HOOVER STREAMLINE Hard Floor Cleaner User Guide
- June 10, 2024
- Hoover
Table of Contents
HOOVER STREAMLINE Hard Floor Cleaner
StreamlineTM Hard Floor Cleaner
Product Information
The StreamlineTM Hard Floor Cleaner is a cleaning device designed to clean hard floors. It comes with a handle, main unit, solution tank, and self-clean function. The device dispenses water and Hoover Solution to clean floors. It also has a BOOST mode for stubborn messes.
Product Usage Instructions
Easy Assembly
- Insert handle into main unit. You will hear a click when inserted properly.
Filling the Tank
- Remove solution tank from your product by pressing RELEASE latch.
- First, open the flap and fill with water to the WATER line. Next, fill Hoover Solution to SOLUTION fill line.
- Close the flap and reinsert tank until it clicks into place.
How to Use
- Locate and push the power button on the handle to start your machine.
- Move the device slowly back and forth across the hard floor. Water is dispensed using the click of the trigger.
- For stubborn messes switch to BOOST mode using the + button on the handle.
How to Use Self-Clean
- Make sure the Clean Water tank is at least half full.
- Place your Streamline on the tray and press the Self-Clean button.
- The unit will start a 90 second self-clean cycle. Do not remove from tray until cycle is complete.
Buy Hoover Solution today using the product code: 961003600-R0.
EASY ASSEMBLY
- Insert handle into main unit. You will hear a click when inserted properly.
FILLING THE TANK
- Remove solution tank from your product by pressing RELEASE latch.
- First, open the flap and fill with water to the WATER line. Next, fill Hoover Solution to SOLUTION fill line.
- Close the flap and reinsert tank until it clicks into place.
HOW TO USE
- Locate and push the power button on the handle to start your machine.
- Move the device slowly back and forth across the hard floor. Water is dispensed using the click of the trigger.
- For stubborn messes switch to BOOST mode using the + button on the handle.
HOW TO USE SELF-CLEAN
- Make sure the Clean Water tank is at least half full.
- Place your Streamline on the tray and press the Self-Clean button.
- The unit will start a 90 second self-clean cycle. Do not remove from tray until cycle is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>