tracer Magnus PRO TWS Bluetooth Black Instruction Manual

tracer Magnus PRO TWS Bluetooth Black

To ensure correct operation and avoid damage, please read this user manual carefully before using this product.

Points for attention

• Do not hit or crush it seriously.
• Do not contact benzene, diluent and other chemicals.
• Do not use near by strong magnetic field or electric field.
• Avoid direct rays or heating appliances.
• Do not disassemble, repair or modify.
• Do not listen at large volume for long periods of time, so as not to injure the hearing.
• Do not clean the speaker with water and don’t immerse the speaker in the water. This speaker only has water pray prevention function. If use the speaker not by the right way and cause any quality problems, not support warranty. Kindly note above!. Please clean the speaker with a slightly damp cloth.
• When using cycling, driving a car or motorcycle, Please don’t stand in the rain for a long time.
• When using at low voltage, it may cause distortion of sound and please charge it in time.
• Bluetooth is compatible with common smart phones and tablets, but depending on the device or application you use, may not be able to support a particular feature

Features

• 2.2CH Superb Portable Outdoor Boombox
• Amazing Sound all around and Punchy Bass beating
• Excellent Build Quality with hard strong handle
• Three modes of RGB light activity makes perfect for disco party
• IPX6 Water Resistance, perfect for the beach, poolside and boating
• Google Assistant and Siri voice control optimized
• Multiple Link Function, multiple links of unlimited numbers achieving enhanced sound
• USB port compliance with power bank and USB disk playing function
• Dedicated with Hands-free Mic for easy picking up the call
• Line-in function, suitable for PC, MID, TV and other audio devices

Specifications

• Bluetooth version: V5.3
• Tweeter Size: 1.5 inch*2, 4Ω
• Subwoofer Size: 3 inch*2, 4Ω
• RMS power output: Tweeter 10W2+Subwoofer 20W2= 60W in total
• Battery Capacity: 7.4V, 5400mAh
• Play time: up to 12 hours
• Frequency Response: 80HZ-20KHZ
• Bluetooth connecting range: 15m
• Product size: 377(L)157(W)180(H)MM
• Maximum Transmitter Power (E.I.R.P) ≤20 dBm
• The range of which the device operates: 2400 MHz – 2483,5 MHz

Package Contents

• 1xPortable Bluetooth Speaker
• 1xType-C Charging cable
• 1xAudio cable
• 1xUser manual

Product Details

1. Backward/Volume Down
2. Forward/Volume Up
3. RGB Light
4. Built-in Mic Hole
5. Power On/Off
6. Multiple Link Button
7. Play/Pause
8. Mode Button (turn among Bluetooth, USB disk and AUX-IN)
9. AUX socket
10. Reset Jack
11. Type-C Charging Jack
12. USB socket/Power bank socket

Power On/Off

Long-press the Power button to turn the speaker on and off.

Bluetooth

• Turn the power button to “ON”. The speaker enter Bluetooth mode automatically.
• Activate Bluetooth of mobile phone and search for device name Tracer Magnus Pro then connect it.
• Play the music from your mobile phone and enjoy.
• Long-press Forward or Backward button to select songs.
• Short-press Forward or Backward button to adjust volume up and down.
• Short-press Play/Pause button to play/pause the music.
• Long-press “Multiple Link” Button to disconnect the Bluetooth connection with the mobile device.

Note: If your smartphone is disconnected from speaker due to shutdown or switching mode, the speaker will automatically reconnect your smartphone when it is turned on again or switched  back to Bluetooth mode.

Multiple Link Function

Prepare all speakers (Infinite quantity but they must be same BT paring name) you need to connect by Multiple Link, choose 1pc as master speaker and follow below steps.

Steps| Operation/Status| Power indicator| Multiple Link indicator
---|---|---|---
(White LED)| (White LED)
1| Master Speaker| Turn on and connect to external devices (connected to smartphone /USB player / AUX player).
Short-Press ‚’Multiple Link’’ button to make it ready for Multiple Link connection of Slave Speakers.| Master Speaker| Lighting constantly| Master Speaker| Lighting constantly
2| Slave Speakers (Infinite quantity)| Turn on and make it in BT disconnected state.

Short-Press ‚’Multiple Link’’ button to se- arch Master Speaker, it will automatically start to get connected by Multiple Link.

| Slave Speaker| Blink slowly| Slave Speaker| Lighting constantly if Slave Speaker connected successfully.
Slave Speakers| Blink slowly| Slave Speakers| Light off if if Slave Speaker fail to connect in one minute.
3| Master Speaker| Short-Press ‚’Multiple Link’’ button to exit the Multiple Link state.| Master Speaker| Blink slowly(but if it was still connected to your smart- phone, then indicator would light constantly.)| Master Speaker| Light off
Slave Speakers| Blink slowly| Slave Speakers| Blink slowly (searching status),

then light off if fail to connect to master speaker in one minute.

4| Slave Speakers| Short-Press ‚’Multiple Link’’ button to exit the Multiple Link state.| Master Speaker| Lighting constantly| Master Speaker| Lighting constantly
Slave Speakers| Blink slowly| Slave Speakers| Light off

Playing music from USB disk

• Turn the Power button to “ON”.
• Insert USB flash disk into USB socket, the speaker will play the stored music automatically.
• Long-press Forward or Backward button to select songs you like, short-press to adjust the volume up and down.
• Short-press Play/Pause to play or pause.

Note: Under any playing mode, when you insert a USB disk to the speaker, it will switch to play the USB disk.

Power Bank Function

• Turn the speaker on.
• Connect other device to the 5V 1A out port via a charging cable.

Tracer Magnus PRO TWS

AUX-IN:

• For other compatible music devices, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device, then enjoy…
• Under any playing mode, when you use the audio cable to connect the device, it will auto-switch to the AUX mode.
• When using an external device, all functions can be controlled by the external device.

EQ Introduction:

This unit offers 2 kinds of sound effects, long-press Mode button to change the EQ modes.

RGB Light

The RGB light is on when speaker powered on, user can short-press the RGB Light button to turn the three different light modes and turn it off.

Activating Voice Assistant:

• Make Bluetooth connection with your mobile phone.
• Long-press Play/Pause button to activate voice assistant.

Hands-free call:

• Under Bluetooth connection status, if there is an incoming call, user can short-press Play/Pause button to accept the call or long-press Play/Pause button to reject the call.
• During the call, user can long-press Play/Pause button to switch to talking on the phone.
• Short-press Play/Pause button or operate on mobile phone to end the call.

Reset Functionality:

If the speaker does not turn off or respond, user can short-press the Reset Jack with a small round pin to reset the speaker.

More Remarks:

• Default volume is at 50% status of max volume.
• Play time may vary depending on volume level and music style.

How to charge:

• The charger is not included in the package, please charge this speaker via a rated 5V/2A charger or via a PC. Fast charger (rated 9V/2A) is supported as well.
• When battery voltage low, the speaker will make prompt sound, Power LED indicator will turn red and blink. Please Recharge In Time.
• Charge time should be 4-6 hours. Once the speaker is full charged, the red Power LED indicator will switch off.
• To protect the battery, please do not use the speaker while it is charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>