pizza/h| 3| 220| 21| 3*2,5

TRANSPORTATION

The oven must be transported using a forklift truck on a pallet.
It cannot be moved by hand.

UNPACKING

Please follow the security codes and ordinances of your country when unpacking the oven. Ensure that all parts have arrived intact and check for any damage caused during shipping.

Product Usage Instructions

INSTALLATION

1. Place the oven on a straight and sturdy ground to prevent any possibility of overturning.
2. Only professional technicians with installation and service licenses should handle the installation and service of the appliance.
3. The gas fitment connection must be done by an authorized person.
4. Ensure that the area where the oven is located has sufficient ventilation and a vent-hole.

SAFETY INSTRUCTIONS

Before installing the oven, read the operation and maintenance instructions carefully. Improper installation or part changing may damage the product or cause injury. Our company is not responsible for any intentional damage, negligence, or detriments resulting from disobeying instructions and regulations or wrong connections. Any unauthorized intervention will invalidate the warranty.

1. Keep this instruction manual in a safe place for future reference.
2. Installation should be done by a qualified service personnel in accordance with local ordinances and security rules.
3. Only trained personnel should operate the oven.
4. In case of malfunction or failure, immediately turn off the appliance and contact authorized service personnel for repairs using original spare parts.

OPERATION

• Instructions on how to operate the oven are not provided in the given text extract. Please refer to the complete user manual for detailed instructions on operating the oven.

CLEANING & MAINTENANCE

• Instructions on cleaning and maintenance are not provided in the given text extract. Please refer to the complete user manual for detailed instructions on cleaning and maintaining the oven.

TROUBLESHOOTING

• Instructions on troubleshooting are not provided in the given text extract. Please refer to the complete user manual for troubleshooting guidance.

INJECTOR CHANGE AND GAS SETTING

• Instructions on injector change and gas setting are not provided in the given text extract. Please refer to the complete user manual for detailed instructions on injector change and gas setting.

GAS CONNECTION IMAGES

• Instructions on gas connection images are not provided in the given text extract. Please refer to the complete user manual for gas connection images.

SPARE PART LIST- EXPLODING DRAWING

• Instructions on spare part list and exploding drawing are not provided in the given text extract. Please refer to the complete user manual for the spare part list and exploding drawing.

ELECTRIC CIRCUIT SCHEMA

• Instructions on the electric circuit schema are not provided in the given text extract. Please refer to the complete user manual for the electric circuit schema.

GENERAL INFORMATION

Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.These are not in our company’s responsibility to damage the appliance intentionally,negligence,detriments because of disobeying instructions and regulations,wrong connections.Unauthorized intervention to appliance invalidates the warranty.

1. This instruction manual should be kept in a safe place for future reference.
2. Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
3. This appliance has to be used by trained person.
4. Please turn off the appliance immediately in the event of malfunction or failure.The appliance should be repaired only by authorized service personnel.Please demand original spare part.

PRODUCT DESCRIPTION

The Professional Pizza Ovens (Gas) ,that provides high efficiency has been designed to be used in industrial kitchen.

Product Code| Dimensions (mm)| Weight (kg)| Packaging

Dimensions (mm)

---|---|---|---
STPOE930N| 148217201855| 700| 1790x1520x1880
SPOGE9N| 148217201855| 800| 1790x1520x1880
GPORE630| 1650x1705x1970| 865| 1670x1750x2170

TECHNICAL INFORMATION

INNER DIMENSIONS

(mm)

| 450| 450| 450

CAPACITY

| Ø300 * 9

pieces 130 pizza/h

| Ø300 * 6 ADET

130 pizza/h

| Ø300 * 6 pcs 75 pizza/h
GAS POWER (KW)| NG 28,7 / LPG

34,8

| 41,2| 41,2
ELECTRIC POWER

(KW)

| 2| 2| 2
OPERATING

VOLTAGE (V)

| 220| 220| 220
OPERATING

PRESSURE (mbar)

| 21| 21| 21
FEEDING CABLE| 32,5| 32,5| 3*2,5

TRANSPORTATION

• This appliance can not be moved by hand from area to area.It must be moved on pallet with Kasap

UNPACKING

• Please unpack the package according to the security codes and ordinances of current country and get rid from the pack.Parts which contacts with food are produced by stainless steel.All plastic parts are marked by material’s symbol.
• Please check that all the parts of appliance had come completely and if they are damaged or not during the shipping.

