coolpo CP-S23D Ignite Headset User Manual

: June 28, 2024
: coolpo

Table of Contents

aRSLN POST COMPLETE

coolpo CP-S23D Ignite Headset

aRSLN POST COMPLETE

Welcome

Thank you for choosing the Coolpo IGNITE headset! Experience the future of audio with these features:

Al-powered microphone to remove background noise.
Bluetooth connectivity for music and calls on the go.
Exceptional sound quality for business and leisure.
Ultralight design for all-day comfort.
Enjoy productivity and enterta inment in one sleek package. Welcome to the Coolpo IGNITE experience!

Overview

How to Wear

Adjustable head-mounted for the perfect fit
Rotate the microphone up to MUTE microphone
Rotate down to unmute and speak

What the buttons do

Right Ear Buttons/Controls

Long press for 3 seconds to switch on:
Long press for 5 seconds to switch off

Press the volume plus or minus buttons

Activate the phone voice assistant

Answer call	Press the central round button once
Hang up an ongoing call	Press the central round button once
Reject a call	Press the central round button twice
Play/pause the music	Press the central round button once to play/pause music

Next music	Long press the volume ‘+’ button
for 2 seconds	Previous music
Long press the volume •-• button	for 2 seconds
Battery reminder	The voice prompt will inform you of
the battery level automatically	Low Battery
Warning	(20% battery)
A1utomatic Voice Playback	Low Power warning
before shutdown	(5% power)
Automatic Voice Playback	Lowest volume
Indicator	Automatic Voice Playback

Bluetooth reconnection/ disconnect| When powered on. Bluetooth connects automatically. Upon successful pairing, the headset plays ‘Connected.’ and upon disconnection. it plays ‘Disconnected
---|---
Bluetooth reconnection or new connection| When in power-on mode, long press for 3 seconds to enter pairing mode and you will hear ‘Bluetooth Pairing.’ Upon successful pairing. it plays ‘Pairing successful
Auto power-off| If the device is powered on. it will automatically shut down after 15 minutes of unuse

Left Ear Touch Button

Al Noise Reduction Switch

Switch On	Double tap the side bar
Switch Off	Double tap the side bar

Mute/un-mute microphone

Rotate the microphone up to MUTE microphone/down to UNMUTE

More information

Audio Chip
Qualcomm + Al audio chip

Bluetooth range
10m

Frequency range
2.402GHZ-2480GHZ

Weight
160g

Battery time
Music 35h (50% volume)

Deep Al mode
7h

Battery capacity
400mAh

Charging wire
TYPE-C

LED
Blue, white

Bluetooth protocol
Bluetooth v5.2

Microphone sensitivity
-47±3dB(directional )

Nominal impedence
320 ±15%

Speaker sensitivity
ll9±3dB Ac 1000 Hz At 0.178V
Based on : CRY6l35LRT

Speaker rated power
Rated Povver Input lOmW.
1Vlax Power Input 30mVI/

Speaker frequency range
20HZ- l0KHZ At 0178V
Based on: CRY6135LRT

Audio protocol
MC, SBC , APTX. adaptive

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wi ll not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction .

Support

Brand: Coolpo Company: Shanghai LiwCV Co., Ltd. Address: 8215, Jiuzhou Center, No. 95, Lane 85, Cailun Road, Pudong New Area, Shanghai, China

Website: https://www.coolpo.io/
Support: Girlen@coolpo.io
Tel: +1(833)656-0789
[EST :09:00-17:00/PDT:06:00-14:00;
Mondays through Fridays] Copyright shanghai LiwCV Co., Ltd. All Rights Reserved