Miele Triflex HX2 Cordless Vacuum Cleaner User Guide
- June 4, 2024
- Miele
Table of Contents
Miele Triflex HX2 Cordless Vacuum Cleaner
Instructions
We recommend using only genuine Miele accessories bearing the “ORIGINAL Miele” logo on the packaging. Only these will guarantee the optimum performance of your vacuum cleaner and the best possible cleaning results. Please note that faults and damage caused by use of accessories which do not bear the “ORIGINAL Miele” logo on the packaging are not covered by the vacuum cleaner warranty.
Cleaning the Electrobrush/handheld brush:
-
Disconnect the Electrobrush/handheld brush from the vacuum cleaner.
-
Place the Electrobrush/handheld brush upside down on a level, clean surface.
-
Cut any threads or hairs that have wound themselves around the roller brush with a pair of scissors. To guide the scissors, move along the guide track on the roller brush.
Then run the vacuum cleaner to vacuum up the cut threads and hairs. -
If the small running wheels are very heavily soiled or blocked, you can remove them for easier cleaning (not necessary in the case of the handheld brush). To remove them, use a flathead screwdriver.
(Not possible with the handheld brush)
You can take the roller brush out of the Electrobrush in order to remove
stubborn soiling and clean the inside of the Electrobrush.
- Unlock the cover on the side of the Electrobrush so that the
- Lift the cover up as far as it will go b.
- Remove the roller brush c.
- Remove the roller brush handle if you identify heavy soiling there d.
- Clean the roller brush and the roller brush handle and remove any stubborn soiling inside the Electrobrush.
- Reassemble the Electrobrush in reverse order.
Cleaning the pre-filter and fine dust filter
Clean both filters thoroughly at least once every 3 months.
(When cleaning them, it is essential to follow the steps in the order
described.)
- Remove the dust container.
- Empty the dust container over a bin.
- Turn the lid of the dust container beyond the stop until the arrow tips are aligned at the top a.
- Remove the pre-filter by pulling it upwards b.
- Twist the fine dust filter anti-clockwise by 10 180° turns. Use the recesses to help you.
You will hear an operating noise, which is a normal part of how the Comfort- Clean function works.
- Twist the fine dust filter clockwise. Use the recesses to help you.
- Remove the fine dust filter.
- Risk of damage caused by incorrect cleaning. The fine dust filter can become damaged and be less effective as a result. Do not clean the fine dust filter with water and avoid cleaning the inside. Do not use pointed or sharp-edged objects to clean the filter. Do not brush the fine dust filter.
- Hold the fine dust filter over a bin.
- Empty the fine dust filter by carefully tapping the rubberised lower edge.
- Turn the fine dust filter slightly while you do this to free the dirt from all of the crevices.
- Risk of damage caused by incorrect cleaning. The pre-filter can become damaged and be less effective as a result. Do not clean the pre-filter with water. Do not use pointed or sharp-edged objects to clean the filter.
- Clean the pre-filter with the dusting brush supplied or with a dry cloth.
- After cleaning the fine dust filter and pre-filter, reinsert the former into the latter by pressing the round cap on top of the fine dust filter down as far as it will go.
To continue achieving the best possible cleaning results, replace the fine
dust filter (HX FSF-2) with a new one after approx. 3 years.
For further maintenance steps, please refer to your Miele Triflex HX2
operating instructions (page 31) found within the box of your Triflex.