ARGOX iX4-280 Industrial Barcode Printer Installation Guide
- June 12, 2024
- ARGOX
Table of Contents
ARGOX iX4-280 Industrial Barcode Printer
Product Information
| Product Name | iX4-280/380 LK-200 Series |
|---|---|
| Revision Date | Jun. 2023 |
| Note | Specifications, accessories, parts and programs are subject to |
change without notice.
Version| v1.0
Manufacturer| Argox Information Co., Ltd.
Product Usage Instructions
- Start by unpacking the product and ensuring all the necessary components are present.
- Locate the peeler cable and the peeler connector.
- Identify the holes on the product and insert the peeler cable into the designated hole.
- Repeat step 3 for the second hole if applicable.
- Connect the peeler cable to the peeler connector.
- Repeat steps 3-5 for any additional peeler cables or connectors.
- Ensure all connections are secure and properly inserted.
- Refer to the product manual for any additional setup or configuration steps.
- Once the product is properly set up, it is ready for use.
Installation Instruction
Note: Specifications, accessories, parts and programs are subject to change without notice.
Argox Information Co., Ltd
- ADDRESS: 8F., No. 28, Baogao Rd., Xindian Dist., New Taipei City 231029, Taiwan (R.O.C.)
- Tel: +886-2-8912-1121
- Fax: +886-2-8912-1124
- https://www.argox.com
- https://www.youtube.com/user/argoxmkt
Copyright © 2023. Argox Information Co., Ltd. All Rights Reserved.
References
Read User Manual Online (PDF format)
Loading......