GGM Gastro VHCOZ 20 20 Lt.&30 Lt Cutter Electrical Industrial Type User Manual
- June 12, 2024
- ggm gastro
Table of Contents
GGM Gastro VHCOZ 20 20 Lt.&30 Lt Cutter Electrical Industrial Type
Product Information
Manufacture r: GGM Gastro International GmbH
Website: www.ggmgastro.com
Email: technik@ggmgastro.com
Published on: 22.08.2019
Product Usage Instructions
Caution
The power network of the building, facility or any similar site, where this
device will be connected to power supply, should comply with INDOOR ELECTRICAL
INSTALLATION regulation all necessary action should be taken in order to
maintain personal and material safety when connecting this device to power
supply. OTHERWISE OUR COMPANY WILL NOT BE RESPONSIBLE FOR THE CONSEQUENCES.
Introduction
Thank you for purchasing our appliance and for your reliance upon our
company. Our appliances are used in professional kitchens in 100 countries.
Our appliances are produced in compliance with international standards.
Important notice: Please read and ensure that the users read this user’s
manual in order to achieve the desired performance in line with your
expectations and to use your appliance for long years. Please take the
warnings mentioned above into consideration before calling for service…
The manual containing information about installation, usage and maintenance of our product you purchased should be read carefully. Please ensure that power supply connections to the appliance are already installed by qualified personnel according to local legislation, before our authorized service personnel arrives for the installation of the appliance.
If you are confused or you don’t have enough information please get in touch with authorized service by phone. Please keep in mind that, if the service personnel is delayed at your site, related expenses and delay costs will be charged to you on hourly basis.
Technical Data
Product Type| Main Dimensions (mm)| Total Electrical Input (kW)| Power Supply
Voltage| Operational Capacity (KG/Batch)| Working Frequency (Hz)| Supply
Cable| Maximum Noise (dBA)| Maximum Slope| Protection Class| Bowl Capacity
(lt)| Material| Net Weight (Kg)
---|---|---|---|---|---|---|---|---|---|---|---|---
VHCOZ 20 (Mono phase)| 480x700x1070| 2.2| 220-240 V| 68| 50/60 Hz| N/A| N/A|
N/A| Class B| N/A| Stainless Steel| N/A
VHCOZ 30 (Three phase)| 480x740x1070| 3| 380-400 V| 75| 50/60 Hz| N/A| N/A|
N/A| Class B| N/A| Stainless Steel| N/A
Electrical Circuit Diagram
VHCOZ 20 : [Electrical Circuit Diagram Image] VHCOZ 30 : [Electrical Circuit Diagram Image]
Main Dimensions
VHCOZ 20 : 480x700x1070 mm
VHCOZ 30: 480x740x1070 mm
Warning Signs
- POWER NETWORK GROUNDING
- GROUNDING
- POWER SUPPLY CONNECTIONS
- Voltage: 220-240 V, Supply Connection: 1 Phase
- Voltage: 380-400 V, Supply Connection: 3 Phase
Safety Details
Do not clean up the device with pressure water. This device should be
installed in line with effective regulations and only be operated in well-
ventilated places. Please refer to the instructions before installing and
operating the device.
INTRODUCTION
Dear User,
Thank you for purchasing our appliance and for your reliance upon our company.
Our appliances are used in professional kitchens in 100 countries. Our
appliances are produced in compliance with international standards. Important
notice: Please read and ensure that the users read this user’s manual in order
to achieve the desired performance in line with your expectations and to use
your appliance for long years. Please take the warnings mentioned above into
consideration before calling for service…
Please read and ensure that your operation personnel also reads this user’s
manual care fully before installing and using the appliance. If the appliance
is operated without reading the user’s manual, the appliance will not be
covered by the warranty.
The manual containing information about installation, usage and maintenance of
our product you purchased should be read carefully. Please ensure that power
supply connections to the appliance are already installed by qualified
personnel according to local legislation, before our authorized service
personnel arrives for the installation of the appliance.
