momentum Voya E+ Dual Mounting Kit User Manual
- June 12, 2024
- momentum
Table of Contents
momentum Voya E+ Dual Mounting Kit User Manual
Specifications
Material: aluminum
Color: Matt black
Weight: 100g
Package Contents
Front Fender hardware:
(F-a) 2 x M5*21 bolts
Rear Fender hardware:
(R-a) 2 x M510 bolts
(R-b) 1 x M5 clip set
(R-c) 1 x M516 bolts
(R-d) 1 x 10*9 washer
Warning
- Read all information in this manual carefully before you start using the rack and fender set. Safety instructions are very important and should not be overlooked. By reading the manual you will have a better understanding of the general operation.
- Only use the rack and fender set with supplied installation hardware.
- Do not modify the rack and fender set in any way.
- Periodically check all bolts are tight as vibrations may loosen them over time.
- Do not use the rack and fender set to move or lift the bike.
- If you are not confident with compatibility and installation of this product, please consult your local authorized dealer.
- Regulation can vary by country, and/or location, always check in advance.
Installation
-
Ensure the bike is switched off with kickstand engaged and is on level ground.
-
Remove any accessories that may interfere with the installation and/or use of the rack and fender set.
-
This Dual Mounting kit is the hardware set when you assemble the rack and fender set together.
Front fender: -
Both sides of front fork: Use a 4mm hex torque wrench to tighten two M5*21 bolts with 5-8Nm.
Rear fender: -
Assemble rear fender and U stay first with two M5*10 bolts and one M5 clip set with Phillips screwdriver.
(Note: do not fix the bolts at the same time. please tighten the upper bolt first, then fix the lower bolt. When completed, the clip set fully covered U stay) -
Assemble the rear rack and rear fender with one M516 bolts and 109 washer with 4mm hex torque wrench with 5-8Nm. (Note: please adjust the rear rack and rear fender to appropriate position, and make a hole on rear fender for the mounting point)
-
Double check if the rack and fender set are properly installed. The rack and fender set should not move or rotate in any direction.
Usage information
- Check if the rack and fender set are firmly mounted before every ride.
- Regulary check the state of the rack and fender set and mounting parts for any signs of looseness, deterioration, corrosion or other damage.
LIMITED PRODUCT WARRANTY INFORMATION
Giant Global Inc. warrants its products for a period of one (1) year from the date of purchase, this applies only for the original owner. This warranty applies only to this product when purchased new from an Authorized Giant Dealer and assembled by that dealer at the time of purchase.
LIMITED REMEDY
Unless otherwise provided, the sole remedy under the above warranty, or any
implied warranty, is limited to the replacement of defective parts with those
of equal or greater value at the sole discretion of Giant Global Inc.
This warranty extends from the date of purchase, applies only to the original
owner, and is not transferable. In no event shall Giant Global Inc. be
responsible for any direct, incidental or consequential damages, including,
without limitation, damages for personal injury, property damage, or economic
losses, whether based on contract, warranty, negligence, product liability, or
any other theory.
EXCLUSIONS
The above warranty, or any implied warranty, does not cover:
- Normal wear and tear on parts in situations where there are no assembly or material defects.
- Products serviced by other than an Authorized Giant dealer.
- Modifications of the product from its original condition.
- Use of this product for abnormal, competition and/or commercial activities or for purposes other than those for which this product was designed.
- Damage caused by failing to follow the User’s Manual.
- Paint, finish and decal damage resulting from taking part in competitions, jumping, downhill and/or training for such activities or events or as a result of exposing the product to, or operating the product in, severe conditions or climates.
- Labor charges for part replacement or changeover.
Except as is provided by this warranty and subject to all additional
warranties, Giant Global Inc. and its employees and agents shall not be liable
for any loss or damage whatsoever (including incidental and consequential loss
or damage caused by negligence or default) arising from or concerning any
Giant Global Inc. product.
Giant Global Inc. makes no other warranties, express or implied. All implied
warranties, including the warranties of merchantability and fitness for a
particular purpose are limited in duration to that of the express warranties
stated above.
Any claim against this warranty must be made through an Authorized Giant
Dealer or distributor. The purchase receipt or other proof of the date of
purchase is required before a warranty claim may be processed. Claims made
outside the country of purchase may be subject to fees and additional
restrictions. Warranty duration and details may differ by country.
This warranty gives you specific legal rights, and you may also have other
rights which may vary from place to place. THIS WARRANTY DOES NOT AFFECT YOUR
STATUTORY RIGHTS.
Disclaimer
To ensure safety, quality and reliability, use only original parts or Giant authorized replacements for repair and replacement. Giant is not responsible for any direct, incidental or consequential damages, including, without limitation, damages for personal injury, property damage, or economic losses due to improper use.
Momentum and its symbol are trademarks of Giant Group. All rights reserved.
