HARMAN TUNE and VIBE True Wireless Headphones User Guide
- June 8, 2024
- Harman
Table of Contents
TUNE and VIBE True Wireless Headphones
User Guide
WHAT’S IN THE BOX
https://register.jbl.com?utm_medium=US&utm_source=qsg
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH
THIS FREE APP.
https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
how to wear
- Try different sizes for a perfect fit and audio performance.
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT
CONTROLS
VOICEAWARE
power off
Manual SETUP
DO MORE WITH THE APP
Charging
Led behaviors
TECH SPEC
| Model: | VIBE BUDS |
|---|---|
| Driver size: | 8 mm/ 0.315” Dynamic Driver |
| Power supply: | 5 V 1 A |
| Earbud: | 4.5 g per pc (9 g combined)/ 0.0099 lbs per pc (0.0198 lbs combined) |
| Charging case: | 32.8 g/ 0.0723 lbs |
| Earbud battery type: | Lithium-ion polymer (47 mAh/ 3.8 V) |
| Charging case battery type: | Lithium-ion polymer (550 mAh/ 3.8 V) |
| Charging time: | <2 hrs from empty |
| Music playtime with BT on: | up to 8 hrs |
| Talk time: | 4.5 hrs |
| Frequency response: | 20 Hz – 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | 100 dB SPL@1 kHz |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | : -38 dBV/Pa@1 kHz |
| Bluetooth version: | 5.2 |
| Bluetooth profile version: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz – 2.4835 GHz |
| Bluetooth transmitter power: | <10 dBm |
| Bluetooth transmitter modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLVIBEBUDS) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is xxxxx W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLVIBEBUDS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth
SIG, Inc. and any use of such marks by HARMAN International Industries,
Incorporated is
under license. Other trademarks and trade names are those of their respective
owners.
FCC ID: APIJBLVIBEBUDS
IC: 6132A-JBLVIBEBUDS
IS 13252 (Part 1) /
IEC 60950-1 : 2005
R-41214817
www.bis.gov.in
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>