If you are confused or you don’t have enough information
please get in touch with authorized service by phone.
Please keep in mind that, if the service personnel is delayed
at your site, related expenses and delay costs will be charged to you on
hourly basis.
We hope that you will get the best performance from our product…
TECHNICAL DATA
YOUR PRODUCT’S TYPE| | VHCOZ 20
(Mono phase)| VHCOZ 30
(Three phase)|
---|---|---|---|---
MAIN DIMENSIONS (mm)| | 480x700x1070| 480x740x1070|
TOTAL ELECTRICAL INPUT (kW)| | 2,2| 3|
POWER SUPPLY VOLTAGE| | 220-240| 380-400|
OPERATIONAL CAPACITY (KG/BATCH)| | 8-15| 18-25|
WORKING FREQUENCY (Hz)| | 50/60| 50/60|
SUPPLY CABLE| | 3×2,5| 5×2,5|
MAXIMUM NOISE (dBA)| | 77| 77|
MAXIMUM SLOPE| | 5°| 5°|
PROTECTION CLASS| | 1| 1|
CLASS| | IP21| IP21|
BOWL CAPACITY (lt)| | 20| 30|
MATERIAL| | STAINLESS STEEL| STAINLESS STEEL|
NET WEIGHT (Kg)| | 68| 75|
ELECTRICAL CIRCUIT DIAGRAM
VHCOZ 20
VHCOZ 30
CONTROL
BOARDS MAIN DIMENSIONS
VHCOZ 20 480x700x1070
VHCOZ 30 480x740x1070
WARNING SIGNS
POWER NETWORK GROUNDING
GROUNDING
POWER
POWER SUPPLY CONNECTIONS
- 220-240 V NPE / 50/60 Hz VOLTAGE : 220-240 V
- SUPPLY CONNECTION: 1 PHASE
- 380-400 V 3NPE / 50/60 Hz VOLTAGE :380-400 V
- SUPPLY CONNECTION: 3 PHASE
SAFETY DETAILS
Do not clean up the device with pressure water
This device should be installed in line with effective regulations and only be
operated in well ventilated places. Please refer to the instructions before
installing and operating the device.
This device is designed for industrial use and should only be operated by
personnel trained on the device.
The device should not be handled by unauthorized persons except for the
manufacturer or authorized service.
In case of fire or flame in the area where the device is operated, act without
panic, close gas valves (if any) , turn off the power switches and use a fire
extinguisher. Never use water to extinguish the fire.
TRANSPORTING AND MOVING
CHANGING THE LOCATION
Machines installed by an authorized service CANNOT BE MOVED ELSEWHERE, ITS
POWER SUPPLY CABLES CANNOT BE EXTENDED OR REPLACED except
by an authorized service.
- Disconnect from power supply before moving
- The vehicle can be moved with supplementary vehicles like fork lift.
- The device should be placed on a palette by manpower.
- If the transported distance is far, the machine should be moved slowly and the device should be fixed on palette or supported in order to prevent jolt.
- Do not hit or drop the device when moving.
INSTALLATION OF THE APPLIANCE
Installation of the device should be carried out by authorized service
personnel.
- Power supply connection of the device should be checked by an eligible electrician, and it should be connected to a fuse at a maximum height of 170 cm.
- Power supply connection should be made using a 30 mA current leakage fuse as a protection against current leakage danger.
- Power installation to be used should be grounded by connecting it to a grounding bar at the nearest panel. Relevant fuse values to be used according to device power are given in Technical Data section
- Bowl should be placed correctly(1) and locked by turning around(2) its axis shown in the picture.
- After ensured about bowl placed correctly, blades should be placed(3) to shaft shown as above picture.
CONTROL PANEL
After ensured about bowl and blades placed correctly, top cover should be
placed and locked to shaft shown in the picture.
