GAS MAX PT2-388 Crazy Heavy Horn Treble User Manual
- June 12, 2024
- GAS
Table of Contents
GAS MAX PT2-388 Crazy Heavy Horn Treble
PRODUCT INFORMATION
- MODEL NO. MAX PT2-388
- HARDCORE CAR AUDIO
SAFETY
- PLAY LOUD AND SAFE. Read through this information, follow the instructions and save the manual for future usage and reference.
- Do not expose the wiring to your new speaker to excessive damp or moisture. If the wiring is exposed it might result in electric failure, shock or damage to the product. Servicing is required when the product has been damaged in any way and/or doesn’t operate normally. Refer all servicing to qualified service personnel only.
- Keep the cables inside the vehicle separate from sharp edges or components that may be affected or take damage. Follow the recommended cable sizes and always use high quality cables and accessories. Even if you’re eager to put the speaker to use – take no shortcuts when installing the cables, make sure that all connectors are protected and secured.
- Do not drill any holes without checking what lies beneath, and don’t cut anything without making sure that no important components risk being damaged.
- There is a first time for everything, if you need help – ask a friend or contact your local GAS AUDIO POWER dealer/installer.
- We want you to experience your products to the MAX, but we don’t want you to injure yourself or others. Use common sense, respect high pressure levels & volume, follow your local laws and regulations.
To get the best performance out of your new speaker we strongly suggest to use a highpass filter with at least 12 dB slope.
Recommended cross-over: HPF@ 5000Hz (12dB/Oct) for PT2-388
UNPACKING
Unboxing your new MAX product is an experience, make sure that the tweeters
and all the accessories are included in the packaging:
DIMENSIONS
SPECIFICATION
Below you’ll find the specifications that has been checked and tested in our workshop. The specified sensitivity isn’t directly connected with the sound pressure in the vehicle, and shouldn’t be used as the sole indicator for comparison with other subwoofers.
HOW TO INSTALL TWEETER
Before installing your brand new tweeter, make sure that you have everything you need. Have the right tools ready, and make sure that you have the necessary knowledge/skill to perform the installation properly. Preparation and knowledge is crucial! Make sure to look through the recommended wiring schematics below. Take note of the impedance stability of your amplifier. Don’t be afraid to consult your local GAS AUDIO POWER dealer/installer if you have any questions.
FEATURES
In Sweden, we have the expression “lagom· for when things are in a moderate amount. In this aspect, the MAX PT2 tweeters are as far from Swedish as it can be! They were made to blow everyone’s mind and give the true next-level MAX experience.
WELCOME TO THE NEXT LEVEL
This beast of a tweeter will give you all the performance you’ll need. Made
with Macromolecule Composite (MMC) material for a really low distortion.
MORE THAN JUST A HUGE TWEETER
Experience every part of the tweeter spectrum all the way to – and beyond –
20.000 Hz. It’s a truly exciting tweeter with a dynamic and crisp sound that
delivers loads of details.
A NEW LEVEL OF SPL
You’ll want to dial that volume knob beyond 11. Going berserk demands two
things: tough materials and a cool design. The horn is made of aluminum with
black industrial sand paint to make it look as good as it plays.
WE’VE ADDED SOME EXTRAS
Take care of the things you love, so we’ve included a 6d8 passive crossover
with a 2uF 250V MKT capacitor to protect your new favorite tweeter. The S2
terminal lets you connect the speaker cables with flat pin connectors or fork
terminals .
SAFETY
This product is covered by warranty, depending on the conditions in the
country where it’s sold. If the speakers are returned for service, please
include the original dated receipt(or a copy)with the product. Make sure that
the speakers are packaged properly and secured, preferably in its original
packaging.
The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Don’t dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
GAS Audio Power products comply with the relevant pro Visions of the Ro HS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEEJ the product shouldn’t be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
GAS Audio Power is a global partner of the European Mobile Media Association, an organization that focus on promoting custom-made mobile media installations to consumers.
THANKS FOR JOINING GAS AUDIO POWER!
GAS AUDIO POWER and SHAKY are registered trademarks by Winn Scandinavia AB and is protected by relevant laws and jurisdictions such as Copyright and Trademark laws.
Winn Scandinavia AB I Elementviigen 15, 70227 irebro, Sweden I www.winnscandinavia.com
Winn Scandinavia AB reserves for possible typos, and factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>