CTA PAD-SICCB Wireless Inductive Charging Case Security Lock Instruction Manual
- June 12, 2024
- CTA
Table of Contents
CTA PAD-SICCB Wireless Inductive Charging Case Security Lock
Caution: For proper results, please make sure your device is properly
aligned with the inductive charging plate
Caution: Please do not place or store the product on or near high-
temperature areas like heating devices, open flame, or in hot cars in extreme
heat.
Caution: Please do not place or store the product in or near water,
steam, or in any wet, humid, or damp places.
CONTENTS
Power Supply
- Input: AC 100-240V 50/60Hz
- Output: DC12V 1.5A
- Rating power: 18W
- Cable Length: 1.8M
- DC Plug: 5.5*2. 1mm male DC Plug
Inductive Charging Case
- Qi Standard: V1.2.4
- Input: DC12V 1.3A
- Output: DC5V 2.4A(Max.)
- Rating Power: 15W
- Efficiency: 80-85% (Max.)
- Inductive Distance: 3-6mm
INSTALLATION
Inserting Tablet into Enclosure
- Peel the external silicone sleeve from the internal hard case using component (F).
- To open case, apply gentle pressure to the small clips (noted on the diagram by arrows). The internal hard case will open when all four sides are unclipped.
- Insert the iPad into the back portion of the hard cover.
- Once the tablet device is inside, plug the charging cable into the power socket. Then place the internal front(hard) cover on top of the case, and gently clip all four sides shut.
- Tighten the anti-theft screw with the included star key (C) if you want the case security.
- Reinstall the external silicone rubber sleeve.
Reinstall the external silicone rubber sleeve.
- Locate kickstand at case (A) rear and fold out underneath strap.
- Display tablet at desired viewing angle.
- Press kickstand in to return to handheld mode.
Charging the Tablet Device
Using with kiosk stand (ADD-ICCSTAND)
- 4A. Place component (E) in the (4) outter holes in the back of the charging plate.
- 4B. Align VESA holes of the charging plate (B) and the stand, and rotate in (4) screws (D) using the included allen key (C) until securely tightened.
- 4C. Place the tablet device on top of the charging plate by aligning the magnets.
CONTACT
- 36 Taaffe Place Brooklyn, NY 11205
- support@ctadigital.com.
- 778-991-0169
- www.ctadigital.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>