boAt Immortal 101 True Wireless Gaming Earbuds Instruction Manual
- June 12, 2024
- Boat
Table of Contents
- PACKAGE CONTAINS
- CONNECTION MODE
- SINGLE EARBUD USAGE
- QUICK GUIDE ON FUNCTIONALITIES
- CHARGING THE EARBUDS
- CHARGING THE CASE
- BASIC FUNCTIONS
- VOICE ASSISTANT
- BEAST MODE
- ENXT TECH
- SMART POWER OFF
- MANUAL POWER OFF
- FACTORY RESET
- Specification
- WARNING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**boAt Immortal 101 True Wireless Gaming Earbuds Instruction Manual
**
Get ready to immerse yourself in musical bliss with your very own pair of boAt
Immortal 101. Please consider this manual as your guiding map towards the
unparalleled shores of musical bliss. Knowl- edge of Bluetooth and device
connectivity is essential for steering this boat and therefore we strongly
recommend thorough reading of this manual. Also, you may refer to the same at
times when you face any sort of difficulty
PACKAGE CONTAINS
- 1x Pair of TWS Earbuds
- 1x Charging Case
- 1x Type-C Charging Cable
- 2x Pairs of Extra Earmuffs
- 1x User Manual
- 1x Warranty Card
- 1x Catalogue
- 1x FAQ Card
POWER ON (FIRST TIME USER)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of
the charging case (when earbuds are inside). Courtesy our IWP™ (Insta Wake N’
Pair) technology, the earbuds power on automatically, get connected and enter
the connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 secs to
manually power on the earbuds. Step 2: After powering on, the earbuds enter
the Connection Mode. indicated by alternate red and blue LED flashes
CONNECTION MODE
Step 3: Turn on the Bluetooth functionality on your phone/media device &
scan
Step 4: Search for ‘Immortal 101’ and pair accordingly, Congratulations!
Your earbuds are now connected successfully via Bluetooth.
Note:
- Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
- Immortal 101 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.
SINGLE EARBUD USAGE
Bluetooth Bluetooth ON Device Immortal 101
Step 1: Please note that both the earbuds can be used in mono mode. Use
Smart/Manual Power On for switching on the desired earbud
Step 2: The selected earbud automatically enters the connection mode
indicated by LED flashes
Step 3: Turn on Bluetooth on your phone/media device and search for
‘Immortal 101’ to connect
Notes:
- To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
- You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode
QUICK GUIDE ON FUNCTIONALITIES
3 Seconds
Long touch loft CTC for 3 sec to activate voice assistant
3 Seconds
Long touch both CTCs for 3 seconds to manually power on 5 Seconds Long touch
both CTCs separately for
5 seconds to manually power off.
5 Seconds Long touch both CTCs for 5 seconds to perform factory reset
CHARGING THE EARBUDS
Step 1:
Please insert the earbuds back inside the case in correct orientation and
close the lid. (The LED on the earbuds and case LED will blink 3 times, Which
indicates its in charging state)
Step 2:
Once the earbuds get fully charged, the earbuds LED will automatically power
off.
Note:
- Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.
CHARGING THE CASE
Step:
To charge the case, plug one end of the provided cable into the case and
connect the other end to a computer/ wall adapter/ powerbank, etc. While the
case is on charging, the LED will be in breathing mode. When the case gets
fully charged, the charging case automatically switches off.
BASIC FUNCTIONS
- Voice Assistant: Long touch the left CTC for 3 seconds to activate default voice assistant
- Answer: Single tap CTC on either earbud to answer an incoming call
- Hang Up / Reject Call. Double tap the CTC on either earbud to end / reject call
- Play/Pause Music: Single tap either earbud’s CTC to play or pause music
- Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
- Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song
Note:
Volume can only be controlled via the media device
VOICE ASSISTANT
Step 1: Long touch the CTC on left earbud for 3 seconds to activate
default smart voice assistant
Step 2: The respective voice assistant screen pops up and you may place
your commands at ease
Tips: You may try out the following commands.
Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.
BEAST MODE
Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST” Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Mode.
Made for the Gamers – By Gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience
ENXT TECH
Our ENX (Environmental Noise Cancellation) tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENX” as the 4x mics are already equipped with the same and activated by default. Deliver your voice without interruptions anywhere- traffic, railway stations, airports, work space; literally anywhere!
SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears Step 2: Place the earbuds back into the charging case in correct orientation and close the lid The earbuds automatically switch off (and enter charging mode).
MANUAL POWER OFF
Step 1: Long touch CTC for 5 seconds (Left & Right separately) to
manually power off each earbuds.
Step 2. Once the earbuds get turned off, place them back inside the case
and close the lid,
FACTORY RESET
Perform the factory reset in case you feel any difficulty while operating your Immortal.
NOTE: Before performing reset, clear “Immortal 101” from pairing device
history by forgetting device
Step 1: Take out both the earbuds from the case
Step 2: Long touch CTC on both the earbuds for 5 seconds
Step 3: Place the earbuds inside the case, close the lid and wait for 5
seconds
Step 4: Take out the earbuds from the case and perform a fresh connection
Congratulations! Your Immortal 101 has been Reset
Specification
Headphone Type | TWS |
---|---|
Bluetooth Version | V5.3 |
Music Playtime | Up to 101-IRS per charge. Up to 20 % additional with Case (at |
60 volume
Number of ENes Equipped Mies| 4
IWP– Tech| Yes,
BEAST’ Mode| Yes 40ms low latency a
Transmission Range| 10m
Driver Size| 2 x10mm
Supported Codec| AAC/SBC
Frequency| 20 Hz-20Hz
Battery Charging Time| 300mAh (Case); 30mAh 2 (Earbuds
Charging Interface| USB Type C
Water Resistance| IPX4
Earbud’s Weight| 4g
WARNING
- Please follow the instructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the product away from heat sources, as the heat may damage it
- Don’t jam the ports such as charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life
Advisable: The earbuds may start at a 100% volume and it may need to be reduced when they are switched on at first. This can be done by using volume control on media device.