SIKO SATSSTK SAT Shower System Instruction Manual
- June 12, 2024
- SIKO
Table of Contents
SIKO SATSSTK SAT Shower System
Product Information
The product is a SATSSTK SATSSTKC, designed for cleaning and maintenance purposes. It is manufactured by SIKO KOUPELNY a.s. The product is made in P.R.C. and imported by SIKO KOUPELNY a.s.
Product Usage Instructions
To ensure proper usage and avoid damage, please follow these instructions:
- When cleaning the fittings and showers, do not use cleaning powders, sponge pads, or microfiber cloths with an abrasive effect.
- Use the specified cleaner dosage and contact time recommended for the product.
- Rinse the surfaces with clean water after using liquid soaps, shampoos, and shower foams to avoid damage.
- If the surfaces are already damaged, they must be exchanged to prevent further deterioration under the effect of cleansers.
- Improper treatment that causes damage will not be covered by the guarantee.
- Install filtration equipment distribution (corner valve filter) as per the guarantee terms.
Please contact info@siko.cz or visit www.swatec.ch for more information about the product.
PRODUCT DIMENSION
INSTALLATION INSTRUCTION
PART LIST
| 1-11 | NDSSTKTERMSET |
|---|---|
| 12-13 | NDSSTK12 |
| 15 | NDSSTKPREP |
| 16-21 | NDSSTK20 |
| 13, 22-24 | NDSSTK24 |
| 28 | NDSIKOBSTPREVLMAT |
| 30-31 | NDSIKOBSTROZETASET |
| 33 | NDSSTKJEZDEC |
| 34 | SATHADICE |
| 35 | SATBSRS36 |
| 36 | SATBSHS36 |
| 1-11 | NDSSTKCTERMSET |
| --- | --- |
| 12-13 | NDSSTK12C |
| 15 | NDSSTKPREP |
| 16-21 | NDSSTK20C |
| 13, 22-24 | NDSSTK24C |
| 28 | NDSIKOBSTPREVLMATC |
| 30-31 | NDSIKOBSTROZETASETC |
| 33 | NDSSTKCJEZDEC |
| 34 | SATBSHPBW |
| 35 | SATBSRS37C |
| 36 | SATBSHS37C |
Cleaning Recommendation
To avoid damage and reclamations, it is necesary to consider certain criteria when cleaning.At the cleaning of the fittings and showers, in principle, it must be pointed out:
-
Only use cleaning material which is explicitly provided for this type of application.
-
Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they cause considerable damage.
-
Phosphorus acidic cleaners are only conditionally applicable.
-
Mixing cleaning agents is not permitted, generally.
-
Never use cleaning materials or appliances with an abrasive effect, such as unsuitable clearing powders, sponge pads or micro fibre cloths.
-
The instructions of the cleaning agent manufacturers have to be followed absolutely.
-
Cleaning has to be carried out with a specified cleaner dosage, contact time, object-related and adapted to the needs.
-
The building up of calcifications has to be removed by cleaning regulary.
-
When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
-
After cleaning rinse thoroughly with clean water to remove any cleaner residue.
-
The use of steam cleaners is not permitted. The high temperatures can damage the products.
Important- Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using.
- The damage of already damaged surfaces will deteriorate under the effect of the cleansers. Components with damaged surfaces must be exchanged, otherwise there could be an injury danger.
- Damage caused by improper treatment will not be covered by guarantee.
- Under terms of the guarantee is necessary to install filtration equipment distribution (corner valve filter).
SAFETY INSTRUCTION
ABOUT COMPANY
- SAT R is registered trademark of
- Swiss Aqua Technologies AG
- Gewerbestrasse 9, 6330 Cham, Switzerland
- www.swatec.ch
- Imported by SIKO KOUPELNY a.s.
- Made in P.R.C.