SOLARTECH POWER SPM005P Universal Side-of-Pole Mount Installation Guide
- June 12, 2024
- SOLARTECH POWER
Table of Contents
Solartech Power Universal Side-of-Pole Mount Installation Guide
SPM005P Universal Side-of-Pole Mount
Solartech Power Side-of-Pole Mount support solar panels: SPM005P, SPM010P, SPM020P, SPM030P
Component List
Part| Qty| ID code
Bracket| 1| 1
Arm| 1| 2
PV Module Clamps| 2| 3
Hose Clamps| 2|
M6 25 hex-cap bolt for Bracket| 4|
M6 25flat washer for Bracket| 8|
M6 25 split lock washer for Bracket| 4|
M6 25 hex nut for Bracket| 4|
M6 25 hex-cap bolt for Clamps| 4|
M6 25 flat washer for Clamps| 4|
M6 *25 split lock washer for Clamps| 4|
Step 1 – mounting the arm to the PV module
Insert a bolt, washer and PV module clamp through one of the slots.
Place a washer, lock washer and hex nut on the end of the bolt, and tighten
loosely.
Lay the PV Module face-down on a protected flat surface.
Center the arm on the back of the panel as shown and position the clamps under
the edges of the module’s flange.
Make sure that the clamp bolts are resting against the module’s flange before
tightening
Step 2 – attaching the bracket to the pole
Thread each hose clamp through one of the sets of narrow center holes and
place the bracket on the pole as shown.
Step 3 – attaching the panel/arm assembly to the bracket
Insert the bolt and flat washer from the inside out
Insert another bolt and flat washer from the inside out.
Adjust the tilt of the panel as desired, and tighten the bolts
| Mount Model No. | Apply Solar Panels Model No. |
|---|---|
| M530 | SPM005P, SPM010P, SPM020P, SPM030P, |
GAP005P, GAP010P, GAP020P, GAP030P,
M45P| SPM040P, SPM045P, GAP045P
M65P| SPM060P, SPM065P, GAP055P
PMS865, M685| SPM065P, SPM085P, SPM090P , GAP065P, GAP085P, GAP100P
M120S| SPM100P, SPM110P, SPM125P, SPM130P, SPM135P, SPM140P
GAP100P, GAP125P, GAP130P, GAP135P, GAP140P
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>