TESLA TSL-BT-PHD Professional BLDC Neutralizing Ion Hairdryer User Manual
- June 12, 2024
- Tesla
Table of Contents
TESLA PROFESSIONAL BLDC
NEUTRALIZING ION HAIRDRYER
USER MANUAL
SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS BEFORE USING
- KEEP AWAY FROM WATER
DANGER: As with most electrical appliances, electric parts are
electrically live when switch off.
To reduce the risk of injury or death by electric shock:
WARNING: Do not use this appliance near bathtubs, showers, basins or
other vessels containing water. Do not use appliance while bathing.
To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or submerged in water.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and similar.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
- Burn hazard. Keep appliance out of reach from young children, particularly during use and while cooling down.
PART NAMES
ATTACHMENTS
SPECIFICATION
Product: HAIR DRYER
Model: TSL-BT-PHD
Power supply: AC 220-240V, 50-60 Hz
Rated power: 1500 W
Maximum motor speed: 110,000 rpm
Weight: about 678 g
Cord Length: about 2.8 m
INSTRUCTION FOR USE
-
Power on
The power plug needs to be fully inserted into the socket.
Push the switch to the “ON” position to start working.
(When switched on for the first time, the hair dryer will blow air at the minimum temperature and intensity, the first LED on the left side of the two buttons will light up). -
Airflow control
The hair dryer is set to 3 levels of wind speed, press the airflow control button once to change one level, and the corresponding white LED will light up. -
Temperature control
The hair dryer is set to 3 levels of temperature, press the temperature control button to change one level, the corresponding white LED will light up. Press the cold shot button once to switch the cold air directly, press it again to restore the hot air. -
Memory function
The hair dryer has a memorization function that allows preserving the temperature selected for previous use. The function allows establishing the temperature and the air flow speed ideal for your need and hair type, guaranteeing a practical and efficient use. -
Auto-cleaning function
This hair dryer features an auto-cleaning function to clean it‘s inner components. Once the hair dryer is on, long press the temperature/airflow reducing button, the motor will be started to reverse and automatically clean. During this process, press any button to restore or automatically restore after 15 seconds. Reinstall the accessories for normal use.
Cleaning and maintenance
Before cleaning the appliance, unplug it from the power outlet and wait until
it cools off.
Periodically remove dust and hair from the unit.
To remove the rear cover filter, hold the body of hair dryer and turn the rear
cover counterclockwise.
Attention:
Do not disassemble the stainless steel filter inside, otherwise it may cause
injury.
Use a towel or sponge to clean the filter parts.
Please make sure all parts are completely dry before reinstalling the rear
cover.
Storage
Hold the hair dryer body, and then hold the handle to rotate clockwise.
Rotate 180 degrees clockwise.
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-BT-PHD is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc
TESLA PROFESSIONAL BLDC
NEUTRALIZING ION HAIRDRYER
Manufacturer
Tesla Global Limited
Far East Consortium Building,
121 Des Voeux Road Central
Hong Kong
www.teslasmart.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>