Weiduli S3 Mobile Power iWatch User Manual
- June 12, 2024
- WEIDULI
Table of Contents
Weiduli S3 Mobile Power iWatch User Manual
Specifications
Product name: Mobile Power iWatch wireless charging
Product model: S3
Product capacity: 5000mAh
Type-c input: 5V=2A
Type-c in/output cable: 5V=2.4A
Lightning output cable: 5V =2.4A
iWatch charging power: 2.5W
Product size: 7665.920.3±0.1mm
Charging Instruction
-
This product is connected to a Type-C interface device such as a plug-in, put the watch above the wireless charging area and it can be automatically attached to the surface of the product to start wireless charging.
-
Put the watch above the wireless charging area and it can be automatically attached to the surface of the product to start wireless charging.
-
After connecting the mobile phone with the data cable, put the watch above the wireless charging area at the same time, and the watch can be automatically affixed to the surface of the product, which can realize the watch and the mobile phone charging at the same time.
Power bank function description
-
Switch function
Click the switch button, the wireless function starts working; double-click the switch, stop working -
Enable wireless charging
In the process of use, after clicking the button, the fifth light shows green for the standby state of the power bank. After 3-4 seconds, the green light will turn out. After adsorption of the watch, the light will turn green, indicating that the wireless charging function of the mobile power supply has been enabled. -
Check the remaining battery
Click the button, if one white light is on, it means the power is within 25%, if two white lights are on, it means the power is within 50%, if three white lights are on, it means the power is within 75%, and if four white lights are on, it means the power is within 100%. When the last light of the battery indicator flashes, the battery is less than 5%, please charge it as soon as possible.
Precautions
- Please charge the battery at least once every 3 months if it does not be used for a long time. During the use of this device, it will be slightly hot, but it is normal.
- Always keep the product dry and do not use chemical agents for cleaning and scrubbing. Please protect our environment, recycle this device at the designated location.
- Children or persons who are not equipped to use this device alone must use this device under the supervision of an adult.
- Do not bump, disassemble, pierce, crush, or expose this device to moisture.
- Do not apply this power bank to devices that do not meet the output parameter requirements, it may cause malfunction or fire.
Packaging List
- Mobile power*1
- Manual*1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.