AXXESS BACKUPCAM-3 Camera Adapter Instruction Manual

: June 12, 2024
: AXXESS

Table of Contents

AXXESS BACKUPCAM-3 Camera Adapter
Product Information
Product Usage Instructions
INTRODUCTION
APPLICATIONS
Connections to be made
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AXXESS BACKUPCAM-3 Camera Adapter

AXXESS-BACKUPCAM-3-Camera-Adapter-PRODUCT

Product Information

The BACKUPCAM-3 is a product designed for GM Vehicles 2014-up. It allows the retention of the factory backup camera to be viewed through the display screen on an aftermarket radio or a stand-alone monitor. For more detailed information about the product and up-to-date vehicle specific applications, please visit AxxessInterfaces.com.

Product Usage Instructions

Compatible Vehicles

CHEVROLET Colorado
Cruze
Cruze Hatchback
Equinox
Impala
Malibu
Silverado 1500-LD
Silverado 1500
Silverado 2500/3500
Suburban
Tahoe

GMC Vehicles

Canyon
Sierra 1500-Limited
Sierra 1500
Sierra 2500/3500
Yukon
Yukon XL

Note: The vehicle must be running for the factory camera to power on.

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications

INTRODUCTION

The BACKUPCAM-3 is designed to retain the factory backup camera to be viewed through the display screen on the aftermarket radio, or a stand-alone monitor.

COMPONENTS

12-pin harness with a yellow RCA jack

APPLICATIONS

CHEVROLET

Colorado (†): 2015-up
Cruze (†): 2016-2018
Cruze Hatchback (†): 2016-2018
Equinox (†): 2018
Impala: 2014-up
Malibu (†): 2016-2018
Silverado: 1500-LD (†) 2019
Silverado: 1500 (†) 2014-2018
Silverado: 2500/3500 (†) 2015-up
Suburban: 2015-up
Tahoe: 2015-up

GMC

Canyon (†): 2015-2017
Sierra 1500-Limited (†): 2019
Sierra 1500 (†): 2014-2018
Sierra 2500/3500 (†): 2015-up
Yukon: 2015-up
Yukon XL: 2015-up

(†) With RPO code I05 or I06 radio

Note: The vehicle must be running for the factory camera to power on.

Connections to be made

From the 12-pin harness with a Yellow RCA jack

To the aftermarket radio:

Connect the Yellow RCA jack to the BACKUP CAMERA input.

To the vehicle:

Connect the female 12-pin harness with a Yellow RCA jack, to the male Gray harness removed from the Human Machine Interface module. (Figura A)

For the Chevy Colorado and GMC Canyon:

This module is located in the radio cavity, down low.

For all other models:

This module is located behind the glove box. There are (2) modules behind the glove box. This module is behind the metal dashboard support. (Figura B)
Drop the glove box down by first removing the retaining cable on the right side. Then squeeze the glove box sides and gently pull down.
Remove (6) T-15 Torx screws securing the plastic panel now exposed.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 1-800-253-TECH, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.