SIKO SATBSFU222KPU Bath Mixer SAT Fusion Instruction Manual
- June 12, 2024
- SIKO
Table of Contents
SIKO SATBSFU222KPU Bath Mixer SAT Fusion Instruction Manual
Mounting Instruction
-
SATBSFU271
-
SATBSFU285
-
SATBSFU222
-
SATBSFU268
SATBSFU271
SATBSFU285
SATBSFU222
SATBSFU268
SATBSFU222, SATBSFU268, SATBSFU271, SATBSFU285
SATBSFU222, SATBSFU268, SATBSFU271, SATBSFU285
SATBSFU271
| 1 | NDSIKOBSEL2 |
|---|---|
| 3 | NDSIKOBSEL3 |
| 5 | NDSIKOBSEL6 |
| 6 | NDSATFU6 |
| 7 | NDSATFU7 |
SATBSFU285
| 1 | NDSIKOBSEL2 |
|---|---|
| 2 | NDSIKOBSEL3 |
| 5 | NDSIKOBSEL6 |
| 6 | NDSATFU6 |
| 7 | NDSATFU7 |
SATBSFU222
| 1 | NDSIKOBSELNB2 |
|---|---|
| 2 | NDSATFUNB2 |
| 4 | NDSIKOBSELNB12 |
| 5 | NDSATFUNB5 |
| 6 | NDSIKOBSELNB10 |
| 7 | NDSATFUNB7 |
| 8 | NDSATFUNB8 |
SATBSFU268
| 1 | NDSIKOBSELNB2 |
|---|---|
| 2 | NDSATFUNB2 |
| 4 | NDSIKOBSELNB12 |
| 5 | NDSATFUNB5 |
| 6 | NDSIKOBSELNB10 |
| 7 | NDSATFUNB7 |
| 8 | DSATFUNB8 |
Cleaning Recommendation
To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. At the cleaning of the fittings and showers, in principle, it must be pointed out:
- is explicitly provided for this type of application.
- Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they cause considerable damage.
- Phosphorus acidic cleaners are only conditionally applicable.
- Mixing cleaning agents is not permitted, enerally.
- Never use cleaning materials or appliances with an abrasive effect, such as unsuitable clearing powders, sponge pads or micro fibre cloths.
- The instructions of the cleaning agent manufacturers have to be followed absolutely.
- Cleaning has to be carried out with a specified cleaner dosage, contact time, object-related and adapted to the needs.
- The building up of calcifications has to be removed by cleaning regulary.
- When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
- After cleaning rinse thoroughly with clean water to remove any cleaner residue.
- The use of steam cleaners is not permitted. The high temperatures can damage the products.
Important
Residues of liquid soaps, shampoos and shower foams can also cause damage, so
rinse with clean water after using. The damage of already damaged surfaces
will  deteriorate under the effect of the cleansers. Components with damaged
surfaces must be exchanged, otherwise there could be an injury danger.
Damage caused by improper treatment will not be covered by guarantee.
Under terms of the guarantee is necessary to install filtration equipment distribution (corner valve filter).
- SATBSFU222,
- SATBSFU268,
- SATBSFU271,
- SATBSFU285
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>