INSTALLATION

• Please place the product to straight and sturdy ground,please take necessary steps against possibility of overturn.
• Technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses by the company.
• Connection to Gas Fitment must be done by authorized person.
• The area where the appliance is must have enough ventilation and vent-hole.
• The appliance must be connected correctly according to local and national gas standards of your country.
• The appliance gas entrances are indicated with ‘’G’’ label on the body.
• This appliance must be connected to an earthed outlet in accordance with safety rules and standards.
• Appliance’s earthing must be connected to earthing line on panel which is nearest to electric installation.
• Connection to the main fuse and leak current fuse must be done in accordance with the current regulations.
• Connection to gas fitment must be done with suitable diameter metal flex pipe and spheric valve.The spheric valve must be immobilized to a place that is far away from heat and accessible during the danger.After gas entrance connection done,gas leakages must be checked.
• According to the datas on appliance information plate,gas and pressure must be adjusted.If the gas type that is adjusted is not the suitable with gas type that is at installation place,apply the instructions that is about adjustment of different gas type (Event :G)
• For easy cleaning and maintenance of the appliance.

SAFETY INSTRUCTIONS

• Do not use the appliance in insufficient lighted place.
• Do not touch the moving attachments while the appliance operates.
• Do not install the appliance in the presence of flammable or explosive materials.
• Do not operate the appliance when the machine is empty.
• Do not load so less or more than appliance’s capacity.
• Do not attempt to use the appliance without suitable protective equipments.
• Because of any reason if there is a fire or flame flare where the appliance is used,turn off all gas valves and electric contactor switch quickly and use fire extinguisher .Never use water to extinguish the fire.
• If there is gas leakage where the appliance is, .do not fire absolutely and do not use electric.
• Definitely do not allow to check the sealing with flame.
• The chimney hood must be installed to the oven as it covers over the oven completely.
• The chimney hood pipes can be used without fan till maximum 3 metres. If the chimney hood pipe distance is more than 3 metres,the fan must be used.

OPERATION

Control Panel:

CONTROL PANEL: SPOGE9N – GPORE630

A: UPPER ZONE SET TEMPERATURE

• It is the target temperature value for the upper oven zone. This value can be changed by clicking here.

B: UPPER ZONE INSTANT TEMPERATURE

• The oven top zone is the instantaneous temperature value.

C: OVEN OFF BUTTON

• Oven off button.

D: LOWER ZONE SET TEMPERATURE

• It is the target temperature value for the upper oven zone. This value can be changed by clicking here.

E: COOKING TIME

• The time countdown can be viewed here. Time can be adjusted by clicking here.

F: COOKING TIME START BUTTON

• Clicking this button starts the time countdown.

G: COOKING START / STOP

• The oven cooking system is started with this button.

H: RIGHT TURN BUTTON

• Click here for the turntable to rotate to the right.

I: TABLE STOP BUTTON

• Click here to stop the turntable.

J: LEFT TURN BUTTON

• Click for the turntable to rotate in the left direction.

K: ROTARY TABLE SPEED

• Click here to set the turntable speed.

L: FLAME LENGTH

• The intensity of the flame in the upper area of the furnace is adjusted here.

A: SET TEMPERATURE

• It is the target temperature value for the upper oven zone. This value can be changed by clicking here.

B: INSTANT TEMPERATURE

• The oven top zone is the instantaneous temperature value.

C: OVEN OFF BUTTON

• Oven off button.

D: COOKING START / STOP

• The oven cooking system is started with this button.

E: FLAME LENGTH

• The intensity of the flame in the upper area of the furnace is adjusted here.

F: COOKING TIME START BUTTON

• Clicking this button starts the time countdown.

G: COOKING TIME

• The time countdown can be viewed here. Time can be adjusted by clicking here.

