Shenzhen Sungi Technology M01 Wireless Bluetooth Mouse Instruction Manual
- June 6, 2024
- Shenzhen Sungi Technology
Table of Contents
**Shenzhen Sungi Technology M01 Wireless Bluetooth Mouse Instruction Manual
**
Product Description
- Bluetooth 4.0
- Operating frequency: 2.400GHz – 2.480GHz
- Effective range: up to 10 meters
- Rated working voltage: 3.7V (Rechargeable lithium battery). Battery capacity: 800maH
- Rated working current: 10mA (Sensor type: 3605). Charging current: 450MA, sleeping mode current: 50uA
- Movement Detection: Optical
- Transmission rate: 1Mbit/sec
- Modulation mode: GFSK
- Resolution: 800, 1200 (default), 1600 DPI
- RF power frequency: 3dB
- Working temperature: -40℃to +85℃
- Operating systems: Windows98, Windows ME, Windows NT, Windows XP, VISTA, WIN7, WIN8, Windows 10 and other systems.
- Compatible devices: notebook, desktop computer, tablet, Android smart phone.
Operating Instructions
- Pairing: When the mouse is powered on for 3 seconds, press the SID (pairing button) or the left button + middle button + right button to trigger the pairing mode. Once the blue light flashes, device is able to search for the mouse (Bluetooth Mouse 4.0).
- DPI mode: 800, 1200 (default), 1600. When press the DPI button, blue light flashes 1 time, 2 times, and 3 times and that represents respective DPI mode.
- When power voltage is lower than 3.3V, the blue light flashes slowly represent a low battery alarm. When the voltage is lower than 3.0V, the mouse stops working.
- USB mode is charging at 5V. Blue light is always on when charging, charging current: 450mA. The blue light is off when fully charged.
- 10 minutes of inactivity to enter deep sleep mode. During the sleeping mode, press a button to wake up the mouse.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.