KOHLER K-27142-CR Elongated Bidet Toilet Seat User Guide
- June 9, 2024
- Kohler
Table of Contents
C³®-430
Elongated bidet toilet seat
K-27142-CR
Features
- Hybrid heater provides continuously heated water for consistent comfort.
- Self-cleaning function uses UV light to automatically clean the wand surfaces.
- Sleek, handheld remote control with two programmable user presets.
- LED lighting illuminates the bowl to serve as a nightlight.
- Heated seat with adjustable temperature settings.
- Front and rear wash modes provide warm water for cleansing.
- Adjustable water temperature and water pressure.
- Quiet-Close™ elongated seat closes quietly.
- Quick-Release™ functionality allows seat to be removed easily from toilet for convenient cleaning.
Material
- Plastic construction.
Installation
- Requires connection to toilet water supply line. All hoses and connections are included.
Recommended Products/Accessories
K-3814 Two-piece elongated 1.28 gpf chair height toilet
K-3814-RA Two-piece elongated 1.28 gpf chair height toilet
K-5172 One-piece compact elongated 1.28 gpf toilet
K-5172-RA One-piece compact elongated 1.28 gpf toilet
K-3551 Two-piece elongated chair height toilet
K-3619 One-piece elongated 1.28 gpf chair height toilet
K-3619-RA One-piece elongated 1.28 gpf chair height toilet
Included Components
Additional Components: Inlet water supply hose Seat mounting bracket
T-fitting
Codes/Standards
ASME A112.4.2/CSA B45.16
UL 1431
CSA C22.2 No. 64
CSA C22.2 No. 68
KOHLER® Intelligent Toilet and C3® Cleansing Seat Three-Year Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
| Color | Code | Description |
|---|---|---|
| 0 | White | |
| 96 | Biscuit |
Required Electrical Service
One dedicated circuit required, protected with Class A GroundFault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
Bidet toilet seat: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
| Seat shape type: | Elongated |
|---|---|
| Seat front type: | Closed-front |
| Seat-mounting holes: | 5-1/2″ (140 mm) |
| Electrical component rating: | Bidet toilet seat: 120 V, 15 A, 60 Hz, 1800 W |
| Power cord length: | 43″ (1092 mm) |
Notes
Install this product according to the installation instructions.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi 80 psi (139 kPa – 551 kPa).
Do not install this seat in a location where:
- water might be splashed on the product or
- excessive moisture, high humidity levels, or condensation is present. This will avoid damage to the electronic components.
CAUTION: Risk of property damage. A single extension cord may be used
provided the cord
ªTypeº begins with ªSJº, 12 gauge, grounded (12/3), no longer than 25 feet,
and plugged into a GFCI outlet. Promptly replace any extension cord that
exhibits any sign of damage.
To avoid possible product malfunction, do not plug in the seat until
instructed to do so.
Locate the recepticle at least 6″ (152 mm) above the floor, and within a 32″
(813 mm) radius measured 2″ (51 mm) from the bowl ledge.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
3-16-2022 04:52 – US/CA