CLEANING & MAINTENANCE

CLEANING AND MAINTENANCE AFTER EVERY USE

• Be sure that gas and electric connections are off before cleaning.
• Clean the inside of the oven with soft cloth by using oil solvent spray,before the appliance gets cooled exactly.
• Do not use abrasive cleaning chemicals as these can leave harmful residues.
• Do not use pressure water or vapor during the cleaning.
• Do not clean the appliance with the materials that may damage to chrome material.

PERIODIC CLEANING AND MAINTENANCE

• Maintenance should be done by qualified person.
• Get the periodic maintenance of the appliance once in every 15 days.
• Check the lighting lamp according to frequency of use.
• Check the cooking stones in periodic times.Change the broken and deformed stones.
• Check the gas connection hoses in periodic time.If there is slit,hole..etc,change the hoses.
• Ventilate the area where the appliance is in periodic times.

TROUBLESHOOTING

THE APPLIANCE DOESN’T OPERATE

| 1.       Check if the gas connection is done or not.

2.       If the hoses that have gas entrance lose gas due to slit,hole.etc.,the appliance is not operated.

3.       Check the electrical connections and voltage.

4.       Check if the fuse is on or off.

---|---
THE APPLIANCE

DOESN’T COOK WELL

| 1.       Check if it is operated at suitable gas setting or not.

2.       Check the heat settings.

---|---

THE APPLIANCE STOPPED

| 1.        When the oven operating temperature is more than maximum temperature,the oven will get STOP position automatically.

2.        When there is gas leakage,if there is solenoid gas stopper alarm in the area,gas flow is stopped and the appliance is not operated.Ventilate the area with air vent.

3.        Check the burner.

---|---
RESET BUTTON LIGHT DOESN’T SIGNAL| 1.       Check if the gas comes to the appliance.

2.       Check if the sparking plug contacts with body or not.

3.       Check if the sparking plug can fire or not.Lamp is not on.

---|---
LAMP IS NOT ON.| 1.     The lamp may be broken.Change it.
---|---

SPOGE9N – GPORE630

Regarding the connection between is malfunction.

| Connecting cable and Check the connections.
E02 – TC1 FAULT| UPPER thermocouple failure.| Thermocouple and Connection

Check it out..

E03 – TC2 FAULT| LOWER thermocouple failure.| Thermocouple and Connection

Check it out..

E06 – MEDIA SENSOR FAILURE| Measuring the ambient temperature there is a fault in

the sensor.

| Media on the card Check the sensor.
E07 – UPPER BURNER GAS

NO FAULT

| Gas failure in the upper burner.| Check the gas flow.
E08 – LOWER BURNER GAS

NO FAULT

| Gas failure in the lower burner.| Check the gas flow.
FAULT| EXPLANATION| NOTE
---|---|---
E01 – CONNECTION FAULT| Relay board with graphics card Regarding the connection

between is malfunction.

| Connecting cable and Check the connections.
E02 – TC1 FAULT| UPPER thermocouple failure.| Thermocouple and Connection

Check it out..

E06 – MEDIA SENSOR FAILURE| Measuring the ambient temperature there is a fault in

the sensor.

| Media on the card Check the sensor.
E07 – UPPER BURNER GAS

NO FAULT

| gas failure in the burner.| Check the gas flow.

• If cooking at pizza ovens (gas) is not done at suitable quality
• If any function of security doesn’t work
• Do not use the appliance.
• If these problems are still going on,contact with our authorized services.

INJECTOR CHANGE AND GAS SETTING

PIZZA OVENS (GAS ) BURNER-INJECTOR CHANGE CHART

Gas Group

| ****

Gas & Pressure

| SPOGE9N
---|---|---
Injector Æ

mm

2.Group

2H and 2E GROUP

| G20 – 21 mbar

BOTTOM and TOP BURNER

| NG Ø 2,50

LPG Ø 2,00

Change of the burner injector

1. The oven must be dispatched from the factory as it works
2. Increase the gas by turning yellow part on the gas block.If it is turned (-) direction,the gas is reduced. (Image 1)