- A: START BUTTON
- B: SPEED CONTROL
- C : STOP BUTTON
OPERATION OF THE APPLIANCE
- Cutter machine is used for cutting of onion, tomato, pepper,.etc. vegetables without leaving the juice and not allowing them to crush. Because of the cutter, some mixtures can be prepared properly.
- After placing the machine to the operation area with its package, and then open its package.
- Before first use, machine should be cleaned thoroughly together with its outer surface and internal boiler with a liquid cleaning material and rinsed with plenty of water.
- Because of the safety, connect the machine to a grounded socket.
- During the operation, hardness material should be awared from the bowl.
- Motor safety cover plate placed under the machine should not be opened, do not change the parameters of motor driver, do not repair motor,belt etc by non-authorized persons.
- It should be ensured the bowl is placed to the machine properly.
- After pressed start button, 8 staged speed switch should be increased slightly up to necessary speed.
- During the operation, bowl cover should not be opened.
- Keep the control panel beware of water.
- When the cutting operation is completed properly, machine is stopped by pressing the stop button.
- Blades of cutter should be checked periodically and in case of low cutting performance with blades, blades should be replaced with the new ones.
- Do not use abrasive or such harsh chemicals in the cleaning of the machine.
- In case of any damage caused by user’s fault will not be covered in warranty.
- Blades given with the cutter machine should be stored in safety regions.
- Before using bowl drain arm, blades must be taken from bowl. This prevents any
CAUTION
NEVER ENTER YOUR HAND IN TO THE BOWL UNLESS THE BLADES ARE NOT STOPPED.
CAUTION
NEVER OPERATE YOUR DEVICE WITHOUT GROUND CONNECTION.
NOTE: Do not use except purpose of use. The device should be operated by qualified personnel knowing safety terms and technical specifications and who has read the instruction manual.
It is recommended to operate the device between temperatures of -5ºC +40ºC and in ambient humidity of maximum 65%.
OPERATION OF THE APPLIANCE
CAUTION! : The device should be installed and operated as described in
this user’s manual. If any failure is encountered please contact our nearest
authorized service dealer.
WHEN THE DEVICE HAS A FAILURE ONLY AUTHORIZED ………….. SERVICE DEALERS ARE
ALLOWED TO HANDLE THE DEVICE. IF ANY PERSON OTHER THAN ONLY AUTHORIZED
SERVICE DEALERS HANDLE THE DEVICE, IT WILL NOT BE COVERED BY THE WARRANTY.
NEVER ALLOW PEOPLE WHO ARE NOT AUTHORIZED TO HANDLE THE DEVICE. OTHERWISE
PRODUCER COMPANY WILL NOT BE RESPONSIBLE FOR THE CONSEQUENCES. DURING
MAINTENANCE SERVICE OUR AUTHORIZED SERVICE DEALERS SHOULD NOT BE PROPOSED TO
USE NON-ORIGINAL SPARE PARTS FOR WHATSOEVER. INSTALLING ANY NON-ORIGINAL SPARE
PART TO THE DEVICE LEAVES THE DEVICE
OUT OF WARRANTY COVERAGE. CLEAN-UP AND MAINTENANCE
-
CLEAN-UP : Turn the device off after daily use. Wipe the outer surface of the mixing apparatus and container with a sponge and liquid detergent. Top hood may be opened, to remove the peeler disc and to discharge rests left inside the vessel with help of water.
After clean-up with sponge and liquid detergent mixing apparatus and container should be rinsed thoroughly with plenty of water.
Do not use CHEMICAL CLEANING AGENTS like hydrochloric acid and abrasive materials during cleaning. -
CLEAN-UP :
Periodic maintenance should be carried out by a technician. It is recommended to carry out maintenance at least every 6 months, depending on the frequency of use. Periodic maintenance conducted by authorized service personnel of ours is charged, even the guarantee period has not expired.
LIFE OF USE
Devices life of use is 10 year if it is used under recommended conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>