EnVisionLED RGB+W LED Smart Downlight User Guide

: July 4, 2024
: EnVisionLED

Table of Contents

ENVISION CONNECT
MODULE INSTRUCTIONS
SAFETY INSTRUCTIONS
WARNING
CAUTION
4″ Model
5/6″ Model
ADDING DIVICE
HOME
SCENE
MUSIC
SETTING
ALARAM SCHEDULE
CUSSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EnVisionLED RGB+W LED Smart Downlight

EnVisionLED RGB+W LED Smart Downlight

ENVISION CONNECT

Symbol

WWW.ENVISIONLEDLIGHTING.COM

MODULE INSTRUCTIONS

Module Instructions

SAFETY INSTRUCTIONS

Please read and understand all instructions before operate or install the product. Failure to do so may lead to electric shock, fire or other injuries that could be hazardous or even fatal.

Shut off the electricity to the wires that you are working on.
Do NOT open, no user serviceable parts inside. Any changes or modifications and applications not expressly approved by the manufacturer could void the user’s authority to operate the equipment and warranty.

WARNING

Risk of fire or electric shock.
LED retrofit kit installation requires knowledge of luminaires electrical systems. Do NOT attempt installation if not qualified. Contact a qualified electrician.
Install this kit only in the luminaires that have the construction teatures and dimensions shown in the photographs and/or drawings.
Do NOT exceed the input rating of the luminaire.
Do NOT make or alter any open holes in an enclosure of wiring or electrical components during installation.
To prevent wiring damage or abrasion, do NOT expose wiring to edges of sheet metal or other sharp objects.
This device is not intended for use with emergency exits.
This Luminaire has been modified to operate LED lamp. Do NOT attempt to install or operate incandescent lamps or CFL in this luminaire.
Suitable for TYPE IC or TYPE NON-C luminaires.
This retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be determined by authorities having jurisdiction.

CAUTION

Connect fixture to a 120 Volt, 60Hz power source only. Any other connection void the warranty.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interterence by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.