GAS CONNECTION IMAGES

SPARE PART LIST-EXPLODING DRAWING

SPARE PART LIST-EXPLODING DRAWING

PRODUCT CODE:STPOE930N

NO| PRODUCT NAME| P.CODE
1| BASE FRAME| Y.STPOE930N.1001
2| BAKALITE HANDLE| Y.STPOE930N.1002
3| FRONT PANEL SHEETMETAL| Y.STPOE930N.1003
4| TERMINAL BLOCK| Y.STPOE930N.1004
5| SCREEN 7″| Y.STPOE930N.1005
6| SCREEN RELAY CARD| Y.STPOE930N.1006
7| THERMO PART| Y.STPOE930N.1007
8| FUSE 4 AMP| Y.STPOE930N.1008
9| SPARKING PLUG+CABLE| Y.STPOE930N.1009
10| FAN CONNECTION PART| Y.STPOE930N.1010
11| POWER SUPPLY| Y.STPOE930N.1011
12| FLEX HOSE 60 CM| Y.STPOE930N.1012
13| GAS BLOCK| Y.STPOE930N.1013
14| FIRING CARD| Y.STPOE930N.1014
15| BURNER| Y.STPOE930N.1015
16| CHIMNEY HOOD SHEETMETAL| Y.STPOE930N.1016
17| LAMP| Y.STPOE930N.1017
18| FRONT LID SHEETMETAL| Y.STPOE930N.1018
19| GRANIT| Y.STPOE930N.1019
20| TOP FIBER| Y.STPOE930N.1020
21| CHIMNEY FLANGE| Y.STPOE930N.1021
22| HELIX FAN| Y.STPOE930N.1022
23| FAN| Y.STPOE930N.1023
24| POTENTIOMETER| Y.STPOE930N.1024
25| BUTTON| Y.STPOE930N.1025
26| WARNING LIGHT| Y.STPOE930N.1026
27| TERMOSTAT EVCO| Y.STPOE930N.1027
28| BUTTON| Y.STPOE930N.1028

PRODUCT CODE: SPOGE9N

NO| PRODUCT NAME| P.CODE
1| BASE FRAME| Y.SPOGE9N.1001
2| REDUCER MOTOR| Y.SPOGE9N.1002
3| FRONT PANEL SHEETMETAL| Y.SPOGE9N.1003
4| REDUCER SHAFT| Y.SPOGE9N.1004
5| REDUCER PULLEY| Y.SPOGE9N.1005
6| BEARING BLOCK PULLEY| Y.SPOGE9N.1006
7| BELT 17X925| Y.SPOGE9N.1007
8| DRUM ADJUSTMENT SHAFT| Y.SPOGE9N.1008
9| BALL BEARING 6208| Y.SPOGE9N.1009
10| FLEX HOSE 60 CM| Y.SPOGE9N.1010
11| PIZZA STONE| Y.SPOGE9N.1011
12| —| Y.SPOGE9N.1012
13| GAS BLOCK| Y.SPOGE9N.1013
14| BOTTOM FIRING CARD| Y.SPOGE9N.1014
15| INNER BURNER| Y.SPOGE9N.1015
16| THERMO PART| Y.SPOGE9N.1016
17| LAMP| Y.SPOGE9N.1017
18| FRONT LID SHEETMETAL| Y.SPOGE9N.1018
19| GRANIT| Y.SPOGE9N.1019
20| BOTTOM BURNER| Y.SPOGE9N.1020
21| SPARKING PLUG+CABLE| Y.SPOGE9N.1021
22| SPEED CONTROL DEVICE| Y.SPOGE9N.1022
23| POWER SUPPLY| Y.SPOGE9N.1023
24| FUSE 4 AMP| Y.SPOGE9N.1024
25| TERMINAL BLOCK| Y.SPOGE9N.1025
26| —| Y.SPOGE9N.1026
27| FLEX HOSE 40 CM| Y.SPOGE9N.1027
28| DRUM CONNECTION RING| Y.SPOGE9N.1028
29| DRUM CONNECTION NUT| Y.SPOGE9N.1029
30| FAN| Y.SPOGE9N.1030
31| INNER FIRING CARD| Y.SPOGE9N.1031
32| FAN CONNECTION PART| Y.SPOGE9N.1032
33| FRONT LID HANDLE| Y.SPOGE9N.1033
34| HELIX FAN| Y.SPOGE9N.1034
35| CHIMNEY HOOD SHEETMETAL| Y.SPOGE9N.1035
36| CHIMNEY FLANGE| Y.SPOGE9N.1036
37| TOP FIBER| Y.SPOGE9N.1037
38| INJECTOR| Y.SPOGE9N.1038
39| POTENTIOMETER| Y.SPOGE9N.1039
40| BUTTON| Y.SPOGE9N.1040
41| WARNING LIGHT| Y.SPOGE9N.1041
42| EVCO THERMOSTAT| Y.SPOGE9N.1042
43| BUTTON| Y.SPOGE9N.1043

