SIKO SATBWI140MSPRC Walk-In Shower Screen-Door Instruction Manual

SIKO SATBWI140MSPRC Walk-In Shower Screen-Door

Product Information

The product is available in different models:

• SIKOWI80, SIKOWI80KS, SIKOWI80MR
• SIKOWI90, SIKOWI90KS, SIKOWI90MR
• SIKOWI100, SIKOWI100KS, SIKOWI100MR
• SIKOWI110, SIKOWI110KS, SIKOWI110MR
• SIKOWI120, SIKOWI120KS, SIKOWI120MR
• SIKOWI140, SIKOWI140KS, SIKOWI140MR
• SIKOWIPROFIL, SIKOWIPROFILC
• SIKOZAV2, SIKOZAV2C

The product has a pH range of 6.8 to 7.2 and can also operate at pH7.2.

Product Usage Instructions

1. Ensure the pH of the water is between 6.8 and 7.2.
2. Select the appropriate model based on your requirements.
3. For models SIKOWI80/80KS/80MR, SIKOWI90/90KS/90MR, SIKOWI100/100KS/100MR, SIKOWI110/110KS/110MR, SIKOWI120/120KS/120MR, and SIKOWI140/140KS/140KS, follow the next steps.
4. For models SIKOWIPROFIL, SIKOWIPROFILC, follow the next steps.
5. For models SIKOZAV2, SIKOZAV2C, follow the next steps.
6. Adjust the specified setting to 1.
7. Set the distance to 4mm.
8. Adjust the specified setting to 1.
9. Set the value to 6.
10. Set the value to 7.
11. Set the distance range to 0-8mm.
12. Adjust the specified setting to 2.
13. Set the value to 8.
14. Adjust the specified setting to 3.
15. Set the value to L.
16. Set the value to Lmm.
17. Adjust the specified setting to 9.
18. Set the value to 10.
19. Set the value to 12.
20. Adjust the specified setting to 4.
21. Set the value to 4.
22. The following models require additional steps: SIKOWIROZKS, SIKOWIROZ, SIKOWIROZC, SIKOWIROZCKS
23. Ensure the pH of the water is between 6.8 and 7.2.
24. Set the value to 1.
25. Set the value to 3.
26. Set the value to 2.
27. Set the values to 4 and 7.
28. Set the values to 5 and 6.
29. Set the value to 8.
30. Set the value to 9.
31. Set the value to 1.
32. Set the value to RH or LH.
33. Set the value to 6.
34. Set the value to 8.
35. Set the value to 2.
36. Set the value to Voda.
37. Set the value to strana koutu.
38. Set the values to 5 and 5.
39. Set the value to 1.
40. Set the value to 3.
41. Set the value to 4.
42. Set the distance to 1.5mm.
43. Set the value to 4.
44. Set the value to 4.
45. Set the distance to 100mm x 100mm.

Tools Required

Dimensions

Installation Instructions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>