SEALEY MK71 Alloy Wheel Painting or Repair Stand Instruction Manual
- June 12, 2024
- SEALEY
Table of Contents
SEALEY MK71 Alloy Wheel Painting or Repair Stand
Product Information
- Product Name: Alloy Wheel Painting/Repair Stand – 4 Wheel Capacity
- Model Number: MK71
- Manufacturer: Sealey
This product is manufactured to a high standard and is designed to provide years of trouble-free performance when used according to the instructions and properly maintained.
Product Usage Instructions
Safety
- Wear protective gloves and footwear when using the stand.
- Wear protective clothing to prevent any potential injuries.
- Only use the stand on firm, level, unobstructed surfaces capable of supporting the stand and wheel rims.
- Do not overload the stand.
- Always load the stand evenly to ensure maximum balance and stability.
- Apply the brakes before starting any work.
- Do not stand or ride on the stand, and do not allow others to do so.
- Replace or repair damaged parts using only recommended parts. Using unauthorized parts may be dangerous and will invalidate the warranty.
- Failure to comply with these instructions may result in loss of load, damage to the stand or other property, and/or personal injury.
Introduction
The Alloy Wheel Painting/Repair Stand – 4 Wheel Capacity (Model No: MK71) features fully adjustable supporting bars and cones for optimum height. The cones are angled for ease of use. The stand can hold four wheels and is supplied with 100mm PU wheels for easy movement around the workshop or spray booth. It is suitable for use on spray booth floors. The stand rotates the wheels on the cones, allowing each wheel to be painted completely.
Specification
- Model No: MK71
- Size (W x D x H): 1200 x 1200 x 1000mm
Assembly
Assemble the stand according to the parts diagram provided in the
instruction manual.
Environment Protection
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted and taken to a recycling center
for proper disposal. When the product becomes completely unserviceable and
requires disposal, drain any fluids (if applicable) into approved containers
and dispose of the product and fluids according to local regulations.
Note : It is the manufacturer’s policy to continually improve products,
and therefore data, specifications, and component parts may be altered without
prior notice.
Important: No liability is accepted for incorrect use of this product.
Warranty: The product is covered by a 12-month guarantee from the date of
purchase. Proof of purchase is required for any claims.
Contact Information:
- Sealey Group Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- Phone : 01284 757500
- Email: sales@sealey.co.uk
- Website : www.sealey.co.uk
Original Language Version: MK71 Issue 2 (H,F) 10/08/23
MODEL NO : MK71
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE
- Refer to instruction manual
- Wear protective gloves
- Wear protective clothing
- Wear protective footwear
SAFETY
- Only use on firm, level, unobstructed surfaces which are capable of supporting the stand and wheel rims.
- DO NOT overload.
- Always load the stand evenly to ensure maximum balance and stability.
- Apply the brakes before commencing work.
- DO NOT stand/ride on the stand, or allow others to do so.
- Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
- WARNING! Failure to comply with these instructions may result in loss of load, damage to the stand or other property and/or personal injury.
- WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
INTRODUCTION
Fully adjustable supporting bars and cones for optimum height. Cones are angled for ease of use. Holds four wheels. Supplied with 100mm PU wheels for moving the stand around the workshop or spr ay booth. Suitable for use on spray booth fl oors. Rotates the wheels on the cones so that each wheel can be painted completely.
SPECIFICATION
- Model No.: …………………………………………………..MK71
- Size (W x D x H): ………………….1200 x 1200 x 1000mm
ASSEMBLY
Assemble stand according to parts diagram.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations
Note : It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important : No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>