PRODUCT CODE : GPORE630|
---|---
NO| PRODUCT NAME| P.CODE
1| UPPER BODY| Y.GPORE630.001
2| PIZZA STONE| Y.GPORE630.002
3| CHASSIS| Y.GPORE630.003
4| WHEEL WITHOUT BRAKE| Y.GPORE630.004
5| DRUM ADJUSTMENT SHAFT| Y.GPORE630.005
6| ROLLER| Y.GPORE630.006
7| UPPER BEARING BEARING| Y.GPORE630.007
8| LOWER BEARING BEARING| Y.GPORE630.008
9| V PULLEY (17X180)| Y.GPORE630.009
10| V PULLEY (17X60)| Y.GPORE630.010
11| V BELT| Y.GPORE630.011
12| ENGINE| Y.GPORE630.012
13| BURNER| Y.GPORE630.013
14| INJECTOR KIT| Y.GPORE630.014
15| CHROME CONNECTED GAS FLEXI HOSE 60 CM 3/4| Y.GPORE630.015
16| GAS FLEXI HOSE WITH CHROME CONNECTION 40

CM 1/2

| Y.GPORE630.016
17| BURNER INLET ELBOW| Y.GPORE630.017
18| FRONT PANEL SHEET| Y.GPORE630.018
19| PANEL LABEL| Y.GPORE630.019
20| OVEN SIDE GLASS| Y.GPORE630.020
21| WOOD SIDE GLASS| Y.GPORE630.021
22| WOOD ENTRANCE COVER| Y.GPORE630.022
23| OVEN ENTRANCE DOOR| Y.GPORE630.023
24| LIGHTING LAMP| Y.GPORE630.024
25| BAKALITE HANDLE| Y.GPORE630.025
26| PEAR BUSH HANDLE| Y.GPORE630.026
27| GRANITE| Y.GPORE630.027
28| POTENTIOMETER| Y.GPORE630.028
29| ENCODER| Y.GPORE630.029
30| BUTTON| Y.GPORE630.030
31| WARNING LAMP| Y.GPORE630.031
32| DIGITAL THERMOSTAT| Y.GPORE630.032
33| PERMANENT GREEN LIGHT BUTTON| Y.GPORE630.033
34| INSTANT GREEN LIGHT BUTTON| Y.GPORE630.034
35| FAN| Y.GPORE630.035
36| MINIATURE RELAY SOCKET| Y.GPORE630.036
37| MINIATURE RELAY| Y.GPORE630.037
38| POWER SOURCE| Y.GPORE630.038
39| TERMINAL AVK4 GRAY| Y.GPORE630.039
40| TERMINAL AVK4 BLUE| Y.GPORE630.040
41| TERMINAL AVK4 RED| Y.GPORE630.041
42| TERMINAL AVK4 YELLOW-GREEN| Y.GPORE630.042
43| THERMO ELEMENT| Y.GPORE630.043
44| WET GRILL CASTING| Y.GPORE630.044
45| CHROME CONNECTED FLEXI GAS HOSE 60 CM 1/2| Y.GPORE630.045
46| IGNITION BRAIN| Y.GPORE630.046
47| GAS VALVE| Y.GPORE630.047

ELECTRIC CIRCUIT SCHEMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>